Microstructural and physical properties of yttria stabilized zirconia (YSZ) prepared by ceramic injection moulding (CIM)

QR Code

Microstructural and physical properties of yttria stabilized zirconia (YSZ) prepared by ceramic injection moulding (CIM)

Ceramic injection moulding (CIM) is a near net shape process to produce smaller and intricate parts at a competitive cost. However, fine particle size (nano scale) used for such injection moulding process generally leads to agglomeration, higher binder content and critical dimensional shrinkage whic...

Full description

Bibliographic Details
Published in:	Journal of Physics: Conference Series
Main Author:	Zainudin M.; Ismail M.H.; Shaari N.S.; Manap M.F.A.; Yahaya M.
Format:	Conference paper
Language:	English
Published:	IOP Publishing Ltd 2021
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85119196043&doi=10.1088%2f1742-6596%2f2051%2f1%2f012049&partnerID=40&md5=82af23ecec61130c14e7078a6c86c01f

Similar Items

Enhanced Erbium-Zirconia-Yttria-Aluminum Co-Doped Fiber Amplifier
by: Paul M.C.; Dhar A.; Das S.; Pal M.; Bhadra S.K.; Markom A.M.; Rosli N.S.; Hamzah A.; Ahmad H.; Harun S.W.
Published: (2015)

Influence of waste rubber on the properties and microstructure of injection moulded M2 high speed steel
by: Wahab N.A.; Omar M.A.; Nordin N.A.; Sauti R.; Bahrin M.D.K.
Published: (2014)

Kenaf/polypropylene key chain product fabricated by injection moulding
by: Koay M.H.; Salleh Z.; Masdek N.R.N.M.; Budin S.; Ngu A.
Published: (2019)

Feedstock flow characterization and processing of porous niti by metal injection moulding (MIM)
by: Ismail M.H.; Nor N.H.M.; Davies H.A.; Todd I.
Published: (2015)

The Effect of Brand, Thickness, and Abutment Substrate on the Masking Ability of Monolithic Zirconia Ceramics
by: Kassim M.Z.; Mustafa N.W.N.A.; Ahmad R.; Baba N.Z.
Published: (2024)

Rheological characterizations of copper - palm stearin based binder system for metal injection moulding
by: Nordin N.A.; Kamal Bahrin M.D.; Wahab N.; Omar A.; Ismail M.H.
Published: (2016)

Effect of injection moulding parameters in reducing the shrinkage of polypropylene product using Taguchi analysis
by: Hyie K.M.; Budin S.; Wahab M.A.A.A.
Published: (2019)

Optimising sintering parameters on the characteristic of injection moulded 316L stainless steel utilising water soluble system
by: Omar N.F.; Wahab N.; Ahmad I.N.; Sulong N.
Published: (2019)

The potential of starch as an eco-friendly binder in injection moulding of 316L Stainless steel for medical devices applications
by: Wahab N.; Omar M.A.; Nordin N.A.; Sauti R.
Published: (2014)

Microstructural characterization and microhardness of leucite glass-ceramics synthesized from sarawak sand reserves
by: Qamaruzzaman J.; Ismail M.H.; Muchtar A.; Selamat M.; Ahmad R.
Published: (2020)

Thermal conductivity of copper matrix composites reinforced with multi-wall carbon nanotubes
by: Shaari N.S.; Ismail M.H.; Jumahat A.; Zainudin M.; Manap M.F.A.; Shaari N.
Published: (2021)

The Effects of Nitrogen-Purged Thermal Debinding and Post-sintering Parameters on Metal Injection Moulded Pulverised Aluminium Alloy Swarf Binded with 100 Vol% of Palm Stearin
by: Yussoff S.B.; Mohamad Nor N.H.; Husain H.; Saedon J.B.
Published: (2024)

Effect of Temperature on Zirconia Powder Synthesized from Amang Zirconium Oxychloride Precursor
by: Amin N.A.M.; Subuki I.; Sapiee N.H.; Shaari N.Z.K.
Published: (2024)

Microstructure and electrochemical properties of modified LaSrCoFeO3 cathode thin film on proton conductor ceramics
by: Dila Safian S.; Izzati Abd Malek N.; Osman N.
Published: (2022)

Fabrication and application of zirconia-erbium doped fibers
by: Ahmad H.; Thambiratnam K.; Paul M.C.; Zulkifli A.Z.; Ghani Z.A.; Harun S.W.
Published: (2012)

Rheological behavior of Zirconia Added alumina mixture
by: Aziz S.N.A.; Saidi W.S.S.W.; Bakar M.A.A.; Ismail M.H.
Published: (2018)

Effect of surfactant on the thermal behavior of cerate-zirconate ceramic powder prepared by modified sol-gel method
by: Mazlan N.A.; Osman N.; Yaakob M.H.; Md Jani A.M.
Published: (2015)

The effects of nodularity distribution on vertical configuration mould for automotive ductile iron casting
by: Saman A.M.; Abdullah A.H.; Nor M.A.M.; Hasbullah I.
Published: (2010)

Effect of Temperature on Zirconia Powder Synthesized from Amang Zirconium Oxychloride Precursor
by: Norsham N.F.F.; Subuki I.
Published: (2024)

Effect of several calcination temperature on different concentration zinc substituted calcium phosphate ceramics
by: Wahid M.F.A.; Hyie K.M.; Mardziah C.M.; Nik Roselina N.R.
Published: (2015)

Mechanical Properties of Epoxy-UHMWPE Variant for Hip Implant Proposal: Preliminary Study on Numerical and Experimental
by: Manap M.F.A.; Shuib S.; Romli A.Z.; Ahmad F.N.; Md Noh N.S.S.; Zainudin M.
Published: (2024)

Preparation of Pickering Flaxseed Oil-in-Water Emulsion Stabilized by Chitosan-Myristic Acid Nanogels and Investigation of Its Oxidative Stability in Presence of Clove Essential Oil as Antioxidant
by: Hosseini E.; Rajaei A.; Tabatabaei M.; Mohsenifar A.; Jahanbin K.
Published: (2020)

Breaking the linear mould: exploring the non-linear relationship between board independence and investment efficiency
by: Kamarudin K.A.; Hassan N.H.; Wan Ismail W.A.
Published: (2024)

Q-switching Zirconia-Erbium-doped Pulsed Fiber Laser with MWCNTs-PEO as Saturable Absorber
by: Markom A.M.; Ahmad M.T.; Haris H.; Muhammad A.R.; Yusoff Z.M.; Burham N.; Paul M.C.; Dhar A.; Das S.; Pal M.; Bhadra S.K.; Harun S.W.
Published: (2019)

Crestal bone loss and periimplant inflammatory parameters around zirconia implants: A systematic review
by: Vohra F.; Al-Kheraif A.A.; Ab Ghani S.M.; Abu Hassan M.I.; Alnassar T.; Javed F.
Published: (2015)

Polymeric/ceramic membranes for water reuse
by: Alias N.H.; Aziz M.H.A.; Adam M.R.; Aizudin M.; Ang E.H.
Published: (2023)

Fluctuation induces conductivity and microstructural studies in Y-123: Effect of CaO inclusion
by: Yap S.H.; Kechik M.M.A.; Shariff K.K.M.; Baqiah H.; Chen S.K.; Lim K.P.; Shabdin M.K.; Zaid M.H.M.; Yaakob Y.; Karim M.K.A.; Humaidi S.; Shaari A.H.; Miryala M.
Published: (2024)

Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen
by: Khalid, et al.
Published: (2024)

Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen
by: Khalid A.H.; Muhamad Said M.F.; Veza I.; Abas M.A.; Roslan M.F.; Abubakar S.; Jalal M.R.
Published: (2024)

The influence of alkanolamine in the formation of Pt nano- and microstructures
by: Johan Ooi M.D.; Abdul Aziz A.; Mahmood A.; Bakhari N.A.
Published: (2020)

Preparation of conductive cellulose paper through electrochemical exfoliation of graphite: The role of anionic surfactant ionic liquids as exfoliating and stabilizing agents
by: Mohamed A.; Ardyani T.; Bakar S.A.; Sagisaka M.; Umetsu Y.; Hussin M.R.M.; Ahmad M.K.; Mamat M.H.; King S.; Czajka A.; Hill C.; Eastoe J.
Published: (2018)

Thermal analysis and microstructural study of porous β-TiNb incorporated with Tih 2 powder via low-cost processing route
by: Hosnie S.M.; Yahaya M.; Haris N.A.; Ismail M.H.
Published: (2018)

Microstructure of nanosilica modified binder by atomic force microscopy
by: Samsudin M.S.; Arshad A.K.; Ahmad J.; Masri K.A.
Published: (2016)

Introduction to photonics: Principles and the most recent applications of microstructures
by: Amiri I.S.; Azzuhri S.R.B.; Jalil M.A.; Hairi H.M.; Ali J.; Bunruangses M.; Yupapin P.
Published: (2018)

Effect of welding preheats on metallurgical analysis and microstructural development
by: Mazni M.; Bin Ismail M.H.; Bin Pahroraji H.F.; Malik N.A.; Mohd Hamami M.G.B.; Sukarman F.; Sulong N.
Published: (2020)

The study of chromium oxide loading on platinum chromium oxide zirconia catalyst for n-dodecane and 1,4-diisopropylbenzene hydrocracking
by: Annuar N.H.R.; Teh L.P.; Setiabudi H.D.; Aziz M.A.A.; Salam N.M.; Jalil A.A.
Published: (2020)

Study of the synthesis of zirconia powder from zircon sand obtained from zircon minerals malaysia by caustic fusion method
by: Subuki I.; Mohsin M.F.; Ismail M.H.; Fadzil F.S.M.
Published: (2020)

The Sustainability of Wabi-Sabi Aesthetics in Ceramic Product Design
by: Du S.; Ayob S.B.; Zhang Y.; Zhang K.; Zheng T.
Published: (2024)

Microstructure and Superconducting Properties of Bi-2223 Synthesized via Co-Precipitation Method: Effects of Graphene Nanoparticle Addition
by: Abdullah S.N.; Kechik M.M.A.; Kamarudin A.N.; Talib Z.A.; Baqiah H.; Kien C.S.; Pah L.K.; Abdul Karim M.K.; Shabdin M.K.; Shaari A.H.; Hashim A.; Suhaimi N.E.; Miryala M.
Published: (2023)

Effect of preparation conditions of activated carbon prepared from corncob by CO2 activation for removal of Cu (II) from aqueous solution
by: Latiff M.F.P.M.; Abustan I.; Ahmad M.A.; Yahaya N.K.E.M.; Khalid A.M.
Published: (2016)