Design, Develop and Simulate Microdrilling Cutting Tool

QR Code

Design, Develop and Simulate Microdrilling Cutting Tool

Microdrilling has an important role in the world of modern industry, especially in terms of miniaturizing existing products or components. Through this research explain the design, development of design and simulate microdrilling cutting tools. By using four geometries that are different from the pr...

Full description

Bibliographic Details
Published in:	IOP Conference Series: Materials Science and Engineering
Main Author:	Siregar I.; Saedon J.B.; Adenan M.S.; Azmi M.F.M.; Harun A.F.B.
Format:	Conference paper
Language:	English
Published:	Institute of Physics Publishing 2019
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85069041148&doi=10.1088%2f1757-899X%2f505%2f1%2f012094&partnerID=40&md5=e848a8e27b8a45042514c471f9b72399

Similar Items

Tool wear investigation in drilling titanium alloy
by: Siregar I.; Saedon J.B.; Adenan M.S.; Nor N.M.; Azmi M.F.M.; Jamaludin M.H.B.
Published: (2019)

Contact Phenomena in Micromachining: Modelling and Simulation
by: Siregar I.; Saedon J.B.; Adenan M.S.; Nor N.M.; Pazai N.M.I.M.
Published: (2019)

Multifiring endoclip conceptual design using cad approach
by: Siregar I.; Adenan M.S.; Ariffin A.C.; Saedon J.B.; Asro H.
Published: (2019)

Improvement of endoclip design using 3D CAD approach
by: Siregar I.; Izham M.I.C.; Ariffin A.C.; Adenan M.S.; Saedon J.B.
Published: (2020)

Prediction of Cutting Forces for Machine Tools by Neural Networks
by: Kataraki P.S.; Ishak A.; Mazlan M.; Qasem I.; Hussien A.A.; Zubair A.F.; Janvekar A.A.
Published: (2024)

Prediction of Cutting Forces for Machine Tools by Neural Networks
by: Kataraki, et al.
Published: (2024)

Determination of Priority Supply Chain Distribution Using DEMATEL Method in Instant Noodle Company
by: Siregar I.; Saedon J.B.; Mohd Shahriman A.
Published: (2019)

A Deep Study on Machining of Titanium Superalloys and its Cutting Tool Materials
by: Jakati S.; Kataraki P.S.; Koti V.; Qasem I.; Hussien A.A.; Janvekar A.A.; Zubair A.F.; Ishak A.
Published: (2024)

Finite Element Analysis of Stress-Strain Response at the Tool Pin during Friction Stir Process
by: Jaffarullah M.S.; Busu N.; Low C.Y.; Saedon J.B.; Armansyah; Shaari M.S.B.; Jaffar A.
Published: (2015)

Automated Batch Measurement of Nose Radii of Cutting Tools Using Machine Vision
by: Yeong L.T.; Peen W.Y.
Published: (2024)

Prediction and optimization of tool life in micromilling AISI D2 (∼62 HRC) hardened steel
by: Saedon J.B.; Soo S.L.; Aspinwall D.K.; Barnacle A.; Saad N.H.
Published: (2012)

FACTORS ASSOCIATED WITH CUT INJURIES AMONG RESTAURANT WORKERS: A SYSTEMATIC REVIEW
by: Yid M.F.M.; Nagaraju A.; Mohamad K.N.; Adnan S.R.B.; Dapari R.; Hassan M.R.; Dom N.C.; Rahim S.S.S.A.
Published: (2024)

Eliminating waste using lean tools and delmia quest simulation
by: Hashim S.M.; Rabilah R.; Shah A.M.
Published: (2019)

Potential of Bio-Metal Cutting Fluid from Treated Recycled Cooking Oil for Metal Cutting Fluid Application
by: Ahmad A.A.; Ghani J.A.; Haron C.H.C.
Published: (2022)

Modeling and influence of machining parameters on titanium aloy
by: Saedon J.B.; Jaafar N.; Jaafar R.; Saad N.; Kasim M.S.
Published: (2014)

Cutting Path-Associated Energy Consumption of Milling Machining Process
by: Rahman Hemdi A.; Md Ali U.F.; Mohamed Noor R.; Irwan Yahaya M.; Mahadzir M.M.; Faiz Zubair A.; Othman M.; Yola M.; Mat Saman M.Z.; Sharif S.
Published: (2020)

On Local Antimagic Chromatic Number of Graphs with Cut-vertices
by: Lau G.-C.; Shiu W.-C.; Ng H.-K.
Published: (2024)

Optimizing novel multi-scaled simulation method for deviation analysis of generatively designed aileron bracket using laser powder bed fusion
by: Manurung Y.H.P.; Taufek T.; Adenan M.S.; Hussein N.I.S.; Aminallah M.M.; Jamaludin F.I.; Papadakis L.; Sallem H.
Published: (2024)

Paper Cuttings Pattern Feature Extraction Based on Machine Vision
by: Chen J.; Wang K.; Daud W.S.A.W.M.
Published: (2024)

Occupational noise exposure and the effects on blood pressure of grass-cutting workers
by: Kamaruzzaman A.; Ibrahim T.A.; Sulaiman F.R.; Ismail I.
Published: (2021)

Aerodynamics Analysis of a Boomerang Blended-Wing-Body Unmanned Aerial Vehicle using Different Numerical Simulation Tools
by: Mutaali A.B.A.; Noryatim A.N.M.; Nasir R.E.M.; Hamid A.H.A.; Mokhtar A.S.
Published: (2024)

Enhancing WEDM Efficiency by Teaching–Learning-Based Optimization for Machining Process Parameter Optimization
by: Saedon J.B.; Othman M.F.; Mohamad Nor N.H.; Syawal M.S.M.; Meon M.S.; Raghazli M.
Published: (2024)

Characterisation of polysaccharide composite incorporated with turmeric oil for application on fresh-cut apples
by: Sharif Z.I.M.; Jai J.; Subuki I.; Zaki N.A.M.; Mustapha F.A.; Mohd Yusof N.
Published: (2019)

Growth and development of moringa (Moringa oleifera L.) stem cuttings as affected by diameter magnitude, growth media, and indole-3-butyric acid
by: Rufai S.; Hanafi M.M.; Rafii M.Y.; Mohidin H.; Omar S.R.S.
Published: (2016)

Structural behaviour of cold-formed cut-curved channel steel section under compression
by: Sani M.S.H.M.; Muftah F.; Tan C.S.; Tahir M.M.
Published: (2015)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
by: Azhar, et al.
Published: (2024)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
by: Azhar, et al.
Published: (2024)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
by: Azhar, et al.
Published: (2024)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
by: Azhar, et al.
Published: (2024)

Strengthening method and structural performance of cold-formed cut-curved steel under compression
by: Mohd Sani M.S.H.; Muftah F.; Siang Tan C.; Md Tahir M.
Published: (2016)

The Effects of Nitrogen-Purged Thermal Debinding and Post-sintering Parameters on Metal Injection Moulded Pulverised Aluminium Alloy Swarf Binded with 100 Vol% of Palm Stearin
by: Yussoff S.B.; Mohamad Nor N.H.; Husain H.; Saedon J.B.
Published: (2024)

Notice of Retraction: The development of librarian emotional intelligence assessment tool
by: Masrek M.N.; Sani M.K.J.A.
Published: (2012)

Optimization of cutting parameters to improve power consumption and material removal rate in high efficiency milling
by: Noor R.M.; Ramli M.I.; Zubair A.F.; Hemdi A.R.; Kataraki P.
Published: (2021)

Design of a superbike paddock stand using cad and cae tools
by: Rashid H.; Abdullah A.H.; Mohd Noh M.H.; Abdul Hamid A.H.; Zainal Abidin N.M.
Published: (2012)

Thermal oxidation studies on methyl grafted natural rubber polymer electrolytes with paraphenylene diamine additive
by: Aziz A.F.B.; Ali A.M.M.
Published: (2012)

Modeling and Simulation of Additively Manufactured Cylindrical Component Using Combined Thermomechanical and Inherent Strain Method with Nelder-Mead Optimization
by: Taufek T.; Manurung Y.H.P.; Adenan M.S.; Akma S.; Choo H.L.; Louhichi B.; Bednardz M.; Aziz I.
Published: (2023)

Feed-forward back-propagation (FFBP) algorithm for property prediction in friction stir spot welding of aluminium alloy
by: Armansyah; Chie H.H.; Saedon J.; Adenan S.
Published: (2020)

Temperature distribution in friction stir spot welding of aluminium alloy based on finite element analysis
by: Armansyah; Chie H.H.; Saedon J.; Adenan S.
Published: (2020)

The Influence of Forefoot Bending Stiffness of Futsal Shoes on Multiple V-Cut Run Performance
by: Ismail S.I.; Nunome H.; Tamura Y.
Published: (2021)

The Influence of Cutting Parameter under Sustainable Machining Approaches on Surface Roughness of AISI 4340
by: Ahmad A.A.; Ghani J.A.; Haron C.H.C.
Published: (2023)