Experimental Study Using Recycled Waste Tyre as Sustainable Clay Soil Stabilisation

QR Code

Experimental Study Using Recycled Waste Tyre as Sustainable Clay Soil Stabilisation

Clay presents construction challenges to geotechnical engineers as it shows high compressibility, low shear strength and high level of volumetric changes behaviour. Therefore, the properties of clay need to be improved before it can be used in any type of construction. Clay soil stabilisation using...

Full description

Bibliographic Details
Published in:	International Journal of Integrated Engineering
Main Author:	Zain N.H.M.; Salim N.A.M.; Bahri I.S.S.; Yusof Z.M.
Format:	Article
Language:	English
Published:	Penerbit UTHM 2022
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85138139448&doi=10.30880%2fijie.2022.14.05.014&partnerID=40&md5=d1cabf3fbe0f39c4fdd2eeff0b17cda9

Similar Items

Compressive Strength of Peat Soil Treated with Waste Tyre Granules
by: Md Zain N.H.; Zulastry M.I.
Published: (2020)

Ceramic Dust Based Binder for Sustainable Stabilisation of Low Flood-Plain Soil
by: Rahmat M.N.; Ibrahim S.; Ismail N.
Published: (2019)

A Study on Crushed Coconut Shells as Stabiliser to Soil
by: Kamarudin F.; Jaya A.A.M.; Roslee M.H.M.; Ahmad A.; Abdullah M.S.
Published: (2023)

Review of Subgrade Soil Stabilised with Natural and Synthetic Fibres
by: Nathen J.M.; Arshad A.K.; Rais N.M.; Shaffie E.; Ismail F.; Kamaluddin N.A.; Malek A.Z.A.
Published: (2024)

IMPROVEMENT OF PROBLEMATIC SOIL USING CRUMB RUBBER TYRE
by: Saparudin N.A.; Kasim N.; Taib K.A.; Azahar W.N.A.W.; Kasim N.A.; Ali M.
Published: (2022)

Soil water characteristic curve (SWCC) of lime-laterite stabilised soil as a lining-system design
by: Binti Zakaria N.S.S.; Binti Jusoh S.N.; Binti Mohd Yunus N.Z.; Hezmi M.A.B.; Razali R.; Binti Ahmad Rizal N.H.
Published: (2024)

Prediction model of hydraulic conductivity for sedimentary residual soil mixed bentonite as compacted clay liner
by: Khalid N.; Mukri M.; Zain N.H.M.; Zainuddin A.N.; Kamarudin F.
Published: (2024)

FACEMASK COMFORT ENHANCEMENT WITH GRAPHENE OXIDE FROM RECOVERED CARBON WASTE TYRES
by: Ungku Mohd Aziz U.N.A.; Nor Affandi N.D.; Harun A.M.; Abdul Rahman M.A.; Indrie L.; Bonnia N.N.
Published: (2024)

Facemask comfort enhancement with graphene oxide from recovered carbon waste tyres
by: Aziz, et al.
Published: (2024)

Plasticity and strength Behaviour of marine clay stabilized with waste steel dust for soil improvement works
by: Abdullah N.H.H.; A. Talibsyahirah; Ahmad A.; Ismail N.
Published: (2021)

Preparation of castor-based polyurethane composites filled with waste carbon tyres (WCT) as grouting material
by: Hussain N.I.A.M.; Bonnia N.N.; Hirzin R.S.F.N.; Ali E.S.; Ratim S.
Published: (2020)

Enhancing the environmental sustainability of water treatment sludge (WTS) disposal through blended binder solidification/stabilisation
by: Fauzi N.M.; Arshad M.F.; Jaya R.P.; Mukri M.; Khiyon N.H.
Published: (2024)

Uplift and Settlement Prediction Model of Marine Clay Soil e Integrated with Polyurethane Foam
by: Lat D.C.; Jais I.B.M.; Ali N.; Baharom B.; Mohd Yunus N.Z.; Mat Yusof D.A.
Published: (2019)

Hardening soil model parameters for sands and clays from laboratory testing
by: Abdullah M.H.; Rashid A.S.A.; Said K.M.; Shien N.K.; Hasbollah D.Z.A.
Published: (2021)

Prediction of soil settlement on soft clay soil using normalized rotational multiple yield surface framework (Nrmysf)
by: Hamid H.A.; Noor M.J.M.; Alias R.; Alias A.
Published: (2023)

Recycling waste cooking oil into soap: Knowledge transfer through community service learning
by: Azme S.N.K.; Yusoff N.S.I.M.; Chin L.Y.; Mohd Y.; Hamid R.D.; Jalil M.N.; Zaki H.M.; Saleh S.H.; Ahmat N.; Manan M.A.F.A.; Yury N.; Hum N.N.F.; Latif F.A.; Zain Z.M.
Published: (2023)

Physical and mechanical properties of fired clay bricks substituted with agricultural waste
by: Wahab R.A.A.; Zakri F.A.A.; Sokri N.K.N.M.; Norizam N.A.F.; Karya A.Q.; Zaid M.H.M.; Mohamad M.; Mazlan M.
Published: (2021)

Towards Sustainable City: A Covering Model for Recycling Facility Location-allocation in Nilai, Malaysia
by: Zaharudin Z.A.; Shuib A.; Hadianti R.; Rodzi Z.M.
Published: (2023)

Experimental testing and ultrasonic pulse transmission technique of granite for sustainable rock testing approach at Rawang, Selangor
by: Hamzah N.; Yusof N.A.M.; Abdul Rahman A.S.; Harun M.A.
Published: (2020)

Utilization of Sodium Hydroxide (Naoh) to Treat Used Tyres as Sand Partial Replacement in Engineered Cementitious Composites
by: Abdul Aziz A.; Rosli M.I.F.; Kay Dora A.G.; Zakaria N.; Jafri N.A.
Published: (2022)

Particleboard from agricultural biomass and recycled wood waste: a review
by: Lee S.H.; Lum W.C.; Boon J.G.; Kristak L.; Antov P.; Pedzik M.; Rogozinski T.; Taghiyari H.R.; Lubis M.A.R.; Fatriasari W.; Yadav S.M.; Chotikhun A.; Pizzi A.
Published: (2022)

Deposition of nanostructures derived from electrostatically stabilised TiO2 aqueous suspension onto a biocomposite
by: Naim M.N.; Jaafar A.R.; Abu Bakar N.F.; Baharuddin A.S.; Kadir Basha R.; Lenggoro I.W.
Published: (2015)

Waste Segregation through Recycle and Composting Activities in Urban and Suburban Areas
by: Kasmuri N.; Razak S.N.A.; Yaacob Z.; Miskon M.F.; Ramli N.H.; Zaini N.
Published: (2023)

Physical and Mechanical Properties of Fired Industrial Waste-Clay Brick from Sugarcane Bagasse
by: Osman, et al.
Published: (2024)

The sacrificial role of graphene oxide in stabilising a Fenton-like catalyst GO-Fe3O4
by: Zubir N.A.; Yacou C.; Motuzas J.; Zhang X.; Zhao X.S.; Diniz Da Costa J.C.
Published: (2015)

Uncovering Obstacles to Household Waste Recycling in Seremban, Malaysia through Decision-Making Trial and Evaluation Laboratory (DEMATEL) Analysis
by: Rodzi Z.M.; Hazri A.N.; Mohd Azri N.A.S.; Sharul Rhmdan N.D.F.; Zaharudin Z.A.; Uttunggadewa S.
Published: (2023)

Opportunities and challenges of recycling and reusing lithium-ion batteries for sustainable mobility
by: Harun I.; Bahrudin F.I.; Daud N.; Zin N.F.S.B.; Yunus N.F.M.; Mahat M.M.; Shaffee S.N.A.
Published: (2023)

Physical properties of low energy consumption fired industrial waste-clay bricks from cockle shells and soda lime silica glass
by: Wahab R.A.A.; Mohammad M.; Mazlan M.; Razali M.A.M.; Rusni N.A.M.; Sharisun Asma W.A.N.W.; Ashari F.; Zaid M.H.M.
Published: (2021)

Encapsulation of multi-enzymes on waste clay material: Preparation, characterization and application for tapioca starch hydrolysis
by: Edama N.A.; Sulaiman A.; Hamid K.H.K.; Rahim S.N.A.; Baharuddin A.S.; Mokhtar M.N.
Published: (2014)

Waste to Best: Chemical Recycling of Polyethylene Terephthalate (PET) for Generation of Useful Molecules
by: Radadiya R.; Shahabuddin S.; Gaur R.
Published: (2022)

A multi-period model for reorganising urban household waste recycling networks
by: Zaharudin Z.A.; Brint A.; Genovese A.
Published: (2022)

Experimental study of copper contamination in mechanical properties of residual soil under different concentration
by: Anyap A.A.; Osman M.H.; Ismail B.N.; Albar A.
Published: (2024)

Development of inherent safety assessment index for e-waste recycling process: flammability parameter
by: Syaza Izyanni A.; Engku Syifa Hayani E.S.; Mardhati Z.A.; Muhammad Firdaus H.
Published: (2023)

Food waste reduction strategies in composting and recycling centers based on material flow analysis
by: Zahra S.C.; Anggrainy A.D.; Mohd-Zaki Z.; Bagastyo A.Y.
Published: (2024)

A spatial interaction model for the representation of user access to household waste recycling centres
by: Zaharudin Z.A.; Brint A.; Genovese A.; Piccolo C.
Published: (2021)

Durability of Slag Based Geopolymer Stabilized Clay with High Moisture Condition
by: Ahmad M.M.; Zaki M.F.M.; Ghazaly Z.M.; Bawadi N.F.; Nujid M.M.; Muhamad K.; Hong T.H.H.
Published: (2024)

Characterization of waste clay from palm oil mill effluent and enzyme immobilization study for cassava saccharification process
by: Edama N.A.; Sulaiman A.; Abd-Rahim S.N.; Ku Hamid K.H.; Busu Z.
Published: (2014)

An Insight into Domestic Solid Waste Recycling Facilities and Urban Households' Behaviour in Shah Alam, Malaysia
by: Abdullah Y.A.; Rauf N.R.A.A.; Yakob H.; Othman R.N.R.; Marzukhi M.A.; Leh O.L.H.
Published: (2022)

Physical and mechanical properties of fired industrial waste-clay bricks from clam shells and soda lime silica glass
by: Mohammad M.; Abdul Wahab R.A.; Mazlan M.; Nisa Syuhaidah Mohamad Fazil N.; Suraya Hanim Ibrahim N.; Najiha Muhamad Nizam U.; Humaidi Abu Hanifah A.; Hafiz Mohd Zaid M.
Published: (2022)

A preliminary model for recycling facility location-allocation problem
by: Zaharudin Z.A.; Shuib A.; Hadianti R.; Rodzi Z.M.
Published: (2024)