OPTIMIZATION EXPERIMENTAL STUDY OF MACHINING ENERGY CONSUMPTION OF ZIG-ZAG MILLING CUTTING PATH USING RSM

QR Code

OPTIMIZATION EXPERIMENTAL STUDY OF MACHINING ENERGY CONSUMPTION OF ZIG-ZAG MILLING CUTTING PATH USING RSM

Machining operations in CNC milling which remove the work material require power and energy to activate the machine components such as spindle motor, table and tool movement in order to withstand the high friction and load between tool and work material. Energy consumption during cutting operation i...

书目详细资料
发表在:	Jurnal Mekanikal
主要作者:	Ghazali A.R.; Hemdi A.R.; Osman K.; Mustapha G.; Noor R.M.; Zubair A.F.; Othman M.; Yahaya M.I.; Rodzi A.S.M.
格式:	文件
语言:	English
出版:	Penerbit UTM Press 2023
在线阅读:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85213322508&doi=10.11113%2fjm.v46.487&partnerID=40&md5=cf160fada2f5f5f61931e60573ddb8c0

相似书籍

Effect of cutting parameters on tool life during end milling of AISI 4340 under MQL condition
由: 2-s2.0-85122855909
出版: (2022)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
由: Isnin N.S.; Nasir S.M.F.S.A.; Hemdi A.R.; Ismail H.; Yusoff H.; Nurmalasari R.
出版: (2023)

Effects of Palm oil methyl ester (POME) on fuel consumption and exhaust emissions of diesel engine operating with blended fuel (Fossil fuel + Jatropha oil methyl ester (JOME))
由: Abdullah N.R.; Michael Z.; Asiah A.R.; Helmisyah A.J.; Buang S.
出版: (2015)

Autonomous Navigation Robot using Slam and Path Planning Based on a Single RP-LIDAR
由: Shamsudin A.U.; Sharif P.A.B.M.; Soomro Z.A.; Rahim R.A.; Faudzi A.A.M.; Zakaria W.N.W.; Peeie M.H.; Salaan C.J.
出版: (2025)

Development and validation of D-PATH website to improve hypertension management among hypertensive patients in Malaysia
由: Ab Hamid M.R.; Buhari S.S.; Noor H.M.; Azizan N.‘.; Malek K.A.; Mohd Asmawi U.M.; Nor N.M.
出版: (2024)

Enhancing Instant Fortified Rice Congee (IFRC) for Elderly Nutrition: Collagen and Curcumin Optimisation Using Response Surface Methodology (RSM)
由: Shaharom N.F.M.; Mutalib S.R.A.; Yusoff A.; Seow E.K.
出版: (2024)

Isolation and characterization of cellulose from sugarcane bagasse fiber (Saccharum officinarum) via delignification and mercerization treatment using response surface modeling (RSM)
由: Mubarak A.A.; Ilyas R.A.; Ngadi N.; Nordin A.H.; Alkbir M.F.M.
出版: (2024)

Enhanced Path Planning for Industrial Robot: Integrating Modified Artificial Potential Field and A* Algorithm
由: Rui F.; Ayub M.A.; Patar M.N.A.A.; Abdullah S.C.; Ruslan F.A.
出版: (2024)

The Properties of Hydroxyapatite Derived from Carbonate Eggshell Waste Through Ball Milling and Heat Treatment Method
由: Ghouse R.M.; Natasha A.N.; Shahedan N.F.; Ramesh S.; Bang L.T.
出版: (2024)

An overview of anaerobic treatment processes performance treating palm oil mill effluent (POME)-past, present and future
由: Mansor U.Q.A.; Yahya A.; Shafie N.F.A.; Roslan Q.I.; Manshor N.M.; Som A.M.; Nour A.H.; Hassan Z.; Yunus R.M.
出版: (2017)

Bibliometric-based visual analysis of sustainable consumption (2004-2024)
由: Ou W.; Shariff S.M.; Tajuddin R.B.M.
出版: (2024)

Performance Analysis of Log-Space Harmonic Potentials for Path Planning in Indoor Environment
由: Tamsin N.W.D.; Sulaiman J.; Saudi A.; Sunarto A.
出版: (2024)

An overview of autonomous mobile robot path planning algorithms
由: 2-s2.0-46849099615
出版: (2006)

The Embodiment of Philosophy in Traditional Chinese Color Paper-Cutting Art
由: 2-s2.0-85208966089
出版: (2025)

Performance Analysis of Cutting Glass Fibre Epoxy Reinforced Composites Using an Abrasive Water Jet Machining Process
由: Tharazi I.; Rahaman W.E.W.A.; Sarizam M.I.E.
出版: (2024)

Factorial Design for Optimization and Performance Evaluation of Palm Oil Mill Effluent (POME) using Electrocoagulation
由: Kasmuri N.; Kasim Z.; Aziz A.A.; Ismail N.A.; Zait M.S.A.
出版: (2023)

Development of Enhanced Stress Prediction Models for Fixed Traffic Loads on Flexible Pavements Based on Response Surface Methodology (RSM) and Machine Learning (ML) Techniques
由: Alnadish A.M.; Bangalore Ramu M.; Baarimah A.O.; Alawag A.M.
出版: (2025)

MECHANISM OF MEMBRANE FOULING IN HYBRID MEMBRANE PHOTOCATALYTIC REACTOR FOR PALM OIL MILL SECONDARY EFFLUENT TREATMENT
由: Hawari Y.; Ngatiman M.; Mohamed Halim R.; Sharudin H.; Abd Kadir H.
出版: (2023)

Compressive failure behaviour of glass epoxy and graphite epoxy composite laminates due to the effects of different cut-out sizes and variations in fibre orientation
由: Azmi N.N.; Shahrum M.A.M.; Redzuan A.N.A.; Mahmud J.
出版: (2021)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
由: Azhar, et al.
出版: (2024)

ASSESSMENT OF TOOL NOSE WEAR USING SCANNED IMAGES OF CUTTING INSERTS
由: Lim T.Y.; Chiang E.P.; Woo Y.P.
出版: (2024)

Impact of Nodes on Energy Consumption of IoT Devices
由: Yusof Y.W.M.; Kassim M.; Azmi N.H.; Ismail M.N.
出版: (2024)

Molecular weight cut-off and structural analysis of vacuum-assisted titania membranes for water processing
由: Jalil S.N.A.; Wang D.K.; Yacou C.; Motuzas J.; Smart S.; da Costa J.C.D.
出版: (2016)

Religion and Halal consumption
由: 2-s2.0-85041997660
出版: (2017)

Path Exploration of Generative Artificial Intelligence Enabling the Construction of Civic Education in Primary and Secondary Schools
由: Zhang Q.; Luo Y.; Ren W.; Mohamad S.N.A.; Shi J.; Ning H.
出版: (2024)

A Deep Study on Machining of Titanium Superalloys and its Cutting Tool Materials
由: 2-s2.0-85206853520
出版: (2024)

Educational Building's Energy Consumption Independent Variables Analysis using Linear Regression Model: A Comparative Study
由: Mustapa R.F.; Hamizah Mohd Nordin A.; Hairuddin M.A.; Suhaifiza W Ibrahim W.; Mohd Saleh S.A.; Dahlan N.Y.; Yassin I.M.
出版: (2023)

Towards Sustainable City: A Covering Model for Recycling Facility Location-allocation in Nilai, Malaysia
由: Zaharudin Z.A.; Shuib A.; Hadianti R.; Rodzi Z.M.
出版: (2023)

Assessment of Heavy Metal Concentrations in Penang, Malaysia’s Wastewater Treatment Plants: A Wastewater-Based Epidemiology Approach
由: Ruzi I.I.; Ishak A.R.; Abdullah M.A.; Zain N.N.M.; Tualeka A.R.; Aziz M.Y.
出版: (2023)

A PATH ANALYSIS OF THE HEALTHCARE UTILIZATION AND SERVICES SATISFACTION AMONG COMMUNITY-DWELLING INDIVIDUALS WITH SPINAL CORD INJURY IN MALAYSIA
由: Zainudin, et al.
出版: (2025)

ROS-based SLAM and Path Planning for Autonomous Unmanned Surface Vehicle Navigation System
由: 2-s2.0-85141645222
出版: (2022)

Finding shortest path of the ambulance routing: Interface of A algorithm using C# programming
由: 2-s2.0-84867911504
出版: (2012)

Optimization using RSM-CCD in the fabrication of magnesium-doped bismuth ferrite nanoparticles via sol–gel auto-combustion method for enhanced photocatalytic performance
由: Sulaiman N.F.; Mubin M.H.A.; Gunasekaran S.S.; Sofiah A.G.N.; Chaudhary K.T.; Mohamad S.N.; Ali J.
出版: (2025)

A computational fluid dynamics analysis of cryo-CO2 flow and thermal behaviour in high-speed milling process
由: Mohamad Fauzee N.F.; Abdul Halim N.H.; Solihin Z.H.; Tharazi I.; Zakaria I.A.; Hadi M.A.
出版: (2025)

Recycled polyethylene terephthalate (PET) and rubber crumb as replacement to fine aggregate
由: Norhana A.R.; Kartini K.; Hamidah M.S.
出版: (2016)

Mitigating the Structural Governing Challenges for Waqf LandDevelopment in Malaysia Through Special Property Development Entity (SPDE)
由: Azmi A.S.M.; Hanif N.R.; Mahamood S.M.
出版: (2022)

Removal of phosphate by paper mill sludge: Adsorption isotherm and kinetic study
由: 2-s2.0-84904277598
出版: (2014)

Estimation of aerosol optical depth over ocean: Intercept technique
由: Mat Amin A.R.; Abdullah K.; Rivaie M.
出版: (2011)

Development of Costing Model for Butt Joint Process using Mild Steel with Robotic GMAW: A Malaysian Context
由: Ramlan A.R.; Kassim K.; Manurung Y.H.P.; Prajadhiana K.P.; Adenan M.S.; Mat M.F.; Busari Y.O.; Rahman A.R.A.; Ghazali S.N.M.
出版: (2024)

Optimization Consumption Power in Internet of Things Technology: A Systematic Review
由: Salleh N.Y.; Yusof M.K.; Mansor N.F.
出版: (2025)