THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS

QR رمز

THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS

Plastic 3D printing is currently in-trend for producing custom parts and products with intricate geometry. Fused Filament Fabrication (FFF) is one of the preferred technologies, as it requires a simple operation with affordable equipment setup. Previous studies have achieved many breakthroughs in us...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	Jurnal Mekanikal
المؤلف الرئيسي:	Maideen N.C.; Nazri M.H.; Budin S.; Hyie K.M.; Yusoff H.; Sahudin S.
التنسيق:	مقال
اللغة:	English
منشور في:	Penerbit UTM Press 2023
الوصول للمادة أونلاين:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85213397400&doi=10.11113%2fjm.v46.490&partnerID=40&md5=7da419153f885da52a178ed1756ec1c7

مواد مشابهة

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
بواسطة: 2-s2.0-85166774849
منشور في: (2023)

Development of Real-Time Quality Feedback System Using Web-Based Software for an Automotive Parts Factory
بواسطة: Rusli M.H.M.; Kayat S.B.; Sohaimi M.A.T.B.M.; Hassan M.K.B.
منشور في: (2024)

Influence of Drying Temperature in the Oven on Physical, Morphology and Mechanical Properties of Mycelium Composite
بواسطة: Farrahnoor A.; Hishamuddini A.D.N.; Yusoff H.; Hyie K.M.; Maideen N.C.; Fohimi N.A.M.; Zhou B.T.
منشور في: (2025)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
بواسطة: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
منشور في: (2023)

Resource-Efficient 64-bit Karatsuba Multiplier using LUTs and DSP slices
بواسطة: Hashim, وآخرون
منشور في: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
بواسطة: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
منشور في: (2024)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
بواسطة: 2-s2.0-85189024462
منشور في: (2024)

Enhancing 3D Printed Bed-Resting Ankle-Foot Orthosis Design through Topology Optimization
بواسطة: Ab Rashid A.M.; Mukhainizam A.H.D.; Rashid H.; Ramlee M.H.; Pangesty A.I.; Abdullah A.H.
منشور في: (2024)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
بواسطة: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
منشور في: (2022)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
بواسطة: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
منشور في: (2025)

A Study of 3D Printed Box Structure
بواسطة: 2-s2.0-85104174597
منشور في: (2021)

Development and future prospects of 3D printed surimi products: A review
بواسطة: Diao D.; Yang R.; Liu Y.; Zhao Y.; Chen M.; Chen Y.; Zheng B.; Khong H.Y.
منشور في: (2025)

Development of Ophthalmology Eye Examination Device using 3D Printing Technology
بواسطة: Abdullah A.H.; Alimarizan F.; Aziz N.A.A.; Hazwani F.; Marwan S.H.
منشور في: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
بواسطة: Shahar, وآخرون
منشور في: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
بواسطة: 2-s2.0-85215705046
منشور في: (2025)

Effects of Infill Density, Wall Perimeter and Layer Height in Fabricating 3D Printing Products
بواسطة: Mazlan M.A.; Anas M.A.; Nor Izmin N.A.; Abdullah A.H.
منشور في: (2023)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
بواسطة: 2-s2.0-85122086227
منشور في: (2022)

Fault Tolerance Mechanism for Software Application Through Fog Computing as Middleware
بواسطة: Naim M.H.; Zain J.M.; Jalil K.A.
منشور في: (2022)

Development and future prospects of 3D printed surimi products: A review
بواسطة: Diao, وآخرون
منشور في: (2025)

Plant oil body as an effective improver for surimi-based 3D printing
بواسطة: 2-s2.0-85204039180
منشور في: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
بواسطة: Adawiyah Zulkefli S.; Syamimi Ismail N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
منشور في: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
بواسطة: 2-s2.0-85213306488
منشور في: (2024)

Graph Based Method for Lathe Machining Part Model
بواسطة: 2-s2.0-85098853540
منشور في: (2020)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
بواسطة: ATAN M.K.F.M.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; GUNAWAN T.S.; ZAIN Z.M.
منشور في: (2025)

Motives of taking part in malay silat, karate-do and taekwondo
بواسطة: 2-s2.0-84938690651
منشور في: (2015)

Axle overloading at the southern part of the North-South Expressway in Malaysia
بواسطة: 2-s2.0-84864223304
منشور في: (2012)

A comprehensive review on recent biological innovations to improve biogas production, Part 1: Upstream strategies
بواسطة: Tabatabaei M.; Aghbashlo M.; Valijanian E.; Kazemi Shariat Panahi H.; Nizami A.-S.; Ghanavati H.; Sulaiman A.; Mirmohamadsadeghi S.; Karimi K.
منشور في: (2020)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
بواسطة: 2-s2.0-85132112562
منشور في: (2022)

DEVELOPMENT AND CHARACTERISATION OF PANTOGRAPH SLIDES FOR RAILWAY APPLICATIONS: A SHORT REVIEW
بواسطة: Fadzil F.M.; Hyie K.M.; Selamat M.A.
منشور في: (2023)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
بواسطة: Atan, وآخرون
منشور في: (2025)

Development of software for collecting cleft-specific data in Malaysia
بواسطة: Shahrul, وآخرون
منشور في: (2025)

Development of software for collecting cleft-specific data in Malaysia
بواسطة: 2-s2.0-86000111806
منشور في: (2025)

Theoretical perspectives of the HCD integration in software development process
بواسطة: 2-s2.0-85073876714
منشور في: (2019)

Biomechanical Evaluation of Three Dimensionally Printed Passive Transfemoral Leg Socket Compliance with ISO 10328: A Comparison of Two Different Designs
بواسطة: Tihani Nazemi N.; Muhammad Shahril A.Z.; Hanif Baharuddin M.; Izzudin Abd Samad M.; Olsen J.; Goh K.-L.; Swain S.; Halim Abdullah A.; Ikhwan Jamaluddin M.; Hanif Ramlee M.
منشور في: (2024)

Application of the Technology- Organization- Environment Framework on Big Data Analytics Deployment in Manufacturing and Service
بواسطة: Urus, وآخرون
منشور في: (2024)

Analysing smart home security using packet tracer simulation software
بواسطة: Abdul Aziz N.N.; Anak Rechie R.M.; Mohd Bakry B.B.; Rahman R.A.B.; Yussoff Y.M.
منشور في: (2021)

Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system
بواسطة: Ismail M.H.; Sidambe A.T.; Figueroa I.A.; Davies H.A.; Todd I.
منشور في: (2010)

Ergonomics as a lean manufacturing tool for improvements in a manufacturing company
بواسطة: 2-s2.0-85018440148
منشور في: (2016)

Study on antioxidant capacity and phenolic content of various parts of wax gourd (Benincasa hispida)
بواسطة: 2-s2.0-84867686700
منشور في: (2012)

Mapping Study of Critical Success Factor for Agile Software Project
بواسطة: 2-s2.0-85148458474
منشور في: (2022)