Buckling behaviour of steel dome cap design under external pressure

QR Code

Buckling behaviour of steel dome cap design under external pressure

This study aims to numerically investigate the buckling behaviour of externally pressurised dome caps. Following the recommendations of the European Standard EN 1993-1-6, there was good agreement between the Finite Element (FE) model and the experimental results, with an average difference of less t...

Full description

Bibliographic Details
Published in:	International Journal of Pressure Vessels and Piping
Main Author:	Ismail M.S.; Muhammad al-Attas S.M.; Mahmud J.
Format:	Article
Language:	English
Published:	Elsevier Ltd 2024
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85182600106&doi=10.1016%2fj.ijpvp.2024.105135&partnerID=40&md5=5b20107bfdc8a382756b995516e5532a

Similar Items

Buckling behaviour of steel dome cap design under external pressure
by: Ismail, et al.
Published: (2024)

Buckling and Postbuckling Analysis of Stiffened Cylindrical Shells Subjected to Axial Compression and External Pressure
by: Ismail M.S.; Mahmud J.
Published: (2024)

Influence of steel fibres on friction behaviours with respect to speed, pressure and temperature
by: Jaafar T.R.; Ismail N.I.; Ismail M.F.; Othman E.A.
Published: (2017)

Predicting transmittance, absorptions and reflectance characteristics for the design of transparent dome passive daylight collector
by: Sulaiman F.; Ahmad A.; Ahmed A.Z.
Published: (2002)

Progressive Collapse of a Single Layer Schwedler Dome
by: Sahol Hamid Y.; Kamilan N.F.
Published: (2021)

Structural behaviour of cold-formed cut-curved channel steel section under compression
by: Sani M.S.H.M.; Muftah F.; Tan C.S.; Tahir M.M.
Published: (2015)

Mass optimization of four bar linkage using genetic algorithms with dual bending and buckling constraints
by: Hassan M.R.A.; Azid I.A.; Ramasamy M.; Kadesan J.; Seetharamu K.N.; Kwan A.S.K.; Arunasalam P.
Published: (2010)

FEA Modelling of Externally-Strengthened Concrete Beam with CFRP Plates Under Flexural Test
by: Maulana M.R.; Ahmad H.; Mansor H.
Published: (2022)

Evaluation of the Behaviour of Steel Bar in the Concrete under Cyclic Loading Using Magnetic Flux Leakage and Acoustic Emission Techniques
by: Md Nor N.; Abdullah S.; Mohamad Halim M.A.H.; Arifin A.
Published: (2023)

Comparative corrosion behaviour of austenitic 316L and duplex 2205 stainless steels: microstructure and property evolution at highly partial pressure of H2S
by: Shah M.; Ayob M.T.M.; Yaakob N.; Embong Z.; Othman N.K.
Published: (2022)

Behaviour and design of eccentrically loaded hot-rolled steel SHS and RHS stub columns at elevated temperatures
by: Yun X.; Saari N.; Gardner L.
Published: (2020)

Stability, electronic and optical properties of buckled XO (X = Ge, Cu) graphenylene monolayers: A first-principles study
by: Abdullahi Y.Z.; Ahmad S.; Hui R.C.Y.
Published: (2024)

Flexural behaviour of RC beams with steel and polypropylene fibres
by: Lee S.W.; Hassan R.; Saari N.; Mohamad N.M.; Mat Noor N.I.
Published: (2019)

Performance of Bamboo and Steel Reinforced Concrete under Flexural Strength
by: Rahman P.E.H.A.; Malek N.J.A.; Bahari M.H.B.; Hassan R.
Published: (2020)

Fatigue of notched steel hollow sections under sinusoidal cyclic loading
by: Jaini Z.M.; Sugiura K.; Sato A.; Jamaluddin N.; Badrul Azman M.F.N.; Abdul Kudus S.
Published: (2024)

The Effect of Corroded Offshore Pipeline Under Combine Loads: Bending and Burst Pressure Using FEA
by: Fadzil, et al.
Published: (2024)

Comparison of MyRTKnet Performance with Various Real-Time Corrections Based on Different Time
by: Al-Attas S.H.M.; Latip A.S.A.; Din A.H.M.; Al-Attas S.I.
Published: (2023)

The Effect of H2S Pressure on the Formation of Multiple Corrosion Products on 316L Stainless Steel Surface
by: Shah M.; Ayob M.T.M.; Rosdan R.; Yaakob N.; Embong Z.; Othman N.K.
Published: (2020)

Pandemic COVID-19 and Under Pressure: Exploring Women in Aviation Challenges
by: Besar Sa’Aid H.; Sa’aid H.B.; Noh H.M.
Published: (2023)

LATENT FINGERPRINTS TECHNIQUES AND THE USE OF STARCH TO IDENTIFY THE PRINTS: A MINI-REVIEW; [Teknik Cap Jari Tidak Kelihatan dan Penggunaan Kanji Sebagai Bahan Asas untuk Mengenal Pasti Cap Jari: Ulasan Ringkas]
by: Ahmad Shukri A.I.; Ahmad N.; Ab’lah N.
Published: (2023)

Plasticity and strength Behaviour of marine clay stabilized with waste steel dust for soil improvement works
by: Abdullah N.H.H.; A. Talibsyahirah; Ahmad A.; Ismail N.
Published: (2021)

Strengthening method and structural performance of cold-formed cut-curved steel under compression
by: Mohd Sani M.S.H.; Muftah F.; Siang Tan C.; Md Tahir M.
Published: (2016)

An Instrument to Measure Perceived Cognitive, Affective, and Psychomotor (CAP) Learning for Online Laboratory in Technology and Engineering Courses
by: Ying S.T.; Mun N.K.; Rahim A.A.A.; Addi M.M.; Osman M.
Published: (2023)

Evaluation of phytoactive contents and antibacterial activities of green synthesised cerium oxide nanoparticles using Melastoma sp. leaf extract as the capping agent
by: Hasan, et al.
Published: (2024)

Motives and External Factors of Obtaining JAKIM Halal Certification Among SMEs Food Manufacturers: A Descriptive Analysis
by: Nazaria Z.A.; Bahtar A.Z.; Karim R.A.; Jamian N.F.; Mahmud N.
Published: (2024)

A comparative study of the tribocorrosion behaviour of low temperature nitrided austenitic and duplex stainless steels in NaCl solution
by: Haruman E.; Sun Y.; Adenan M.S.
Published: (2020)

Cracking behavior of sea sand RC beam bonded externally with CFRP plate
by: Al-Fakih A.; Hisbany Mohd Hashim M.; Alyousef R.; Mutafi A.; Hussein Abo Sabah S.; Tafsirojjaman T.
Published: (2021)

Positive Pressure and Negative Pressure Irrigation Dynamics with Different Needle Designs Using Computational Fluid Dynamics
by: Wan N.F.; Ramlan N.A.; Mahmood N.Z.N.; Hamid A.H.A.
Published: (2023)

Positive Pressure and Negative Pressure Irrigation Dynamics with Different Needle Designs Using Computational Fluid Dynamics
by: Wan, et al.
Published: (2023)

Behaviour of dry mix EPs mortar panel under axial eccentric loading
by: Ain A.S.N.; Kartini K.; Hisbany M.H.M.; Hamidah M.S.
Published: (2019)

Mechanical Behaviour Slenderness Ratio of 13 Solid Wall Panels Under Uniformly Distributed Load
by: Ruslan, et al.
Published: (2024)

Temperature rise of cold-formed steel built-up back-to-back column under standard fire
by: Muftah F.; Mohd Sani M.S.H.; Mohammad S.; Poi Ngian S.; Md Tahir M.
Published: (2016)

Single event latch-up detection for nano-satellite external solar radiation mitigation system
by: Ya’Acob N.; Ayob M.F.; Tajudin N.; Kassim M.; Yusof A.L.
Published: (2020)

Review on column fire resistance design for concrete filled steel tube
by: Kado B.; Mohammad S.; Lee Y.H.; Shek P.N.; Kadir M.A.A.; Muftah F.
Published: (2018)

Internal oxidation of Ni-Cr-Al alloys under various oxygen partial pressures at 1273 K
by: Ani M.H.; Herman S.H.; Suryanto; Othman R.
Published: (2012)

Sol-gel based copper metallic layer as external anode for microtubular solid oxide fuel cell
by: Shabri H.A.; Rudin S.N.F.M.; Othman M.H.D.; Jamil S.M.; Kamal S.N.E.A.M.; Abu Bakar S.; Osman N.; Jaafar J.; Rahman M.A.; Ismail A.F.
Published: (2022)

MORPHOLOGICAL BEHAVIOR OF FEB AND FE2B IN BORIDE LAYER OF 304 STAINLESS STEEL UNDER DIFFERENT MEDIUM
by: Abdullah B.; Alias S.K.; Latif M.N.H.A.; Ahmad N.; Sulaiman S.A.; Rahmat S.N.
Published: (2022)

Application of deep learning and feature selection technique on external root resorption identification on CBCT images
by: Reduwan N.H.; Abdul Aziz A.A.; Mohd Razi R.; Abdullah E.R.M.F.; Mazloom Nezhad S.M.; Gohain M.; Ibrahim N.
Published: (2024)

Experimental Bond Behaviour of Glued-In Rod Connection for Mengkulang Glulam under Pull-Out Loading
by: Hussin T.A.R.; Hassan R.; Awaludin A.; Sidek M.N.M.; Hamid N.H.A.; Salit M.S.
Published: (2022)

Role of GaN cap layer for reference electrode free AlGaN/GaN-based pH sensors
by: Parish G.; Khir F.L.M.; Krishnan N.R.; Wang J.; Krisjanto J.S.; Li H.; Umana-Membreno G.A.; Keller S.; Mishra U.K.; Baker M.V.; Nener B.D.; Myers M.
Published: (2019)