Influence of Low-Density Polyethylene as Sand Replacement and Steel Fibre as An Additive on Physical and Strength Properties of Concrete

One of the significant by products of Malaysia's industrial sector is the generation of solid waste that does not biodegrade. Coir, along with other by products of industrialisation such as plastic bags, PET bottles, and pulverised waste LDPE, must be disposed of in an appropriate manner. Utili...

全面介紹

書目詳細資料
發表在:Journal of Advanced Research in Applied Mechanics
主要作者: Tuan Lokman T.N.L.; Yee H.M.; Ahmad Zailani W.W.; Senin S.F.; Chong C.H.; Kim J.Y.
格式: Article
語言:English
出版: Semarak Ilmu Publishing 2025
在線閱讀:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85215127517&doi=10.37934%2faram.131.1.212232&partnerID=40&md5=452ce1ec69f8340db8ee88ffdea3a8bd
實物特徵
總結:One of the significant by products of Malaysia's industrial sector is the generation of solid waste that does not biodegrade. Coir, along with other by products of industrialisation such as plastic bags, PET bottles, and pulverised waste LDPE, must be disposed of in an appropriate manner. Utilising discarded items contributes to pollution prevention and resource conservation. A few researchers have investigated the possibility of recycling waste materials to lessen pollution and preserve important resources. An experiment revealed that replacing fine particles (sand) with low-density polyethylene (LDPE) negatively affects the compressive strength of concrete cement. To solve this issue, steel fibre was included as an additional component after it was applied. This study investigated a variety of ratios of LDPE substitution for fine aggregates. These ratios ranged from 0% to 15%, with increments of 5%. Following 7, 14, and 28 days, the density, compressive strength, and flexural strength of the concrete were measured and analysed. The findings showed that adding 15% LDPE to concrete cement made it less dense (1840 kg/m3) and weaker in its compressive strength (32.87 MPa) and flexural strength (4.627 MPa) at 28 days. Based on this, it has been determined that a combination consisting of a 5% substitution of LDPE and an additional 2% of steel fibre is the most effective combination for further research endeavours. © 2025, Semarak Ilmu Publishing. All rights reserved.
ISSN:22897895
DOI:10.37934/aram.131.1.212232