THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS

QRコード

THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS

Plastic 3D printing is currently in-trend for producing custom parts and products with intricate geometry. Fused Filament Fabrication (FFF) is one of the preferred technologies, as it requires a simple operation with affordable equipment setup. Previous studies have achieved many breakthroughs in us...

書誌詳細
出版年:	Jurnal Mekanikal
第一著者:	Maideen N.C.; Nazri M.H.; Budin S.; Hyie K.M.; Yusoff H.; Sahudin S.
フォーマット:	論文
言語:	English
出版事項:	Penerbit UTM Press 2023
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85213397400&doi=10.11113%2fjm.v46.490&partnerID=40&md5=7da419153f885da52a178ed1756ec1c7

類似資料

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
著者:: 2-s2.0-85166774849
出版事項: (2023)

Development of Real-Time Quality Feedback System Using Web-Based Software for an Automotive Parts Factory
著者:: Rusli M.H.M.; Kayat S.B.; Sohaimi M.A.T.B.M.; Hassan M.K.B.
出版事項: (2024)

Influence of Drying Temperature in the Oven on Physical, Morphology and Mechanical Properties of Mycelium Composite
著者:: Farrahnoor A.; Hishamuddini A.D.N.; Yusoff H.; Hyie K.M.; Maideen N.C.; Fohimi N.A.M.; Zhou B.T.
出版事項: (2025)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
著者:: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
出版事項: (2023)

Resource-Efficient 64-bit Karatsuba Multiplier using LUTs and DSP slices
著者:: Hashim, 等
出版事項: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
著者:: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
出版事項: (2024)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
著者:: 2-s2.0-85189024462
出版事項: (2024)

Enhancing 3D Printed Bed-Resting Ankle-Foot Orthosis Design through Topology Optimization
著者:: Ab Rashid A.M.; Mukhainizam A.H.D.; Rashid H.; Ramlee M.H.; Pangesty A.I.; Abdullah A.H.
出版事項: (2024)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
著者:: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
出版事項: (2022)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
著者:: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
出版事項: (2025)

A Study of 3D Printed Box Structure
著者:: 2-s2.0-85104174597
出版事項: (2021)

Development and future prospects of 3D printed surimi products: A review
著者:: Diao D.; Yang R.; Liu Y.; Zhao Y.; Chen M.; Chen Y.; Zheng B.; Khong H.Y.
出版事項: (2025)

Development of Ophthalmology Eye Examination Device using 3D Printing Technology
著者:: Abdullah A.H.; Alimarizan F.; Aziz N.A.A.; Hazwani F.; Marwan S.H.
出版事項: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
著者:: Shahar, 等
出版事項: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
著者:: 2-s2.0-85215705046
出版事項: (2025)

Effects of Infill Density, Wall Perimeter and Layer Height in Fabricating 3D Printing Products
著者:: Mazlan M.A.; Anas M.A.; Nor Izmin N.A.; Abdullah A.H.
出版事項: (2023)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
著者:: 2-s2.0-85122086227
出版事項: (2022)

Fault Tolerance Mechanism for Software Application Through Fog Computing as Middleware
著者:: Naim M.H.; Zain J.M.; Jalil K.A.
出版事項: (2022)

Development and future prospects of 3D printed surimi products: A review
著者:: Diao, 等
出版事項: (2025)

Plant oil body as an effective improver for surimi-based 3D printing
著者:: 2-s2.0-85204039180
出版事項: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
著者:: Adawiyah Zulkefli S.; Syamimi Ismail N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版事項: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
著者:: 2-s2.0-85213306488
出版事項: (2024)

Graph Based Method for Lathe Machining Part Model
著者:: 2-s2.0-85098853540
出版事項: (2020)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
著者:: ATAN M.K.F.M.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; GUNAWAN T.S.; ZAIN Z.M.
出版事項: (2025)

Motives of taking part in malay silat, karate-do and taekwondo
著者:: 2-s2.0-84938690651
出版事項: (2015)

Axle overloading at the southern part of the North-South Expressway in Malaysia
著者:: 2-s2.0-84864223304
出版事項: (2012)

A comprehensive review on recent biological innovations to improve biogas production, Part 1: Upstream strategies
著者:: Tabatabaei M.; Aghbashlo M.; Valijanian E.; Kazemi Shariat Panahi H.; Nizami A.-S.; Ghanavati H.; Sulaiman A.; Mirmohamadsadeghi S.; Karimi K.
出版事項: (2020)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
著者:: 2-s2.0-85132112562
出版事項: (2022)

DEVELOPMENT AND CHARACTERISATION OF PANTOGRAPH SLIDES FOR RAILWAY APPLICATIONS: A SHORT REVIEW
著者:: Fadzil F.M.; Hyie K.M.; Selamat M.A.
出版事項: (2023)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
著者:: Atan, 等
出版事項: (2025)

Development of software for collecting cleft-specific data in Malaysia
著者:: Shahrul, 等
出版事項: (2025)

Development of software for collecting cleft-specific data in Malaysia
著者:: 2-s2.0-86000111806
出版事項: (2025)

Theoretical perspectives of the HCD integration in software development process
著者:: 2-s2.0-85073876714
出版事項: (2019)

Biomechanical Evaluation of Three Dimensionally Printed Passive Transfemoral Leg Socket Compliance with ISO 10328: A Comparison of Two Different Designs
著者:: Tihani Nazemi N.; Muhammad Shahril A.Z.; Hanif Baharuddin M.; Izzudin Abd Samad M.; Olsen J.; Goh K.-L.; Swain S.; Halim Abdullah A.; Ikhwan Jamaluddin M.; Hanif Ramlee M.
出版事項: (2024)

Application of the Technology- Organization- Environment Framework on Big Data Analytics Deployment in Manufacturing and Service
著者:: Urus, 等
出版事項: (2024)

Analysing smart home security using packet tracer simulation software
著者:: Abdul Aziz N.N.; Anak Rechie R.M.; Mohd Bakry B.B.; Rahman R.A.B.; Yussoff Y.M.
出版事項: (2021)

Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system
著者:: Ismail M.H.; Sidambe A.T.; Figueroa I.A.; Davies H.A.; Todd I.
出版事項: (2010)

Ergonomics as a lean manufacturing tool for improvements in a manufacturing company
著者:: 2-s2.0-85018440148
出版事項: (2016)

Study on antioxidant capacity and phenolic content of various parts of wax gourd (Benincasa hispida)
著者:: 2-s2.0-84867686700
出版事項: (2012)

Mapping Study of Critical Success Factor for Agile Software Project
著者:: 2-s2.0-85148458474
出版事項: (2022)