Three-dimensional (3D) evaluation of liquid distribution in shake flask using an optical fluorescence technique

QR Code

Three-dimensional (3D) evaluation of liquid distribution in shake flask using an optical fluorescence technique

Background: Biotechnological development in shake flask necessitates vital engineering parameters e.g. volumetric power input, mixing time, gas liquid mass transfer coefficient, hydromechanical stress and effective shear rate. Determination and optimization of these parameters through experiments ar...

Full description

Bibliographic Details
Published in:	Journal of Biological Engineering
Main Author:	Azizan A.; Büchs J.
Format:	Article
Language:	English
Published:	BioMed Central Ltd. 2017
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85026773606&doi=10.1186%2fs13036-017-0070-7&partnerID=40&md5=1f291a3edc72990850be9a0b510dcb2f

Similar Items

Validation of computational fluid dynamics of shake flask experiments at moderate viscosity by liquid distributions and volumetric power inputs
by: Dinter C.; Gumprecht A.; Menze M.A.; Azizan A.; Niehoff P.-J.; Hansen S.; Büchs J.
Published: (2024)

Validation of computational fluid dynamics of shake flask experiments at moderate viscosity by liquid distributions and volumetric power inputs
by: Dinter, et al.
Published: (2024)

Three-Dimensional (3D) Printing in the Case of a Concurrent Polyp and an Ectopic Tooth
by: Rajendram, et al.
Published: (2024)

Investigation on the Effect of Fluorescence Material based on D-Shaped Hollow Core Photonic Crystal Fiber
by: Zainuddin N.A.M.; Saleh Falah A.A.; Mokti M.H.; Zakaria R.; Jusoh Z.; Wong W.R.
Published: (2023)

Improved of Smart Vacuum Flask with Beverage Identifier and Temperature Indicator
by: Apok M.A.; James W.A.; Abidin A.F.Z.; Hasim S.H.; Omar N.H.; Ibrahim T.N.T.
Published: (2020)

Simulation of Three-Dimensional Images and Estimation of Lung Volumes from Two-Dimensional MRI and CT Images
by: Binti Indera Putera S.H.; Bin Dzulkifli M.R.; Sidek N.B.; Abu Bakar Z.B.; Binti Mohammad N.N.
Published: (2022)

Development of fluorescent tube antenna array for Wi-Fi application
by: Hilmi M.; Ali M.T.; Ya'Acob N.; Zali H.M.; Ja'Afar H.
Published: (2015)

Comparison of cooling methods on denture base adaptation of rapid heat-cured acrylic using a three-dimensional superimposition technique
by: May L.; John J.; Seong L.; Abidin Z.; Ibrahim N.; Danaee M.; Mohd N.
Published: (2021)

Evaluation of age variation changes in cervical vertebrae: 2-Dimensional (2D) geometric morphometrics approach
by: Mohd Fauad M.F.; Ku Mohd Noor K.M.; Alias A.; Choy K.W.; Ng W.L.; Chung E.; Wu Y.S.; Norman N.H.
Published: (2023)

Three-dimensional analysis of reconstructed skulls using three different open-source software versus commercial software
by: Yap Abdullah J.; Manaf Abdullah A.; Zaim S.; Hadi H.; Husein A.; Ahmad Rajion Z.; Malin Abdullah J.
Published: (2024)

Reconfigurable plasma antenna array by using fluorescent tube for Wi-Fi application
by: Ja'Afar H.; Ali M.T.; Dagang A.N.; Ibrahim I.P.; Halili N.A.; Zali H.M.
Published: (2016)

Excitation and emission properties of poly(n-carbazole)/poly(vinylpyrrolidone) blends characterized by fluorescence spectroscopy
by: Alias A.N.; Kudin T.I.T.; Zabidi Z.M.; Harun M.K.; Ali A.M.M.; Yahya M.Z.A.
Published: (2013)

Unsteady Three-Dimensional Flow in a Rotating Hybrid Nanofluid over a Stretching Sheet
by: Mohd Sohut N.F.H.; Soid S.K.; Abu Bakar S.; Ishak A.
Published: (2022)

Three-dimensional data quality assessment: Unmanned aerial vehicle photogrammetry and mobile laser scanner
by: Abbas M.A.; Zainuddin K.; Darwin N.; Azmi M.A.A.M.; Opaluwa Y.D.; Sulaiman S.A.; Hashim N.M.
Published: (2021)

Photocatalytic Degradation of Phenol using Copper-Doped Graphitic Carbon Nitride under Fluorescent and Sunlight Irradiation
by: Norhisan N.I.; Alias S.H.; Tarmizi N.N.A.A.; Baharin S.N.A.; Al Faridzy Akbar S.; Ghazali S.A.I.S.M.; Nur H.
Published: (2024)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
by: Al-Jeznawi D.; Mohamed Jais I.B.; Albusoda B.S.; Alzabeebee S.; Keawsawasvong S.; Forcellini D.
Published: (2023)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
by: Al-Jeznawi, et al.
Published: (2023)

A validated size exclusion chromatography method coupled with fluorescence detection for rapid quantification of bevacizumab in ophthalmic formulations
by: Jirjees F.; Soliman K.; Wang Y.; Sonawane R.; Sheshala R.; Jones D.; Thakur R.R.S.
Published: (2019)

Three-dimensional mapping of an ancient cave paintings using close-range photogrammetry and terrestrial laser scanning technologies
by: Majid Z.; Ariff M.F.M.; Idris K.M.; Yusoff A.R.; Aspuri A.; Abbas M.A.; Zainuddin K.; Ghani A.R.A.; Ardi R.
Published: (2017)

A review of dimension reduction techniques for classification on high-dimensional data
by: Hasan S.N.S.; Jamil N.W.; Ahmat H.
Published: (2023)

Reliability of Three-Dimensional Micro-Computed Tomography Root Canal Analysis Using Drishti Software: A Pilot Study
by: Iwani, et al.
Published: (2024)

Microcalcifications segmentation using three edge detection techniques
by: Yasiran S.S.; Jumaat A.K.; Abdul Malek A.; Hashim F.H.; Dhaniah Nasrir N.; Azirah Sayed Hassan S.N.; Ahmad N.; Mahmud R.
Published: (2012)

Comparative Performance Evaluation of Efficiency for High Dimensional Classification Methods
by: Okwonu F.Z.; Ahad N.A.; Ogini N.O.; Okoloko I.E.; Husin W.Z.W.
Published: (2022)

Enhancement of power quality in distribution system using D-STATCOM
by: Ismail N.; Abdullah W.N.W.
Published: (2010)

Investigation of U-shaped plastic optical fiber as refractive index sensor for liquids assessment
by: Supian, et al.
Published: (2023)

Investigation of U-shaped plastic optical fiber as refractive index sensor for liquids assessment
by: Supian L.S.; Sahroni N.H.M.; Ping C.S.; Naim N.F.; Ramza H.
Published: (2023)

Three-dimensional surface area analyses of developing maxillary second premolar root apices for age estimation using CBCT images
by: Gohain M.; Asif M.K.; Nambiar P.; Mohd Noor N.S.; Hidayah Reduwan N.; Ibrahim N.
Published: (2024)

Three-dimensional surface area analyses of developing maxillary second premolar root apices for age estimation using CBCT images
by: Gohain, et al.
Published: (2024)

Numerical and statistical analyses of three-dimensional non-axisymmetric Homann's stagnation-point flow of nanofluids over a shrinking surface
by: Wahid N.S.; Mustafa M.S.; Arifin N.M.; Pop I.; Anuar N.S.; Khashi'ie N.S.
Published: (2024)

Advanced design of columnar-conical feeler-type optical three-axis tactile sensor
by: Ohka M.; Tsunogai A.; Kayaba T.; Abdullah S.C.; Yussof H.
Published: (2014)

Integrated monte carlo-evolutionary programming technique for distributed generation studies in distribution system
by: Abas N.A.S.; Musirin I.; Jelani S.; Mansor M.H.; Honnoon N.M.S.; Othman M.M.
Published: (2019)

Synthesis and characterization of p-dimethylaminobenzaldehyde benzoylthiourea and study towards selective and sensitive fluorescent sensor for detection of iron (III) cation in aqueous solution
by: Hasan S.; Hamedan N.A.; Razali A.A.A.; Uyup N.H.; Zaki H.M.
Published: (2017)

Quasi-distributed sol-gel coated fiber optic oxygen sensing probe
by: Zolkapli M.; Saharudin S.; Herman S.H.; Abdullah W.F.H.
Published: (2018)

3D accident reconstruction using low-cost imaging technique
by: Osman M.R.; Tahar K.N.
Published: (2016)

The Influence of UAV Altitudes and Flight Techniques in 3D Reconstruction Mapping
by: Zulkifli M.H.; Tahar K.N.
Published: (2023)

Trace Determination of Phenanthrene and Fluorene in Beverages Using D-μ-SPE and Liquid Chromatography Analysis
by: Anwar F.M.; Ibrahim W.N.W.; Zaini N.; Hanapi N.S.M.; Kamaruzaman S.; Anis A.L.
Published: (2024)

Three-dimensional particle swam optimisation of Mel Frequency Cepstrum Coefficient computation and multilayer perceptron neural network for classifying asphyxiated infant cry
by: Zabidi A.; Mansor W.; Khuan L.Y.; Yassin I.M.; Sahak R.
Published: (2011)

Sensitivity-enhancing All-in-type Optical Three-axis Tactile Sensor Mounted on Articulated Robotic Fingers
by: Takagi A.; Yamamoto Y.; Ohka M.; Yussof H.; Abdullah S.C.
Published: (2015)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
by: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
Published: (2023)

Evaluation of nerf 3d reconstruction for rock art documentation
by: Zainuddin K.; Ghazali M.D.; Marzukhi F.; Samad A.M.; Ariff M.F.M.; Majid Z.
Published: (2024)