Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C

QRコード

Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C

The purpose of this project is to study the encouragement of three machining parameters on wire electrical discharge machining that consist of peak current (IP), pulse OFF time (OFF) and wire tension (WT) to three machining responses which are cutting rate (CR), material removal rate (MRR) and surfa...

書誌詳細
出版年:	Jurnal Teknologi
第一著者:	2-s2.0-84943270190
フォーマット:	論文
言語:	English
出版事項:	Penerbit UTM Press 2015
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84943270190&doi=10.11113%2fjt.v76.5701&partnerID=40&md5=55f5c149a81e271afaa0b88b6531f3f0

類似資料

Multi-objective optimization in wire-electrical discharge machining (WEDM) of titanium alloy
著者:: Saedon J.B.; Jaafar N.; Nor N.H.M.; Yahaya M.A.; Husain H.
出版事項: (2015)

Influence of machine feed rate in WEDM of Titanium Ti-6Al-4V with constant current (6A) using brass wire
著者:: 2-s2.0-84901048392
出版事項: (2012)

A review on current research trends in electrical discharge machining (EDM)
著者:: 2-s2.0-33947193401
出版事項: (2007)

Investigation of Tensile Test on Back-to-Back Web Connection of Cold-Formed Steel C-Section
著者:: Muhammad Alif I.R.; Kamarudin A.F.; Seyed Hakim S.J.; Musa M.K.; Hamid S.; Mohammadhasani M.; Rathomy Romeli M.A.
出版事項: (2024)

Investigation of Tensile Test on Back-to-Back Web Connection of Cold-Formed Steel C-Section
著者:: 2-s2.0-85200314989
出版事項: (2024)

Investigation of failure analysis on fatigue crack initiation influenced by critical resolved shear stress in X10CrMoVNb9-1 steel
著者:: Abd Rahim, 等
出版事項: (2024)

Mode-locked erbium-doped fiber laser based on Cr2GaC saturable absorber
著者:: 2-s2.0-85195815563
出版事項: (2024)

Structural, optical and electrical properties of ZnO/Zn 2 GeO 4 porous-like thin film and wires
著者:: 2-s2.0-79951682791
出版事項: (2011)

Experimental Analysis of Cold-Formed Steel C-Sections with the Notch Subjected to Axial Compression
著者:: Sani M.S.H.M.; Muftah F.; Tan C.S.
出版事項: (2020)

FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES
著者:: 2-s2.0-85149545468
出版事項: (2022)

Effect of Cr3+ substitution at Mn-site on electrical and magnetic properties of charge ordered Bi0.3Pr0.3Ca0.4MnO3 manganites
著者:: 2-s2.0-85047261330
出版事項: (2018)

Investigating the Effect of Electric Vehicle (EV) in the Protection Distribution System
著者:: 2-s2.0-85219539997
出版事項: (2024)

Investigating and Modeling Ageing Effects on Polymeric Insulator Electrical Properties
著者:: 2-s2.0-85165909376
出版事項: (2023)

Microstructure and microhardness properties of Fe-Cr-Al2O 3 composites
著者:: 2-s2.0-78049499296
出版事項: (2010)

Research challenges, quality control and monitoring strategy for Wire Arc Additive Manufacturing
著者:: 2-s2.0-85151789154
出版事項: (2023)

Performance evaluation of high discharge estuarine hydrodynamic model
著者:: Salleh, 等
出版事項: (2025)

Performance evaluation of high discharge estuarine hydrodynamic model
著者:: 2-s2.0-85219135938
出版事項: (2025)

Partial Discharges Identification and Localisation within Transformer Windings
著者:: 2-s2.0-85097998275
出版事項: (2020)

Numerical Investigation of the Failure of Stiffened Steel Plates Subjected to Near-Field Blast Loads
著者:: Razak N.S.A.; Alias A.; Mohsan N.M.; Masjuki S.A.
出版事項: (2023)

Reinforced concrete slab with added steel fibers for engineering application: Preliminary experimental investigations
著者:: 2-s2.0-85115439629
出版事項: (2021)

Simulation and experiment of 50% calcium oxide-sand mixture in a bubbling fluidized bed CO2 absorption reactor
著者:: 2-s2.0-84956989213
出版事項: (2014)

New phase of lead chalcogenide alloy: Ternary alloy PbSrSe2 for future thermoelectric application
著者:: 2-s2.0-85129367580
出版事項: (2022)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
著者:: 2-s2.0-84971469649
出版事項: (2016)

Stand structure, biomass estimation and population dynamics of Rhizophoraceae in 50-ha plot at Pasoh Forest Reserve, Negeri Sembilan, Malaysia
著者:: Fitri A.Z.; Hafiz M.M.A.; Hazlan N.N.H.; Norafida N.N.A.; Norilani W.W.I.; Latiff A.
出版事項: (2023)

Stand structure, biomass estimation and population dynamics of Rhizophoraceae in 50-ha plot at Pasoh Forest Reserve, Negeri Sembilan, Malaysia
著者:: 2-s2.0-85215869558
出版事項: (2023)

XPS and DFT investigations of corrosion inhibition of substituted benzylidene Schiff bases on mild steel in hydrochloric acid
著者:: 2-s2.0-85060555005
出版事項: (2019)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
著者:: Mohd Mansor M.S.; Raja S.; Yusof F.; Muhamad M.R.; Manurung Y.H.; Adenan M.S.; Hussein N.I.S.; Ren J.
出版事項: (2024)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
著者:: 2-s2.0-85189668193
出版事項: (2024)

Indoor flow datasets of two-layered cross-ventilation models by particle image velocimetry and hot wire anemometry
著者:: 2-s2.0-85178589629
出版事項: (2024)

Anodic oxidation of Zr-5Fe alloy in ethylene glycol/fluoride electrolyte for Cr(VI) removal under sunlight
著者:: Jelaini F.J.; Bashirom N.; Fauzi N.H.N.C.; Isa N.
出版事項: (2024)

Impact of microstructure morphology on fatigue crack initiation in 9Cr-1Mo (P91) through numerical simulation
著者:: 2-s2.0-85195538700
出版事項: (2024)

Backwater Effect of Tidal Water Level Fluctuation and Riverine Discharge in An Idealized River
著者:: 2-s2.0-85086903427
出版事項: (2020)

Missing River Discharge Data Imputation Approach using Artificial Neural Network
著者:: 2-s2.0-85101170010
出版事項: (2015)

CL-SR: Boosting Imbalanced Image Classification with Contrastive Learning and Synthetic Minority Oversampling Technique Based on Rough Set Theory Integration
著者:: Gao X.; Jamil N.; Ramli M.I.
出版事項: (2024)

Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications
著者:: 2-s2.0-84863725211
出版事項: (2012)

Synthesis and single-molecule imaging reveal stereospecific enhancement of binding kinetics by the antitumour eEF1A antagonist SR-A3
著者:: 2-s2.0-85138252320
出版事項: (2022)

Structural, electronic and optical studies of Sr2NiTeO6 double perovskite by first-principle DFT–LDA + U calculation
著者:: 2-s2.0-85128275541
出版事項: (2022)

Activated Carbon–Modified Iron Oxide Nanoparticles for Cr(VI) Removal: Optimization, Kinetics, Isotherms, Thermodynamics, Regeneration, and Mechanism Study
著者:: Sahu U.K.; Tripathy S.; Gouda N.; Mohanty H.S.; Sahu M.K.; Panda S.P.; Krishna Y.M.; Samantaray S.; Kumar V.S.R.; Banu N.; Acharya S.; Jawad A.H.
出版事項: (2023)

Effect of inlet slot number on the spray cone angle and discharge coefficient of swirl atomizer
著者:: 2-s2.0-84901023970
出版事項: (2012)

Palladium Complexes Derived from Waste as Catalysts for C-H Functionalisation and C-N Bond Formation
著者:: Jantan K.A.; Ekart G.; McCarthy S.; White A.J.P.; Braddock D.C.; Serpe A.; Wilton-Ely J.D.E.T.
出版事項: (2024)