A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant

QRコード

A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant

Medical implants are normally used in clinical practice to treat most orthopaedics situations involving bone fractures, deformities, dislocation, and lengthening. It should be noted that specific measures regarding biomechanical and biomaterial characteristics are required for a successful post-surg...

書誌詳細
出版年:	Malaysian Journal of Medicine and Health Sciences
第一著者:	Al-Tam B.Y.; Ramlee M.H.; Wahab A.A.; Seng G.H.; Abdullah A.H.
フォーマット:	Review
言語:	English
出版事項:	Universiti Putra Malaysia Press 2023
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85147498693&doi=10.47836%2fmjmhs.19.1.41&partnerID=40&md5=6f4193aa0f639965a152c5f30f0d7dfa

類似資料

Determining hyperelastic parameters of human skin using 2D finite element modelling and simulation
著者:: 2-s2.0-84867919926
出版事項: (2012)

Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model
著者:: 2-s2.0-85159289861
出版事項: (2023)

Crash Investigation on Frontal Vehicle Chassis Frame using Finite Element Simulation
著者:: 2-s2.0-85141464799
出版事項: (2022)

Which is the best method of sterilization for recycled bone autograft in limb salvage surgery: A radiological, biomechanical and histopathological study in rabbit
著者:: Yasin N.F.; Singh V.A.; Saad M.; Omar E.
出版事項: (2015)

TOPOLOGY OPTIMIZATION AND MECHANICAL PROPERTIES STUDIES ON TOTAL KNEE REPLACEMENT (TKR) USING FINITE ELEMENT SIMULATION METHOD
著者:: Manap M.F.A.; Zainuddin P.N.B.; Ismail N.F.; Zubair A.F.; Halidi S.N.A.; Ismail H.
出版事項: (2023)

Current trend of lattice structures designed and analysis for porous hip implants: A short review
著者:: Abdullah N.N.A.A.; Abdullah A.H.; Ramlee M.H.
出版事項: (2022)

Natural Frequencies Prediction of Hybrid Composite Laminate based on Finite Element Simulation and Artificial Neural Network
著者:: 2-s2.0-85219506859
出版事項: (2024)

A review on behavior, material properties and finite element simulation of concrete tunnel linings under fire
著者:: 2-s2.0-85129768015
出版事項: (2022)

Biomechanical Evaluation of Three-Dimensional Printed Leg Orthosis for Ankle Fixation: Finite Element and Thermal Analysis
著者:: Mohd Salaha Z.F.; Jauhari Efendie S.N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版事項: (2024)

Performance Comparison between Polyester and Denim Textile Antenna on Non-Identical Human Upper Arm Sizes for 5G mid-band
著者:: Noor S.K.; Ramli N.; Rahman N.H.A.; Najib Mohd Yasin M.
出版事項: (2021)

Investigation of the effect of Berkovich and Cube Corner indentations on the mechanical behavior of fused silica using molecular dynamics and finite element simulation
著者:: 2-s2.0-85121742138
出版事項: (2022)

Review on the mechanical properties and biocompatibility of titanium implant: The role of niobium alloying element
著者:: 2-s2.0-85108859543
出版事項: (2021)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
著者:: Hanipah S.H.; C. Hassan N.F.N.; Talib A.T.; P Mohammed M.A.; Wakisaka M.; Abdullah Z.
出版事項: (2025)

Effect of Implant Positioning in Cemented Hip Arthroplasty
著者:: Aznan Z.A.; Azahan N.M.K.; Marwan S.H.; Taufiqurrakhman M.; Pandit H.; Khan T.; Abdullah A.H.
出版事項: (2025)

Finite element model updating on structural components of simplified model of aircraft pylon
著者:: Bahari A.R.; Yunus M.A.; Rani M.N.A.; Shah M.A.S.A.; Mirza W.I.I.W.I.
出版事項: (2022)

Reliability, agreement, and validity of digital weighing scale with MatScan in limb load measurement
著者:: Kumar S.N.S.; Omar B.; Htwe O.; Joseph L.H.; Krishnan J.; Esfehani A.J.; Min L.L.
出版事項: (2014)

Upper a-Graphical Topological Spaces with the COVID-19 Form and Its Diffusion
著者:: Damag, 等
出版事項: (2025)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
著者:: Hanipah, 等
出版事項: (2025)

Finite element-based fatigue life prediction of a load-carrying cruciform joint
著者:: 2-s2.0-84938634562
出版事項: (2015)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
著者:: 2-s2.0-85170094598
出版事項: (2023)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
著者:: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
出版事項: (2024)

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study
著者:: 2-s2.0-85148865825
出版事項: (2023)

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure
著者:: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Nazeri M.N.; Shuib S.
出版事項: (2024)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
著者:: 2-s2.0-85132112562
出版事項: (2022)

Optimization of Spot Weld Joining Parameters for Dissimilar Plate Materials through Finite Element Model Updating and Response Surface Methodology
著者:: 2-s2.0-85213279061
出版事項: (2024)

Operational modal analysis and finite element model updating of ultra-high-performance concrete bridge based on ambient vibration test
著者:: 2-s2.0-85129912488
出版事項: (2022)

Effect of Implant Positioning in Cemented Hip Arthroplasty
著者:: 2-s2.0-85215693614
出版事項: (2025)

Characterizations of fish bone-based hydroxyapatite: Effect of different calcination temperatures
著者:: Aziz H.A.; Mardziah C.M.; Natasha A.N.; Alexander C.H.C.
出版事項: (2024)

Are medical students confident in taking a sexual history? An assessment on attitude and skills from an upper middle income country
著者:: 2-s2.0-84931078936
出版事項: (2015)

COMPARISON BETWEEN JOHNSON COOK’S PLASTICITY WITH DAMAGE MODEL AND ISOTROPIC HARDENING PLASTICITY WITH DUCTILE DAMAGE MODEL ON ALUMINIUM ALLOY SHEET 2024 T3 TENSILE TEST IN CORRELATING THE FINITE ELEMENT METHOD (FEM) TO THE EXPERIMENT TEST RESULT
著者:: Gunsalam H.; Abdullah A.S.; Awi M.; Aziz M.R.; Kamarudin K.-A.
出版事項: (2023)

Investigation the mechanical properties of a novel multicomponent scaffold coated with a new bio-nanocomposite for bone tissue engineering: Fabrication, simulation and characterization
著者:: 2-s2.0-85119330392
出版事項: (2021)

Recent advancements in polymer matrix nanocomposites for bone tissue engineering applications
著者:: Sagadevan S.; Schirhagl R.; Rahman M.Z.; Bin Ismail M.F.; Lett J.A.; Fatimah I.; Mohd Kaus N.H.; Oh W.-C.
出版事項: (2023)

Exploring the Potential of Moringa oleifera in Managing Bone Loss: Insights from Preclinical Studies
著者:: Hairi H.A.; Jusoh R.R.; Sadikan M.Z.; Hasan W.N.W.; Shuid A.N.
出版事項: (2025)

In vitro dissolution testing models of ocular implants for posterior segment drug delivery
著者:: Adrianto M.F.; Annuryanti F.; Wilson C.G.; Sheshala R.; Thakur R.R.S.
出版事項: (2022)

In vitro dissolution testing models of ocular implants for posterior segment drug delivery
著者:: 2-s2.0-85112306162
出版事項: (2022)

The role of shear viscosity as a biomarker for improving chronic kidney disease detection using shear wave elastography: A computational study using a validated finite element model
著者:: 2-s2.0-85160299232
出版事項: (2023)

Comparing effectiveness of high-fidelity human patient simulation vs case-based learning in pharmacy education
著者:: 2-s2.0-84908299218
出版事項: (2014)

Surface Characterization of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System
著者:: Saedon, 等
出版事項: (2024)

The Potential of Radiolabeled Bisphosphonates in SPECT and PET for Bone Imaging
著者:: Ashhar, 等
出版事項: (2024)

A Review of Animal Models for Studying Bone Health in Type-2 Diabetes Mellitus (T2DM) and Obesity
著者:: Norazman S.I.; Mohd Zaffarin A.S.; Shuid A.N.; Hassan H.; Soleiman I.N.; Kuan W.S.; Alias E.
出版事項: (2024)