Failure of 24 Inches Blowdown Tower Inlet Nozzle Due to Cyclic Surge Forces

QR Code

Failure of 24 Inches Blowdown Tower Inlet Nozzle Due to Cyclic Surge Forces

Blowdown tower is one of the equipment in closed blowdown system (CBS) in Delay Coker unit in petroleum refinery. The primary intended function of the CBS is to flush out hydrocarbon vapours from coke drum using high pressure steam into blowdown tower. The system is operating in batches and cycles,...

Full description

Bibliographic Details
Published in:	Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Main Author:	Awang Ahmad M.Z.; Nurudin S.M.; Anuar A.; Yob M.S.; Omar M.A.
Format:	Article
Language:	English
Published:	Semarak Ilmu Publishing 2023
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85177686553&doi=10.37934%2farfmts.109.2.7985&partnerID=40&md5=8d4c98597dbf55c35557c66c1097415e

Similar Items

Fabrication of Uniform Aluminium Nitrate Thin Film on 2-inch Silicon Substrate
by: Abdullah S.A.B.; Abd Aziz N.S.B.; Mamat M.H.; Azman Z.; Sahari N.; Mohamed A.N.; Wijaya Y.P.; Nayan N.
Published: (2023)

Effect of high inlet temperature of spray dryer on viability of microencapsulated trichoderma asperellum conidia
by: Ishak A.A.; Zulkepli F.R.A.; Hayin N.F.M.; Md Zain N.H.; Sapak Z.
Published: (2021)

Effect of earthing enhancing compound (EEC) on improving tower footing resistance of a 500 kV tower in a rocky area
by: Nasir N.A.F.M.; Ab Kadir M.Z.A.; Osman M.; Abd Rahman M.S.; Ungku Amirulddin U.A.; Mohd Nasir M.S.; Zaini N.H.; Nik Ali N.H.
Published: (2021)

Failure analysis of woven kevlar/epoxy composite laminates under compression due to variations in fiber orientation
by: Mali M.; Hussain A.K.; Muzafar M.A.; Zainol A.F.M.; Mahmud J.
Published: (2019)

Numerical investigation on the performance of a solar air heater using inclined impinging jets on absorber plate with parallel and crossing orientation of nozzles
by: Hai T.; B Mansir I.; Alshuraiaan B.; M Abed A.; Elhosiny Ali H.; Dahari M.; Albalawi H.
Published: (2023)

Investigation of Lightning Electromagnetic Fields on the Distribution Power Lines Close to the Line Corridor Towers
by: Rameli N.; Fariz F.N.; Kadir M.Z.A.; Ali N.H.N.; Ghani A.B.A.; Zaini N.H.
Published: (2024)

The impact of using a turbulator at the nanofluid flow inlet to cool a solar panel in the presence of phase change materials using artificial intelligence
by: Hai T.; Awad O.I.; Li S.; Zain J.M.; Bash A.A.H.K.
Published: (2023)

Effect of age on bite force
by: Chong M.X.; Khoo C.D.; Goh K.H.; Rahman F.; Shoji Y.
Published: (2016)

Geophysical method exploration for slope failure investigation
by: Abdullah N.H.; Mohamed Jais I.B.; Awang H.
Published: (2020)

Characterization of Long-chain fatty ester (Loxiol GXX): A study on heat transfer of spray tower
by: Ideris N.; Zulkipli N.S.
Published: (2022)

Influence of lightning current parameters and earthing system designs on tower footing impedance of 500 kV lines
by: Mohamad Nasir N.A.F.; Ab Kadir M.Z.A.; Osman M.; Abd Rahman M.S.; Ungku Amirulddin U.A.; Mohd Nasir M.S.; Zaini N.H.; Nik Ali N.H.
Published: (2021)

Cyclic voltammetry readout circuitry for dna biosensor application
by: Hamzah I.H.; Malik A.A.; Rahim A.F.A.; Soh Z.H.C.
Published: (2021)

Microstructure of nanosilica modified binder by atomic force microscopy
by: Samsudin M.S.; Arshad A.K.; Ahmad J.; Masri K.A.
Published: (2016)

Prediction of Cutting Forces for Machine Tools by Neural Networks
by: Kataraki P.S.; Ishak A.; Mazlan M.; Qasem I.; Hussien A.A.; Zubair A.F.; Janvekar A.A.
Published: (2024)

Prediction of Cutting Forces for Machine Tools by Neural Networks
by: Kataraki, et al.
Published: (2024)

Cyclic redundancy check-aided successive cancellation-based polar decoders
by: Suhaimi H.; Mohamad R.; Ali D.M.; Abdullah E.
Published: (2023)

Analysis of blended fuel properties and engine cyclic variations with ethanol additive
by: Ali O.M.; Mamat R.; Abdullah N.R.; Abdullah A.A.
Published: (2015)

Fatigue of notched steel hollow sections under sinusoidal cyclic loading
by: Jaini Z.M.; Sugiura K.; Sato A.; Jamaluddin N.; Badrul Azman M.F.N.; Abdul Kudus S.
Published: (2024)

Design, modeling and multi-objective techno-economic optimization of an integrated supercritical Brayton cycle with solar power tower for efficient hydrogen production
by: Hai T.; Dhahad H.A.; ATTIA E.-A.; Zakaria Z.; Rashidi S.; Kumar Singh P.; Shamseldin M.A.; Fahad Almojil S.; Ibrahim Almohana A.; Fahmi Alali A.; Farhang B.; Cao Y.
Published: (2022)

Characteristics of patients admitted with heart failure: Insights from the first Malaysian Heart Failure Registry
by: Ahmad, et al.
Published: (2023)

Characteristics of patients admitted with heart failure: Insights from the first Malaysian Heart Failure Registry
by: Wan Ahmad W.A.; Abdul Ghapar A.K.; Zainal Abidin H.A.; Karthikesan D.; Ross N.T.; S.K. Abdul Kader M.A.; Loch A.; Mahendran K.; Ramli A.W.; Ong T.K.; Mohd Amin N.H.; Lee C.Y.; Che Hassan H.H.; Zainal Abidin S.K.; Liew H.B.; Ho W.S.; Mohd Ghazi A.
Published: (2024)

A Review of Force Control Techniques in Friction Stir Process
by: Busu N.; Jaffarullah M.S.; Low C.Y.; Shaari M.S.B.; Armansyah; Jaffar A.
Published: (2015)

Profiling and mitigating brute force attack in home wireless LAN
by: Hafiz M.Y.M.; Mohd Ali F.H.
Published: (2014)

Comparison of ground reaction force during different angle of squatting
by: Dali S.; Justine M.; Ahmad H.; Othman Z.
Published: (2013)

Approximate analytical solution for the forced korteweg-de vries equation
by: David V.D.; Nazari M.; Barati V.; Salah F.; Abdul Aziz Z.
Published: (2013)

Analysis of Helical Antenna for Wireless Application at 2.4 GHz
by: Jaafar A.N.; Ja'afar H.; Pasya I.; Yamada Y.; Abdullah R.; Aris M.A.; Redzwan F.N.M.
Published: (2019)

Impact of earthing system designs and soil characteristics on tower footing impedance and ground potential rise: A modelling approach for sustainable power operation
by: Nasir N.A.F.M.; Kadir M.Z.A.A.; Osman M.; Rahman M.S.A.; Amirulddin U.A.U.; Nasir M.S.M.; Zaini N.H.; Ali N.H.N.
Published: (2021)

Characterization of Rubber Degradation in a Brake Wheel Cylinder under Cyclic Loading
by: Abdullah A.H.; Wahid M.F.A.; Samsuddin N.M.; Solihin Z.H.; Manan N.F.A.
Published: (2023)

Huffrith Algorithm with Quasi Cyclic Low Density Parity Check in NOMA Systems
by: Idrus N.A.; Idris A.; Razak N.I.A.; Taib I.; Muharlisiani L.T.
Published: (2024)

Cyclic Behaviour of Beam-Column Joints with Corbels under In-Plane Lateral Loads
by: Kay Dora A.G.; Hamid N.H.; Rozli M.I.F.; Che Nooryohana Z.
Published: (2020)

Synthesis, evaluation of antioxidant activity and crystal structure of 2,4-dimethylbenzoylhydrazones
by: Taha M.; Ismail N.H.; Jamil W.; Yousuf S.; Jaafar F.M.; Ali M.I.; Kashif S.M.; Hussain E.
Published: (2013)

Comparison of the Effect of Different Alcohol Additives with Blended Fuel on Cyclic Variation in Diesel Engine
by: Ali O.M.; Abdullah N.R.; Mamat R.; Abdullah A.A.
Published: (2015)

Laplacian Spectrum and Energy of the Cyclic Order Product Prime Graph of Semi-dihedral Groups
by: Mohamed N.; Ali N.M.M.; Bello M.
Published: (2024)

Management of chronic heart failure in primary care: What evidence do we have for heart failure with preserved systolic function?
by: Ramli A.S.; Jackson B.; Toh C.T.; Ambigga D.; Piterman L.
Published: (2010)

Characteristics of Different Groups of Flare-CME in the Minimum to Rising Phase of Solar Cycle 24; [(Pencirian Kumpulan Berbeza Suar-CME dalam Fasa Minimum hingga Fasa Menaik Kitaran Suria 24)]
by: Ansor N.M.; Hamidi Z.S.; Shariff N.N.M.
Published: (2023)

Intelligent Optimization of Force Tracking Parameters for MR Damper Modelling using Firefly Algorithm
by: Ab Talib M.H.; Darus I.Z.M.; Yatim H.M.; Shaharuddin N.M.R.; Hadi M.S.; Jamali A.
Published: (2019)

The forces of revenue recognition standard changes in a telecommunication company: A qualitative approach
by: Fauzi S.I.M.; Ali M.M.; Ghani E.K.
Published: (2024)

Force sensor detection and performance evaluation of new active system ankle foot orthosis
by: Hamid A.; Patar M.N.A.A.; Ayub M.A.
Published: (2012)

Wireless Walking Pattern Detection Using Force Sensitive Resistor Pressure Sensors on Footwear
by: Khairuddin N.Z.; Halim I.S.A.; Azreen A.N.; Musa A.; Hassan S.L.M.; Tulos N.
Published: (2023)

Evaluation of boosted regression tree for the prediction of the maximum 24-hour concentration of particulate matter
by: Shaziayani W.N.; Ul-Saufie A.Z.; Yusoff S.A.M.; Ahmat H.; Libasin Z.
Published: (2021)