A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation

An amplification for single pass operation was demonstrated by using Zirconia-based erbium-doped fiber (Zr-EDF). 1 m is the optimum length due to overall high gain and minimal noise figure from 1520 nm to 1620 nm. The highest gain is 28.62 dB at 1555 nm with the input signal and pump power are fixed...

Full description

Bibliographic Details
Published in:Jurnal Teknologi
Main Author: Markom A.M.; Ahmad H.; Harun S.W.
Format: Article
Language:English
Published: Penerbit UTM Press 2016
Online Access:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84960084456&doi=10.11113%2fjt.v78.7458&partnerID=40&md5=590adb1d3140d3285e537b6489389867
id 2-s2.0-84960084456
spelling 2-s2.0-84960084456
Markom A.M.; Ahmad H.; Harun S.W.
A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
2016
Jurnal Teknologi
78
3
10.11113/jt.v78.7458
https://www.scopus.com/inward/record.uri?eid=2-s2.0-84960084456&doi=10.11113%2fjt.v78.7458&partnerID=40&md5=590adb1d3140d3285e537b6489389867
An amplification for single pass operation was demonstrated by using Zirconia-based erbium-doped fiber (Zr-EDF). 1 m is the optimum length due to overall high gain and minimal noise figure from 1520 nm to 1620 nm. The highest gain is 28.62 dB at 1555 nm with the input signal and pump power are fixed at -30 dBm and 130 mW, respectively. At input signal -10 dBm, a wide and flat-gain of 19.36 dB is obtained with very small variation gain of 0.27 dB from 1530 nm to 1570 nm. Meanwhile, the noise figure for both input signals were maintained below than 12 dBm for the specific regions. © 2016 Penerbit UTM Press. All rights reserved.
Penerbit UTM Press
1279696
English
Article

author Markom A.M.; Ahmad H.; Harun S.W.
spellingShingle Markom A.M.; Ahmad H.; Harun S.W.
A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
author_facet Markom A.M.; Ahmad H.; Harun S.W.
author_sort Markom A.M.; Ahmad H.; Harun S.W.
title A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
title_short A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
title_full A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
title_fullStr A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
title_full_unstemmed A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
title_sort A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
publishDate 2016
container_title Jurnal Teknologi
container_volume 78
container_issue 3
doi_str_mv 10.11113/jt.v78.7458
url https://www.scopus.com/inward/record.uri?eid=2-s2.0-84960084456&doi=10.11113%2fjt.v78.7458&partnerID=40&md5=590adb1d3140d3285e537b6489389867
description An amplification for single pass operation was demonstrated by using Zirconia-based erbium-doped fiber (Zr-EDF). 1 m is the optimum length due to overall high gain and minimal noise figure from 1520 nm to 1620 nm. The highest gain is 28.62 dB at 1555 nm with the input signal and pump power are fixed at -30 dBm and 130 mW, respectively. At input signal -10 dBm, a wide and flat-gain of 19.36 dB is obtained with very small variation gain of 0.27 dB from 1530 nm to 1570 nm. Meanwhile, the noise figure for both input signals were maintained below than 12 dBm for the specific regions. © 2016 Penerbit UTM Press. All rights reserved.
publisher Penerbit UTM Press
issn 1279696
language English
format Article
accesstype
record_format scopus
collection Scopus
_version_ 1825722586491781120