Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen

QR Code

Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen

Hydrogen is an ideal alternative fuel due to its carbon-free content, wide flammability limit, high specific energy, and unique physical and thermo-chemical behavior. Hydrogen-powered internal combustion engine (H2-ICE) has been experimentally proven to achieve greater brake thermal efficiency compa...

書目詳細資料
發表在:	International Journal of Hydrogen Energy
主要作者:	Khalid A.H.; Muhamad Said M.F.; Veza I.; Abas M.A.; Roslan M.F.; Abubakar S.; Jalal M.R.
格式:	Review
語言:	English
出版:	Elsevier Ltd 2024
在線閱讀:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85190337251&doi=10.1016%2fj.ijhydene.2024.04.087&partnerID=40&md5=97df45199892a2cd1d29d8a0ff995bd4

相似書籍

Fault injection test on mitigated benchmark circuits using FPGA
由: 2-s2.0-85185816454
出版: (2024)

Implementation of a Non-Surfactant Water-in-Diesel Emulsion Fuel in a Common Rail Direct Injection Diesel Vehicle
由: Abdul Rahman H.; Rahman M.M.; Yahya W.J.; Kaonain T.E.; Abd Kadir H.; Tamam M.Q.M.; Ithnin A.M.; Ahmad F.; Abdullah M.F.E.; Noge H.; Hong C.; Otaka T.; Kinoshita E.
出版: (2023)

Implementation of a Non-Surfactant Water-in-Diesel Emulsion Fuel in a Common Rail Direct Injection Diesel Vehicle
由: 2-s2.0-85170376176
出版: (2023)

An Integrated Heat Recovery System Design for a Fuel Cell Buggy With Hydrogen Preheating and Thermoelectric Generator
由: Hamdan, et al.
出版: (2025)

An Integrated Heat Recovery System Design for a Fuel Cell Buggy With Hydrogen Preheating and Thermoelectric Generator
由: Hamdan M.H.; Mohamed W.A.N.W.; Aminudin M.A.; Kamarudin S.K.; Zakaria I.A.; Singh B.
出版: (2025)

Improving Air-Fuel Mixing in Diesel Engine Fuelled by Higher Viscous Fuel Using Guide Vane Swirl and Tumble Device (GVSTD)
由: Saad I.; Bari S.
出版: (2013)

Top of Line Corrosion (TLC) Mitigation using Volatile Corrosion Inhibitor (VCI) via Batch and Continuous Injection in Sweet Environment System
由: Jarni H.H.; Mohd Zaidin M.Z.I.; Mohd Razlan M.R.; Yaakob N.
出版: (2024)

Design of a biomass-fueled system to produce hydrogen/power: Environmental analyses and Bi-objective optimization
由: 2-s2.0-85144804375
出版: (2024)

RETRACTION: Neural network-based optimization of hydrogen fuel production energy system with proton exchange electrolyzer supported nanomaterial
由: Hai, et al.
出版: (2025)

Graphene for hydrogen energy storage - A comparative study on GO and rGO employed in a modified reversible PEM fuel cell
由: Jindal H.; Oberoi A.S.; Sandhu I.S.; Chitkara M.; Singh B.
出版: (2021)

Retraction notice to “Neural network-based optimization of hydrogen fuel production energy system with proton exchange electrolyzer supported nanomaterial” [Fuel 332 (2023) 125827] (Fuel (2023) 332(P1), (S0016236122026540), (10.1016/j.fuel.2022.125827))
由: 2-s2.0-86000436771
出版: (2025)

Integrated Heat Regenerator (IHR) Designs with Hydrogen Preheater and Thermoelectric Generator for Power Enhancement of a 2 kW Fuel Cell Vehicle
由: 2-s2.0-85132363861
出版: (2022)

How to select healthy sperm for intracytoplasmic sperm injection in samples with high sperm DNA fragmentation?
由: Garrido N.; Gül M.; Jindal S.; Vogiatzi P.; Saleh R.; Durairajanayagam D.; Parmegiani L.; Boitrelle F.; Colpi G.M.; Agarwal A.
出版: (2023)

Synthesis route towards fine and monodisperse Ni nanoparticles via hot-injection approach
由: 2-s2.0-84886256454
出版: (2013)

Microstructural and physical properties of yttria stabilized zirconia (YSZ) prepared by ceramic injection moulding (CIM)
由: 2-s2.0-85119196043
出版: (2021)

Application of sodium chloride as space holder for powder injection molding of alloy Titanium-Hydroxyapatite composites
由: 2-s2.0-85106916632
出版: (2021)

Experimental study of ceramic coated piston crown for compressed natural gas direct injection engines
由: 2-s2.0-84899506074
出版: (2013)

Sperm morphology assessment in the era of intracytoplasmic sperm injection: Reliable results require focus on standardization, quality control, and training
由: Agarwal A.; Sharma R.; Gupta S.; Finelli R.; Parekh N.; Selvam M.K.P.; Henkel R.; Durairajanayagam D.; Pompeu C.; Madani S.; Belo A.; Singh N.; Covarrubias S.; Darbandi S.; Sadeghi R.; Darbandi M.; Vogiatzi P.; Boitrelle F.; Simopoulou M.; Saleh R.; Arafa M.; Majzoub A.; Kandil H.; Zini A.; Ko E.; Alvarez J.G.; Martinez M.; Ramsay J.; Jindal S.; Busetto G.M.; Sallam H.; Maldonado I.; Anagnostopoulou C.; Alves M.G.; Sengupta P.; Gilany K.; Evenson D.P.; Lewis S.E.M.; Gosalvez J.; Ambar R.F.; Shah R.
出版: (2021)

Mathematical modeling of plastic injection molding parameters to study the product quality through mechanical property evaluation
由: Venkatason K.; Sivaguru S.; Paizar A.R.; Roseley N.R.N.
出版: (2023)

Next frontier in photocatalytic hydrogen production through CdS heterojunctions
由: Islam A.; Malek A.; Islam M.T.; Nipa F.Y.; Raihan O.; Mahmud H.; Uddin M.E.; Ibrahim M.L.; Abdulkareem-Alsultan G.; Mondal A.H.; Hasan M.M.; Salman M.S.; Kubra K.T.; Hasan M.N.; Sheikh M.C.; Uchida T.; Rasee A.I.; Rehan A.I.; Awual M.E.; Hossain M.S.; Waliullah R.M.; Awual M.R.
出版: (2025)

Surface Characterization of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System
由: Saedon, et al.
出版: (2024)

Sperm morphology assessment in the era of intracytoplasmic sperm injection: Reliable results require focus on standardization, quality control, and training
由: 2-s2.0-85110195134
出版: (2021)

Synthesis of structured carbon nanorods for efficient hydrogen storage
由: 2-s2.0-84967316045
出版: (2016)

Next frontier in photocatalytic hydrogen production through CdS heterojunctions
由: Islam, et al.
出版: (2025)

Eco-Friendly Approaches to Hydrogen Production: Efficiency and Innovations in Ammonia Decomposition
由: Hamid A.; Shaffee S.N.A.; Deris R.R.R.; Hin T.Y.Y.; Hua T.Y.; Dah J.; Ibrahim M.L.
出版: (2025)

Next frontier in photocatalytic hydrogen production through CdS heterojunctions
由: 2-s2.0-85214240172
出版: (2025)

Gold Recovery from Thiosulfate Solutions using Hydrogen Peroxide
由: 2-s2.0-85186984796
出版: (2024)

A Review of the Emulsification Method for Alternative Fuels Used in Diesel Engines
由: Hamid M.F.; Teoh Y.H.; Idroas M.Y.; Mohamed M.; Sa’ad S.; Mat S.C.; Abdullah M.K.; Le T.D.; How H.G.; Nguyen H.T.
出版: (2022)

An overview of polymer electrolyte membrane electrolyzer for hydrogen production: Modeling and mass transport
由: 2-s2.0-84957890876
出版: (2016)

MALAYAN TAPIR ROADKILL: ASSESSMENT TOWARDS ROAD USER AND MITIGATION STRATEGIES
由: Shabuddin, et al.
出版: (2025)

Influence of Surface Characteristics of Palm Shell Activated Carbon Modified with Nanostructured Nickel for Reactive Adsorption of Hydrogen Sulfide
由: Abdullah N.; Mohamed A.R.; Ramli M.Z.; Nor N.M.
出版: (2022)

A comprehensive review of challenges, prospects, and future perspectives for hydrogen energy development in Malaysia
由: 2-s2.0-85178244420
出版: (2024)

Utilisation of palm oil fuel ash (POFA) as cement replacement by using powder and liquidation technique
由: Sidek M.N.M.; Hashim N.H.; Rosseli S.R.; Nor M.R.M.; Ismail S.; Saman H.M.; Arshad M.F.; Alisibramulisi A.; Zainudin F.
出版: (2018)

Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system
由: Ismail M.H.; Sidambe A.T.; Figueroa I.A.; Davies H.A.; Todd I.
出版: (2010)

Analysis of blended fuel properties and engine performance with palm biodiesel-diesel blended fuel
由: 2-s2.0-84939230739
出版: (2015)

Hydrogen integration in power grids, infrastructure demands and techno-economic assessment: A comprehensive review
由: Sikiru S.; Adedayo H.B.; Olutoki J.O.; Rehman Z.U.
出版: (2024)

Preparation of bio-polyol via bamboo wastes liquefaction and the effects of bleaching by hydrogen peroxide treatment
由: James, et al.
出版: (2025)

Hydrogen-powered horizons: Transformative technologies in clean energy generation, distribution, and storage for sustainable innovation
由: 2-s2.0-85182018174
出版: (2024)

Biomass Lignin Integrated Polymeric Carbon Nitride for Boosted Photocatalytic Hydrogen and Oxygen Evolution Reactions
由: 2-s2.0-85121762687
出版: (2022)

Stress at the Helm: the Prevalence and Key Risk Factors of Occupational Stress Among Port Workers in the Port Terminal Industry
由: Yaakub N.; Razak N.F.A.; Baharuddin M.R.; Noor M.A.M.
出版: (2024)