Simulation And Analysis Of Calorific Value For Biomass Solid Waste As A Potential Solid Fuel Source For Power Generation

QR Code

Simulation And Analysis Of Calorific Value For Biomass Solid Waste As A Potential Solid Fuel Source For Power Generation

Biomass solid waste (BSW) generation in Malaysia is rapidly increasing as a result of nation’s industrialization, urbanization, and population growth. Thermochemical conversion of BSW to produce energy is not straightforward due to fuel’s high moisture content, low heating value, and poor grindabili...

Full description

Bibliographic Details
Published in:	Journal of Applied Science and Engineering
Main Author:	Kamaruddin N.A.B.; Ghani W.A.W.A.K.; Hamid M.R.A.; Alias A.B.; Shamsudin A.H.
Format:	Article
Language:	English
Published:	Tamkang University 2023
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85139454579&doi=10.6180%2fjase.202302_26%282%29.0002&partnerID=40&md5=b4e3ecefd30e00bafd52ca45ecfdbbe6

Similar Items

Microwave-Assisted Pyrolysis of Oil Palm Biomass: Multi-Optimisation of Solid Char Yield and Its Calorific Value Using Response Surface Methodology
by: Idris S.S.; Rahman N.A.; Ismail K.; Mohammed Yunus M.F.; Mohd Hakimi N.I.N.
Published: (2022)

Recurrent neural networks optimization of biomass-based solid oxide fuel cells combined with the hydrogen fuel electrolyzer and reverse osmosis water desalination
by: Hai T.; Ashraf Ali M.; Alizadeh A.; Zhou J.; Dhahad H.A.; Kumar Singh P.; Fahad Almojil S.; Ibrahim Almohana A.; Fahmi Alali A.; Shamseldin M.
Published: (2023)

Investigation of Dynamic Viscosity and Calorific Value of Algae Biodiesel Blend with n-Butanol Additive
by: Noordin N.H.; Sharudin H.; Yusof A.A.M.; Kasim H.A.; Nizam N.E.M.
Published: (2023)

Numerical simulation of unprotected solid steel beams at elevated temperatures
by: Ahmad Zakwan F.A.; Krishnamoorthy R.R.; Ibrahim A.; Mohd Ismail A.M.
Published: (2017)

Challenges in using perovskite-based anode materials for solid oxide fuel cells with various fuels: a review
by: Zainon A.N.; Somalu M.R.; Kamarul Bahrain A.M.; Muchtar A.; Baharuddin N.A.; S.A M.A.; Osman N.; Abdul Samat A.; Azad A.K.; Brandon N.P.
Published: (2023)

Time series forecasting of solid waste generation in selected states in Malaysia
by: Nasir N.; Shariff S.S.R.; Januri S.S.; Zulkipli F.; Md Yasin Z.A.M.
Published: (2023)

Sol-gel based copper metallic layer as external anode for microtubular solid oxide fuel cell
by: Shabri H.A.; Rudin S.N.F.M.; Othman M.H.D.; Jamil S.M.; Kamal S.N.E.A.M.; Abu Bakar S.; Osman N.; Jaafar J.; Rahman M.A.; Ismail A.F.
Published: (2022)

Analysis of Electric Signals from Micro-Solid Oxide Fuel Cell Sensors Detecting Methane Biogas
by: Ninwijit T.; Palamnit A.; Luengchavanon M.; Marthosa S.; Osman N.; Chowdhury S.; Niyomwas S.
Published: (2022)

On the thermodynamics of solid solutions of polymer and salt
by: Chan C.H.; Kammer H.-W.; Sim L.H.; Nasir N.H.A.; Winie T.
Published: (2012)

Anode fabrication for solid oxide fuel cells: Electroless and electrodeposition of nickel and silver into doped ceria scaffolds
by: Jamil Z.; Ruiz-Trejo E.; Boldrin P.; Brandon N.P.
Published: (2016)

Co-extruded triple-layer micro-tubular solid oxide fuel cell: The influence of cathode extrusion rate on the fuel cell properties and performance
by: Ab Rahman M.; Othman M.H.D.; Fansuri H.; Harun Z.; Abdul Rahman M.; Jaafar J.; Ismail A.F.; Osman N.; Rajamohan N.
Published: (2024)

Physical characterization of LSCF-NiO as cathode material for intermediate temperature solid oxide fuel cell (IT-SOFCs)
by: Rosli A.Z.; Somalu M.R.; Osman N.; Hamid N.A.
Published: (2020)

Optimization analysis of solid oxide fuel cells with ceria-based single cells using computational fluid dynamics
by: Huai T.K.; Azami M.S.M.; Rahman H.A.; Rahman N.F.A.; Tukimon M.F.; Jaidi Z.H.; Yusop U.A.
Published: (2024)

Low nickel, ceria zirconia-based micro-tubular solid oxide fuel cell: A study of composition and oxidation using hydrogen and methane fuel
by: Shabri H.A.; Rudin S.N.F.M.; Deraman S.; Rahman M.A.; Othman M.H.D.; Jamil S.M.; Kurniawan T.A.; Li T.; Bakar S.A.; Osman N.; Jaafar J.; Rahman M.A.; Ismail A.F.
Published: (2021)

Stable Efficient Solid-State Supercapacitors and Dye-Sensitized Solar Cells Using Ionic Liquid-Doped Solid Biopolymer Electrolyte
by: Konwar S.; Siyahjani Gultekin S.; Gultekin B.; Kumar S.; Punetha V.D.; Yahya M.Z.A.B.; Diantoro M.; Latif F.A.; Mohd Noor I.S.; Singh P.K.
Published: (2024)

Forecasting Municipal Solid Waste (MSW) generation in Klang, Selangor using Artificial Neural Network (ANN)
by: Mohamad N.A.J.; Yatim S.R.M.; Abdullah S.; Azmin M.T.; Alwi N.
Published: (2022)

Characterization study of oily sludge produced from north refineries company baiji to determine the suitability for conversion into solid fuel
by: Abdulqader M.A.; Syed-Hassan S.S.A.; Jawad A.H.; Habeeb O.A.
Published: (2021)

Impact of Movement Control Order on Carbon Footprint Generation from Solid Waste in Higher Learning Institutions
by: Hussein N.; Zakaria M.D.; Hassan C.H.C.; Jan S.L.M.; Zaidi N.S.
Published: (2024)

An analysis on the effect of coronavirus (COVID-19) pandemic movement control order (MCOS) on the solid waste generation in Peninsular Malaysia
by: Brohan M.A.; Dom N.C.; Ishak A.R.; Abdullah S.; Salim H.; Ismail S.N.S.; Precha N.
Published: (2021)

Sodium ion conducting NaI-Na3PO4 solid electrolyte with PLLTMEDA as an additive for solid state batteries
by: Ahmad A.H.; Hassan N.
Published: (2017)

Low molecular weight peptides generated from palm kernel cake via solid state lacto-fermentation extend the shelf life of bread
by: Mohamad Asri N.; Muhialdin B.J.; Zarei M.; Saari N.
Published: (2020)

Influence of sintering temperature on the properties of the screen-printed anode of the LSMO4 Ruddlesden‒Popper perovskite for intermediate-temperature solid oxide fuel cells
by: Zainon A.N.; Somalu M.R.; Bahrain A.M.K.; Muchtar A.; Baharuddin N.A.; S.A M.A.; Abdul Samat A.; Osman N.; Azad A.K.
Published: (2023)

Stable Efficient Solid-State Supercapacitors and Dye-Sensitized Solar Cells Using Ionic Liquid-Doped Solid Biopolymer Electrolyte
by: Konwar, et al.
Published: (2024)

The effect of the ultrasound transmission across solid-nanocomposite materials
by: Latif N.A.; Salmiah K.; Ahmad M.A.; Bakar M.A.A.
Published: (2019)

FORECASTING SOLID WASTE GENERATION IN NEGERI SEMBILAN AND MELAKA; [Peramalan Penjanaan Sisa Pepejal di Negeri Sembilan dan Melaka]
by: Nasir N.; Zulkipli F.; Faizal N.F.S.M.; Ghadafy N.M.; Azman N.H.
Published: (2021)

Convolutional neural network for solid waste segregation and management
by: Ong T.C.; Yong M.G.O.; Manap N.A.; Abdullah F.; Ong T.S.
Published: (2020)

Mathematical modeling and experiment verification for the Solid oxide Fuel Cell Mn1.5Co1.5O4 interconnect coating
by: Kang Huai T.; Lowrance Y.; Farhana Abd Rahman N.; Asyikin Yusop U.; Abd Rahman H.; Jaidi Z.; Faizal Tukimon M.; Saifulddin Mohd Azami M.
Published: (2024)

Mathematical modeling and experiment verification for the Solid oxide Fuel Cell Mn1.5Co1.5O4 interconnect coating
by: Huai, et al.
Published: (2024)

An innovative biomass-driven multi-generation system equipped with PEM fuel cells/VCl cycle: Throughout assessment and optimal design via particle swarm algorithm
by: Hai T.; El-Shafay A.S.; Al-Obaidi R.; Singh Chauhan B.; Fahad Almojil S.; Almohana A.I.; Alali A.F.
Published: (2024)

Enhancement and bioavailability of phenolic content in Kappaphycus alvarezii through solid substrate fermentation
by: Nor N.M.; Haiyee Z.A.; Wan Abdul Razak W.R.; Muhammad S.K.S.
Published: (2019)

Presence of Residual Oil in Relation to Solid Particle Distribution in Palm Oil Mill Effluent
by: Sharifudin W.S.S.A.W.; Sulaiman A.; Mokhtar N.; Baharuddin A.S.; Tabatabaei M.; Busu Z.; Subbian K.
Published: (2015)

Effects of solid-state fermentation of seaweed (Caulerpa racemosa) on antioxidant assay and flavour profile
by: Astuti P.D.; Zaibunnisa A.H.; Norakma M.N.; Adibah B.A.
Published: (2023)

Solid-state transformer (S2T) of single phase matrix converter
by: Zainuddin Z.; Baharom R.; Yassin I.M.; Muhammad K.S.
Published: (2018)

Polypyrrole-magnetite dispersive micro-solid-phase extraction combined with ultraviolet-visible spectrophotometry for the determination of rhodamine 6G and crystal violet in textile wastewater
by: Kamaruddin A.F.; Sanagi M.M.; Wan Ibrahim W.A.; Md. Shukri D.S.; Abdul Keyon A.S.
Published: (2017)

Solid Phase Extraction Method for the Determination of Atrazine and Cyanazine in Water Samples
by: Abidin N.A.Z.; Abdullah A.; Kassim N.S.A.; Pungot N.H.
Published: (2021)

A Review of Solid-State Proton–Polymer Batteries: Materials and Characterizations
by: Rani M.S.A.; Norrrahim M.N.F.; Knight V.F.; Nurazzi N.M.; Abdan K.; Lee S.H.
Published: (2023)

Recent developments in synthesis and characterisation of graphene oxide modified with deep eutectic solvents for dispersive and magnetic solid-phase extractions
by: Emmanuel Ibukun A.; Yahaya N.; Husaini Mohamed A.; Semail N.-F.; Abd Hamid M.A.; Nadhirah Mohamad Zain N.; Anuar Kamaruddin M.; Hong Loh S.; Kamaruzaman S.
Published: (2024)

Enhancement of phenolics extraction from red algae (Kappaphycus spp.) using solid-state fermentation
by: Norakma M.N.; Zaibunnisa A.H.; Wan Razarinah W.A.R.; Zarei M.; Sobah A.; Hamid N.; Astuti P.D.
Published: (2023)

Hydrothermal Carbonization of Sewage Sludge into Solid Biofuel: Influences of Process Conditions on the Energetic Properties of Hydrochar
by: Roslan S.Z.; Zainudin S.F.; Mohd Aris A.; Chin K.B.; Musa M.; Mohamad Daud A.R.; Syed Hassan S.S.A.
Published: (2023)

Review of poly (methyl methacrylate) based polymer electrolytes in solid-state supercapacitors
by: Latif F.A.; Zailani N.A.M.; Al Shukaili Z.S.M.; Zamri S.F.M.; Kasim N.A.M.; Rani M.S.A.; Norrrahim M.N.F.
Published: (2022)