Simulation and experimental investigation on water meter housing using FV method

by Abidin A.B.Z.; Manurung Y.H.
Published in Applied Mechanics and Materials (2013)

Development and Analysis of an Optimized Heat Source Model for Wire Arc Additive Manufacturing Using Numerical Simulation

by Nordin N.; Choo H.L.; Singh A.; Ku P.X.; Manurung Y.H.P.; Mat M.F.; Muhammad N.; Sued M.K.; Manurung C.S.P.
Published in 2024 1st International Conference on Robotics, Engineering, Science, and Technology, RESTCON 2024 (2024)

Effect of artificial ageing temperature in t6-heat treatment on the mechanical properties of dissimilar metals weld between aa5083 and aa6063

by Setyawan H.; Muhayat N.; Yuliadi M.Z.; Manurung Y.H.P.; Triyono
Published in Archives of Materials Science and Engineering (2023)

Numerical Analysis of Single Edge Notched Tension Specimen with Fatigue Crack Parameter of Conventional Specimen Using Linear Elastic Fracture Mechanics

by Busari Y.O.; Abdullah S.; Manurung Y.H.P.; Shuaib-Babata Y.L.
Published in International Journal of Integrated Engineering (2021)

Structural Performance of Ti6Al4V Tibial Tray in Total Knee Arthroplasty (TKA) by Functionally Graded Lattice Structures using Numerical Analysis

by Rabuan N.; Adenan M.S.; Manurung Y.H.P.; Anuar M.A.M.; Shuib S.
Published in Journal of Mechanical Engineering (2023)

Simulation of Residual Stress and Distortion on Additively Manufactured SS316L Specimens Using Inherent Strain Method

by Taufek T.; Sulaiman S.A.; Manurung Y.H.P.; Adenan M.S.; Ahmad S.N.
Published in Lecture Notes in Mechanical Engineering (2021)

Predicting bead geometry of 2F-fillet joint welded by small wire SAW

by Hamidi S.H.A.; Tham G.; Manurung Y.H.P.; Abas S.K.
Published in Advanced Materials Research (2012)

Analysis on Coupled Forming-Welding Process Using FEM Simulation and Experimental Verification

by Bauer A.; Manurung Y.H.P.; Redza M.R.M.; Joeran; Graf M.; Birgit
Published in Journal of Physics: Conference Series (2020)

A Bibliometric Analysis of the Global Trend of Residual Stress Induced by WAAM Process and Stress Relief Heat Treatment

by Ghazali S.N.M.; Ibrahim M.H.I.; Manurung Y.H.P.; Miranda F.
Published in Journal of Advanced Research in Applied Sciences and Engineering Technology (2025)

PREDICTION OF FATIGUE IN RAIL PAD USING SIMULATION

by Amran, Muhammad Faiz Anuar; Wahab, Abdul Malek Abdul; Manan, Nor Fazli Adull; Manurung, Yupiter Hp
Published in JURNAL TEKNOLOGI-SCIENCES & ENGINEERING (2024)

3D Metal Printing Using Generative Design and Numerical Computation

by Taufek T.; Adenan M.S.; Manurung Y.H.P.; Sulaiman S.A.; Zaid N.S.; Romzi N.A.S.
Published in Lecture Notes in Mechanical Engineering (2021)

Analysis of material property models on WAAM distortion using nonlinear numerical computation and experimental verification with P-GMAW

by Manurung Y.H.P.; Prajadhiana K.P.; Adenan M.S.; Awiszus B.; Graf M.; Haelsig A.
Published in Archives of Civil and Mechanical Engineering (2021)

PREDICTION OF FATIGUE IN RAIL PAD USING SIMULATION

by Amran M.F.A.; Abdul Wahab A.M.; Adull Manan N.F.; Manurung Y.H.
Published in Jurnal Teknologi (2024)

Effect of tools rotational speed on the mechanical properties of one-step double-acting friction stir welded aluminum alloy AA 6061 hollow panel

by Hilmawan M.I.; Putri E.D.W.S.; Muhayat N.; Manurung Y.H.P.; Ilhamdi; Sulardjaka; Hendrato; Triyono
Published in International Journal of Lightweight Materials and Manufacture (2024)

Modeling and Simulation of Additively Manufactured Cylindrical Component Using Combined Thermomechanical and Inherent Strain Method with Nelder-Mead Optimization

by Taufek T.; Manurung Y.H.P.; Adenan M.S.; Akma S.; Choo H.L.; Louhichi B.; Bednardz M.; Aziz I.
Published in 3D Printing and Additive Manufacturing (2023)

Life enhancement of transverse fillet weld on welds of HSLA S460G2+M using HFMI/PIT

by Andud D.; Mohd Kamal M.I.N.; Manurung Y.H.P.; Ghazali F.A.; Zain N.M.
Published in International Journal of Engineering and Advanced Technology (2019)

Numerical simulation of distortion and phase transformation in laser welding process using MSC Marc/Mentat

by Sebayang D.; Manurung Y.H.P.; Ariri A.; Yahya O.; Wahyudi H.; Sari A.K.; Romahadi D.
Published in IOP Conference Series: Materials Science and Engineering (2018)

Numerical computation for prediction of grain growth on stainless steel 316L

by Muhammad N.; Manurung Y.H.P.; Mat M.F.; Abdul Ghani M.S.; Graf M.; Adams T.-E.; Kassim K.; Adenan S.
Published in IOP Conference Series: Materials Science and Engineering (2020)

Modeling and optimization of weld zone development in resistance seam welding

by Muhammad N.; Manurung Y.H.P.; Jaafar R.; Abas S.K.; Tham G.; Rahim M.R.A.; Mansor A.
Published in Advanced Materials Research (2012)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies

by Mohd Mansor M.S.; Raja S.; Yusof F.; Muhamad M.R.; Manurung Y.H.; Adenan M.S.; Hussein N.I.S.; Ren J.
Published in Journal of Materials Research and Technology (2024)