Numerical analysis on frictional heat effect in Polyether-ether-ketone (PEEK)/steel pair by using openFOAM model

QR Code

Numerical analysis on frictional heat effect in Polyether-ether-ketone (PEEK)/steel pair by using openFOAM model

The PEEK material has been applied to a sliding bearing system in a power plant system because of its high mechanical durability. In the solid friction of the PEEK materials, the frictional heat becomes the important factor because the temperature increase due to the frictional heat causes the rapid...

Full description

Bibliographic Details
Published in:	Journal of Advanced Research in Numerical Heat Transfer
Main Author:	Bahrom M.Z.; Manshoor B.; Talib N.; Zaman I.; Didane D.H.; Haq R.H.A.; Ghafir M.F.A.; Murat N.A.A.; Mohamed Z.; Ibrahim M.N.
Format:	Article
Language:	English
Published:	Penerbit Akademia Baru 2024
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85203079206&doi=10.37934%2farnht.21.1.113&partnerID=40&md5=3162abc98d8eae5e279df3a4e19ec19a

Similar Items

Electrospun strontium cross-linked sulfonated poly (Ether ether ketone) speek nanofiber for proton exchange membrane fuel cell
by: Indong E.S.E.; Sekak K.A.
Published: (2020)

CFD SIMULATION AND VALIDATION FOR MIXING VENTILATION SCALED-DOWN EMPTY AIRCRAFT CABIN USING OPENFOAM
by: Sarmin S.A.; Razak A.A.; Jerai F.; Harun M.K.
Published: (2023)

Master-Slave Serial Communication in Balanced Twisted Pair Cables
by: Annuar I.; Ahmad N.; Hassan M.M.; Ispawi D.I.
Published: (2024)

Discovering the DPPH Free Radical Scavenging Activity of Azine Derivatives Bearing Ethyl Phenyl Ketone Moiety
by: Rehman M.U.; Alam A.; Shah S.A.A.; Ali A.; Ali Q.; AlAsmari A.F.; Alasmari F.; Khan M.
Published: (2024)

Discovering the DPPH Free Radical Scavenging Activity of Azine Derivatives Bearing Ethyl Phenyl Ketone Moiety
by: Rehman, et al.
Published: (2024)

Additive friction stir deposition
by: Gopan V.; Natarajan V.D.; Sarath S.; Varughese R.T.; Kumar P.
Published: (2023)

Facile synthesis of nanosized La/ZrO2 catalysts for ketonization of free fatty acid and biomass feedstocks
by: Zaidi S.; Asikin-Mijan N.; Hussain A.S.; Mastuli M.S.; Alharthi F.A.; Alghamdi A.A.; Taufiq-Yap Y.H.
Published: (2021)

Heterozygous familial hypercholesterolaemia in a pair of identical twins: A case report and updated review
by: Mohd Nor N.S.; Al-Khateeb A.M.; Chua Y.-A.; Mohd Kasim N.A.; Mohd Nawawi H.
Published: (2019)

Enhancing Students’ Writing Performance in Higher Learning through Think-Write-Pair-Share: An Experimental Study
by: Naim I.A.M.; Luqman N.M.A.N.; Matmin J.
Published: (2020)

A Review of Force Control Techniques in Friction Stir Process
by: Busu N.; Jaffarullah M.S.; Low C.Y.; Shaari M.S.B.; Armansyah; Jaffar A.
Published: (2015)

Generation of bright-dark Q-switched pulse pair in thulium-doped fiber laser cavity with titanium aluminum carbide absorber
by: Omar S.; Musa B.; Rosol A.H.A.; Jusoh Z.; Yasin M.; Harun S.W.
Published: (2023)

Influence of steel fibres on friction behaviours with respect to speed, pressure and temperature
by: Jaafar T.R.; Ismail N.I.; Ismail M.F.; Othman E.A.
Published: (2017)

Effect of Gamma Radiation on Structural and Optical Properties of ZnO and Mg-Doped ZnO Films Paired with Monte Carlo Simulation
by: Duinong M.; Rasmidi R.; Chee F.P.; Moh P.Y.; Salleh S.; Mohd Salleh K.A.; Ibrahim S.
Published: (2022)

Synthesis, in vitro and Docking Studies of New Flavone Ethers as α-Glucosidase Inhibitors
by: Imran S.; Taha M.; Ismail N.H.; Kashif S.M.; Rahim F.; Jamil W.; Wahab H.; Khan K.M.
Published: (2016)

Study of characterization of bio foam composite material
by: Ismail M.; Mohd F.; Bahari A.R.
Published: (2016)

Effect of Fabrication Methods on the Magnetostriction of Magnetorheological Foams
by: Nordin N.A.; Nazri M.N.M.; Mazlan S.A.; Jais I.A.; Aziz S.A.A.; Ubaidillah; Hapipi N.M.
Published: (2024)

Investigating how amine structure influences drug-amine ion-pair formation and uptake via the polyamine transporter in A549 lung cells
by: Mohamed Sofian Z.; Harun N.; Mahat M.M.; Nor Hashim N.A.; Jones S.A.
Published: (2021)

Effect of green thickener and additive on friction and wear performance of palm ester bio-grease
by: Razak I.H.A.; Ahmad M.A.; Azizan M.A.
Published: (2024)

Tribological properties of graphite particles as an anti-friction and anti-wear additive in lithium soap grease
by: Kamis, et al.
Published: (2024)

Tribological properties of graphite particles as an anti-friction and anti-wear additive in lithium soap grease
by: Kamis S.L.; Yusoff B.I.; Fukuda K.; Tahir N.A.M.; Sukri I.A.A.; Ahmad M.A.
Published: (2024)

Temperature distribution in friction stir spot welding of aluminium alloy based on finite element analysis
by: Armansyah; Chie H.H.; Saedon J.; Adenan S.
Published: (2020)

Finite Element Analysis of Stress-Strain Response at the Tool Pin during Friction Stir Process
by: Jaffarullah M.S.; Busu N.; Low C.Y.; Saedon J.B.; Armansyah; Shaari M.S.B.; Jaffar A.
Published: (2015)

Design charts and equations of the frictional resistance of single pipe pile under static and seismic loads
by: Al-Jeznawi D.; Jais I.B.M.; Albusoda B.S.; Alzabeebee S.; Keawsawasvong S.; Khalid N.
Published: (2024)

Design and fabrication of aluminium foam tube for heat exchanger application
by: Lias I.; Nasir M.I.; Ismail M.H.; Mamat A.M.I.
Published: (2016)

Rapid remediation using polyurethane foam/resin grout in Malaysia
by: Jais I.B.M.
Published: (2017)

The effects of controlling parameters on polymer enhanced foam (PEF) stability
by: Azdarpour A.; Junin R.; Manan M.; Hamidi H.; Rafati R.
Published: (2015)

Effect of foaming agent in self consolidating lightweight concrete (Sclc)
by: Fauzi M.A.M.; Ridzuan A.R.M.; Sidek M.N.M.; Jasmi N.; Arshad M.F.; Harun M.S.
Published: (2019)

Effects of microwave on drug release property of poly(methyl vinyl ether-co-maleic acid) matrix
by: Wong T.W.; Wahab S.; Anthony Y.
Published: (2007)

Friction stir processed of 6061-t6 aluminum alloy reinforced with silica from rice husk ash
by: Zuhailawati H.; Halmy M.N.; Almanar I.P.; Dhindaw B.K.
Published: (2014)

Effect of tool shoulder diameters on surface quality of friction stir welded joints of aluminum alloy 6061
by: Maideen N.C.; Budin S.; Ibrahim D.; Shahrol Azlan A.
Published: (2020)

Influence of fly ash on the compressive strength of foamed concrete at elevated temperature
by: Ahmad H.; Wahid N.; Rahman M.F.A.; Karim N.A.
Published: (2014)

Aqueous foams stabilized with silica nanoparticle and alpha olefin sulfonates surfactant
by: Mohd T.A.T.; Abu Bakar N.F.; Awang N.; Talib A.A.
Published: (2018)

Synthesis, characterization, enzyme inhibition and molecular docking studies of benzothiazole derivatives bearing alkyl phenyl ether fragments
by: Usman M.; Alam A.; Zainab; Khan M.; Elhenawy A.A.; Ayaz M.; Alanazi M.M.; Latif A.; Shah S.A.A.; Ali M.; Ahmad M.
Published: (2025)

Adsorption and mechanism study for methyl orange dye by cross-linked chitosan-ethylene glycol diglycidyl ether beads
by: Jawad A.H.
Published: (2019)

Synthesis, characterization, enzyme inhibition and molecular docking studies of benzothiazole derivatives bearing alkyl phenyl ether fragments
by: Usman, et al.
Published: (2025)

Establishing unique relationship between minimum mobilised friction angle and axial strain for anisotropic soil settlement model
by: Mohamed Jais I.B.; Md. Noor M.J.
Published: (2010)

Feed-forward back-propagation (FFBP) algorithm for property prediction in friction stir spot welding of aluminium alloy
by: Armansyah; Chie H.H.; Saedon J.; Adenan S.
Published: (2020)

CONSOLIDATION INTEGRATED BUOYANCY EQUATION FOR SOFT GROUND IMPROVED WITH LIGHTWEIGHT POLYURETHANE FOAM
by: Lat D.C.; Jais I.B.M.; Ali N.; Yunus N.Z.M.; Norzarin N.H.W.; Zainuddin A.N.
Published: (2022)

Effect of Surface Roughness of Pistia Leaves Inspired Surfaces on Oil Contact Angle and Coefficient of Friction under Lubricated Condition
by: Latif N.A.; Othman N.E.; Kasolang S.; Hassan N.N.M.
Published: (2024)

Load level prediction system model of friction stir spot welded aluminium alloy using support vector machine
by: Armansyah; Astuti W.; Saedon J.; Ho H.-C.; Adenan S.
Published: (2018)