Effect of thermo-vacuum modification on selected chemical, physical, and mechanical properties of Siberian larch (Larix sibirica L.) wood

QR Code

Effect of thermo-vacuum modification on selected chemical, physical, and mechanical properties of Siberian larch (Larix sibirica L.) wood

The primary aim of this research was to investigate and evaluate the effects of thermo-vacuum modification through forced convection on selected chemical, physical, and mechanical characteristics of Siberian larch (Larix sibirica L.) wood. Larch wood boards were thermally-modified, using press-vacuu...

Full description

Bibliographic Details
Published in:	Wood Material Science and Engineering
Main Author:	Lo Giudice V.L.; Antov P.; Koynov D.; Kristak L.; Lee S.H.; Lubis M.A.R.; Mecca M.; Moretti N.; Tiwari R.; Todaro L.
Format:	Article
Language:	English
Published:	Taylor and Francis Ltd. 2023
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85159350580&doi=10.1080%2f17480272.2023.2212253&partnerID=40&md5=d6c5ade2c63288f5961abdd0d240c8f8

Similar Items

Isocyanate–free tannin–based polyurethane resins for enhancing thermo-mechanical properties of ramie (Boehmeria nivea L.) fibers
by: Lubis M.A.R.; Aristri M.A.; Sari R.K.; Iswanto A.H.; Al-Edrus S.S.O.; Sutiawan J.; Lee S.H.; Antov P.; Kristak L.
Published: (2024)

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition
by: Iswanto A.H.; Manurung H.; Sohail A.; Hua L.S.; Antov P.; Nawawi D.S.; Latifah S.; Kayla D.S.; Kusumah S.S.; Lubis M.A.R.; Osvaldová L.M.; Hussin M.H.; Selvasembian R.; Chen L.W.; Nurcahyani P.R.; Kim N.H.; Fatriasari W.
Published: (2024)

Advanced Eco-Friendly Wood-Based Composites II
by: Antov P.; Lee S.H.; Lubis M.A.R.; Kristak L.; Réh R.
Published: (2023)

Eucalyptus: Engineered wood products and other applications
by: Lee S.H.; Lum W.C.; Antov P.; Krišt'ák L.; Lubis M.A.R.; Fatriasari W.
Published: (2023)

Preface
by: Lee S.H.; Lum W.C.; Antov P.; Krišt'ák L.; Lubis M.A.R.; Fatriasari W.
Published: (2023)

Preface
by: Lubis M.A.R.; Lee S.H.; Mardawati E.; Rahimah S.; Antov P.; Andoyo R.; Krišt’ák Ľ.; Nurhadi B.
Published: (2024)

Adhesion and Cohesion Performance of Polyurethane Made of Bio-Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood
by: Maulana S.; Setiawan I.P.; Pusbanarum D.; Antov P.; Iswanto A.H.; Kristak L.; Lee S.H.; Lubis M.A.R.
Published: (2024)

Performance of Oriented Strand Board Bonded with a Hybrid Phenol-Formaldehyde/Polymeric Methylene Diphenyl Diisocyanate Adhesives System
by: Sari R.K.; Fitrianum F.; Kristak L.; Maulana M.I.; Antov P.; Hidayat W.; Iswanto A.H.; Lee S.H.; Lubis M.A.R.
Published: (2024)

Latest Advancements in the Development of High-Performance Lignin- and Tannin-Based Non-Isocyanate Polyurethane Adhesive for Wood Composites
by: Iswanto A.H.; Lubis M.A.R.; Sutiawan J.; Al-Edrus S.S.O.; Lee S.H.; Antov P.; Kristak L.; Reh R.; Mardawati E.; Santoso A.; Kusumah S.S.
Published: (2023)

Particleboard from agricultural biomass and recycled wood waste: a review
by: Lee S.H.; Lum W.C.; Boon J.G.; Kristak L.; Antov P.; Pedzik M.; Rogozinski T.; Taghiyari H.R.; Lubis M.A.R.; Fatriasari W.; Yadav S.M.; Chotikhun A.; Pizzi A.
Published: (2022)

Performance of Oriented Strand Board Made of Heat-Treated Bamboo (Dendrocalamus asper (Schult.) Backer) Strands
by: Maulana S.; Suwanda A.A.; Murda R.A.; Antov P.; Komariah R.N.; Maulana M.I.; Augustina S.; Lee S.H.; Mahardika M.; Rianjanu A.; Taher T.; Kristak L.; Bindar Y.; Iswanto A.H.; Lubis M.A.R.
Published: (2024)

Effect of non-vacuum and vacuum conditions by electron beam irradiation (EBI) wet-soaked pretreatment method on oil palm crystallinity
by: Azizan A.; Jusri N.A.A.; Mohammed Faisal M.K.; Abd Rahman M.F.
Published: (2023)

IOT-Enabled Vacuum Cleaner Using Arduino
by: Shariffudin S.S.; Abdul Razak M.B.; Mohamad Saad P.S.; Hashim H.; Mamat M.H.
Published: (2023)

All Fiber Thermo-Optic Polarization Modulator with Chromium Carbide
by: Tan S.J.; Chang S.H.; Cheng X.S.; Tiu Z.C.; Haris H.; Muhammad A.R.; Markom A.M.; Harun S.W.
Published: (2024)

Improved of Smart Vacuum Flask with Beverage Identifier and Temperature Indicator
by: Apok M.A.; James W.A.; Abidin A.F.Z.; Hasim S.H.; Omar N.H.; Ibrahim T.N.T.
Published: (2020)

Effects of Boric Acid Pretreatment on the Properties of Four Selected Malaysian Bamboo Strips
by: Yusof N.M.; Hua L.S.; Tahir P.M.; James R.M.S.; Al-Edrus S.S.O.; Dahali R.; Roseley A.S.M.; Fatriasari W.; Kristak L.; Lubis M.A.R.; Reh R.
Published: (2023)

Investigation on weld induced distortion of butt and T-joints using thermo-elastic-FEM and experimental study
by: Shahar S.M.; Manurung Y.H.P.; Ridhwan R.M.; Robert N.L.; Ridzwan A.R.M.; Haruman E.; Sunhaji K.A.; Ghalib T.; Norasiah M.; Chan Y.C.
Published: (2011)

Engineering Wood Products from Eucalyptus spp.
by: Seng Hua L.; Wei Chen L.; Antov P.; Kristak L.; Md Tahir P.
Published: (2022)

Utilization of Spent Coffee Grounds as a Sustainable Resource for the Synthesis of Bioplastic Composites with Polylactic Acid, Starch, and Sucrose
by: Masssijaya S.Y.; Lubis M.A.R.; Nissa R.C.; Nurhamiyah Y.; Nugroho P.; Antov P.; Lee S.-H.; Papadopoulos A.N.; Kusumah S.S.; Karlinasari L.
Published: (2023)

Comparison of physico-chemical and thermo-mechanical properties of sungkai (Peronema canescens Jack.), sengon (Falcataria moluccana (Miq.) Barneby & J.W. Grimes), and teak (Tectona grandis L.f.) wood veneers
by: Bahanawan A.; Nurhamiyah Y.; Solihat N.N.; Fatriasari W.; Antov P.; Lee S.H.
Published: (2024)

Properties of Hybrid Plywood Produced by Utilisation of Peeler Cores
by: Koynov, et al.
Published: (2024)

Properties of Hybrid Plywood Produced by Utilisation of Peeler Cores
by: Koynov D.; Antov P.; Valyova M.; Savov V.; Dochev I.; Lee S.H.
Published: (2024)

Performance of Particleboard Made of Agroforestry Residues Bonded with Thermosetting Adhesive Derived from Waste Styrofoam
by: Karliati T.; Lubis M.A.R.; Dungani R.; Maulani R.R.; Hadiyane A.; Rumidatul A.; Antov P.; Savov V.; Lee S.H.
Published: (2024)

Diagnostic accuracy of tomosynthesis-guided vacuum assisted breast biopsy of ultrasound occult lesions
by: Bohan S.; Ramli Hamid M.T.; Chan W.Y.; Vijayananthan A.; Ramli N.; Kaur S.; Rahmat K.
Published: (2021)

Thermo-economic and environmental assessment of a combined cycle fueled by MSW and geothermal hybrid energies
by: Hai T.; Zhou J.; Almashhadani Y.S.; Chaturvedi R.; Alshahri A.H.; Almujibah H.R.; Metwally A.S.M.; Ullah M.
Published: (2023)

Electro-Thermo-Mechanical Integrity of Electric Vehicle Battery Interconnects Using Micro-TIG Welding
by: Abd Manan A.A.; Amir A.; Arifin N.M.; Mhd Noor E.E.
Published: (2024)

Molecular weight cut-off and structural analysis of vacuum-assisted titania membranes for water processing
by: Jalil S.N.A.; Wang D.K.; Yacou C.; Motuzas J.; Smart S.; da Costa J.C.D.
Published: (2016)

Optimization of the Vacuum Fractional Distillation Process for Enhancing the α-Guaiene of Patchouli Oil with Response Surface Methodology
by: Widyasanti A.; Nurjanah S.; Nurhadi B.; Osman C.P.
Published: (2023)

Effects of Compression Ratio and Phenolic Resin Concentration on the Properties of Laminated Compreg Inner Oil Palm and Sesenduk Wood Composites
by: Ahamad W.N.; Salim S.; Lee S.H.; Abdul Ghani M.A.; Mohd Ali R.A.; Md Tahir P.; Fatriasari W.; Antov P.; Lubis M.A.R.
Published: (2023)

4-methylcatechol-treated jute-bamboo hybrid composites: Effects of pH on thermo-mechanical and morphological properties
by: Liew F.K.; Hamdan S.; Rahman M.R.; Mahmood M.R.; Rahman M.M.; Lai J.C.H.; Sultan M.T.
Published: (2016)

The Use of Vacuum Residue as a Potential Rejuvenator in Reclaimed Asphalt Pavement: Physical, Rheological, and Mechanical Traits Analysis
by: Al-Saffar Z.H.; Eltwati A.; Aziz E.E.; Yaacob H.; Dawood H.A.; Jaya R.P.; Jawahery M.S.A.; Shaffie E.
Published: (2023)

Utilization of Scots Pine (Pinus sylvestris L.) Timber with Defects in Production of Engineered Wood Products; [Iskorištavanje borovine (Pinus sylvestris L.) s greškama za proizvodnju kompozitnog drva]
by: Koynov D.; Valyova M.; Parzhov E.; Hua L.S.
Published: (2023)

Mechanical and morphological characterizations of epoxy composites reinforced with surface modified woven cotton structures using vacuum bagging technique
by: Owen M.M.; Achukwu E.O.; Anjang Ab Rahman A.; Romli A.Z.; Ahmad M.R.; Shuib S.B.; Md Akil H.
Published: (2024)

A two-year comparative assessment of retention of arch width increases between modified vacuum-formed and Hawley retainers: a multi-center randomized clinical trial
by: Ashari A.; Nik Mustapha N.M.; Yuen J.J.X.; Saw Z.K.; Lau M.N.; Xian L.; Syed Mohamed A.M.F.; Megat Abdul Wahab R.; Yeoh C.K.; Deva Tata M.; Sinnasamy S.
Published: (2022)

Characterization, bioactivity evaluation, thermo-kinetic studies of mango (Mangifera indica L.) peel extract, and its applicability in oxidative stabilization of biodiesel
by: Bello U.; Amran N.A.; Ruslan M.S.H.; Adamu H.
Published: (2024)

Latest advancements in high-performance bio-based wood adhesives: A critical review
by: Hussin M.H.; Abd Latif N.H.; Hamidon T.S.; Idris N.N.; Hashim R.; Appaturi J.N.; Brosse N.; Ziegler-Devin I.; Chrusiel L.; Fatriasari W.; Syamani F.A.; Iswanto A.H.; Hua L.S.; Al Edrus S.S.A.O.; Lum W.C.; Antov P.; Savov V.; Rahandi Lubis M.A.; Kristak L.; Reh R.; Sedliačik J.
Published: (2022)

Heat distribution improvement with the implementation of polyethylene-covered water bolus into breast cancer hyperthermia
by: Wong V.L.; Lias K.B.; Basri H.M.; Buniyamin N.
Published: (2023)

Demystifying the links between green technology innovation, economic growth, and environmental tax in ASEAN-6 countries: The dynamic role of green energy and green investment
by: Sharif A.; Kocak S.; Khan H.H.A.; Uzuner G.; Tiwari S.
Published: (2023)

An improved metacognitive competency framework to inculcate analytical thinking among university students
by: Anthonysamy L.; Sugendran P.; Wei L.O.; Hoon T.S.
Published: (2024)

Tick-associated Trypanosoma species (Apicomplexa: Kinetoplastida) from cattle ticks (Acari: Ixodidae) in Peninsular Malaysia
by: Kazim A.R.; Low V.L.; Houssaini J.; Tappe D.; Heo C.C.
Published: (2024)