Design concept and mathematical model of a bi-fluid photovoltaic/thermal (PV/T) solar collector

QR Code

Design concept and mathematical model of a bi-fluid photovoltaic/thermal (PV/T) solar collector

This paper presents an improved design of a photovoltaic/thermal (PV/T) solar collector integrating a PV panel with a serpentine-shaped copper tube as the water heating component and a single pass air channel as the air heating component. In addition to the electricity generated, this type of collec...

Full description

Bibliographic Details
Published in:	Renewable Energy
Main Author:	2-s2.0-84897371825
Format:	Article
Language:	English
Published:	Elsevier BV 2014
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84897371825&doi=10.1016%2fj.renene.2013.11.052&partnerID=40&md5=90684f15addaa6810073126146fa63b9

Similar Items

Performance analysis and parametric studies of a bi-fluid type photovoltaic/thermal (PV/T) solar collector in simultaneous mode under tropical climate conditions
by: Jarimi H.; Bakar M.N.A.; Othman M.; Din M.
Published: (2017)

Enhanced Load Forecasting Using CNN-BiLSTM Models in University Buildings with Solar PV
by: Ahmad M.Z.; Dahlan N.Y.; Yasin Z.M.
Published: (2024)

HARDWARE DESIGN FOR MAXIMUM POWER POINT TRACKING (MPPT) BASED ON METAHEURISTIC ALGORITHM IN PHOTOVOLTAIC (PV) SYSTEMS
by: Darjat; Bima S.A.; Evangelista H.E.; Winardi B.; Zahra A.A.; Tahir N.M.
Published: (2024)

Design and Analysis of an Optimized Proportional-Integral-Derivative (PID) Controller for Photovoltaic (PV) Based Microgrid in Power System
by: Mohd Salleh N.A.; Hannoon N.M.S.; Baharom R.
Published: (2024)

Recent progress on concentrating direct absorption solar collector using nanofluids: A review
by: 2-s2.0-85059522717
Published: (2019)

Data driven insights for parabolic trough solar collectors: Artificial intelligence-based energy and exergy performance analysis
by: 2-s2.0-85184994418
Published: (2024)

Mathematical Modelling of Vehicle Rear End Design Using The Polynomial Response Surface Method (PRSM)
by: Venkatason K.; Cornell W.; Sivaguru S.
Published: (2024)

Mathematical Modelling of Vehicle Rear End Design Using The Polynomial Response Surface Method (PRSM)
by: Venkatason, et al.
Published: (2024)

Modelling and simulation of photovoltaic solar cell using silvaco TCAD and matlab software
by: 2-s2.0-85056276428
Published: (2018)

PALS in mathematics classroom
by: 2-s2.0-84904599534
Published: (2014)

Design and Economic as Entrepreneurial Model Concepts for Emerging Studio-Ceramic Practitioners
by: Malek M.F.K.A.; Anwar R.; Hashim H.Z.
Published: (2024)

Thermal analysis: Basic concept of differential scanning calorimetry and thermogravimetry for beginners
by: 2-s2.0-85118298094
Published: (2021)

Cybersecurity Vulnerabilities in Smart Grids with Solar Photovoltaic: A Threat Modelling and Risk Assessment Approach
by: 2-s2.0-85184894473
Published: (2023)

Effect of Spinning Rate on the Performance of Multilayer Bi-perovskite Solar Cells
by: 2-s2.0-85126150163
Published: (2021)

Investigation Towards the Needs of Affective Design Principles of Mathematics Mobile Application for Low Vision Learners
by: 2-s2.0-85123437883
Published: (2021)

Review of Deep Learning-Based Hotspot Detection in Solar Photovoltaic Arrays
by: 2-s2.0-85191698409
Published: (2024)

Solar photovoltaic architecture and agronomic management in agrivoltaic system: A review
by: 2-s2.0-85111134317
Published: (2021)

Solar photovoltaic architecture and agronomic management in agrivoltaic system: A review
by: Abidin M.A.Z.; Mahyuddin M.N.; Zainuri M.A.A.M.
Published: (2021)

Solar power prediction based on Artificial Neural Network guided by feature selection for Large-scale Solar Photovoltaic Plant
by: 2-s2.0-85173601977
Published: (2023)

Heat Transfer in Hartmann Flow of Hybrid Nano-Jeffrey Fluid with Heat Absorption and Thermal Radiation Impact
by: 2-s2.0-85184685034
Published: (2023)

THE FIQH MAXIM AL-GHUNM BI AL-GHURM: A CRITIQUE ON INTERPRETATION OF THE MAXIM RELATING TO THE RISK-RETURN CONCEPT IN ISLAMIC BANKING AND FINANCE
by: Ghazali N.M.; Sawari M.F.M.; Ghalia B.; Alhabshi S.M.S.J.
Published: (2024)

Energy and cost management of different mixing ratios and morphologies on mono and hybrid nanofluids in collector technologies
by: 2-s2.0-85148618981
Published: (2023)

Adaptive photovoltaic solar module based on internet of things and web-based monitoring system
by: Kassim M.; Lazim F.
Published: (2022)

Mathematical modeling of plastic injection molding parameters to study the product quality through mechanical property evaluation
by: Venkatason K.; Sivaguru S.; Paizar A.R.; Roseley N.R.N.
Published: (2023)

Energy and cost management of different mixing ratios and morphologies on mono and hybrid nanofluids in collector technologies
by: Tao H.; Aldlemy M.S.; Alawi O.A.; Kamar H.M.; Homod R.Z.; Mohammed H.A.; K. A. Mohammed M.; Mallah A.R.; Al-Ansari N.; Yaseen Z.M.
Published: (2023)

Cell Temperature Determination based on IEC61215: Solar Photovoltaic Experimental Study of Tropical Malaysia
by: Zainuddin H.; Hanifah M.M.M.; Hussin M.Z.; Muhammad N.
Published: (2024)

MathLexic: An assistive multimedia mathematical learning aid for dyslexia children
by: 2-s2.0-84883096645
Published: (2013)

Prospect of solar thermal integration for multiple processes in oleochemical and poultry industries
by: 2-s2.0-85092062905
Published: (2020)

A computational fluid dynamics analysis of cryo-CO2 flow and thermal behaviour in high-speed milling process
by: Mohamad Fauzee N.F.; Abdul Halim N.H.; Solihin Z.H.; Tharazi I.; Zakaria I.A.; Hadi M.A.
Published: (2025)

A computational fluid dynamics analysis of cryo-CO2 flow and thermal behaviour in high-speed milling process
by: Fauzee, et al.
Published: (2025)

Annealing Time Dependence in the Fabrication of Bismuth-based Perovskite Solar Cells (Bi-PeSCs) by the Hot Immersion Method
by: 2-s2.0-85188174612
Published: (2024)

Enhancement of mixing and reaction efficiency of various fluids applications at different microfluidic configuration and design
by: 2-s2.0-85186953716
Published: (2024)

Mathematical modelling of canola oil biodegradation and optimisation of biosurfactant production by an antarctic bacterial consortium using response surface methodology
by: Zahri K.N.M.; Khalil K.A.; Gomez-Fuentes C.; Zulkharnain A.; Sabri S.; Convey P.; Lim S.; Ahmad S.A.
Published: (2021)

Comparative analysis of ‘La’ modified BiFeO3-based perovskite solar cell devices for high conversion efficiency
by: 2-s2.0-85142431856
Published: (2023)

How Fluid Particle Interaction Affects the Flow of Dusty Williamson Fluid
by: Mohd Kasim A.R.; Arifin N.S.; Mohd Zokri S.; Ariffin N.A.N.; Shafie S.
Published: (2023)

Thermal Conductivity of Al2O3 Nanofluid Utilizing Cross- linked Polyacrylic Acid (PAA) as the Base Fluid: An Experimental Study
by: Fauzi, et al.
Published: (2025)

A NOVEL INDUCED CURRENT PROTECTION SCHEME FOR LARGE-SCALE SOLAR PHOTOVOLTAIC SYSTEMS USING EARLY STREAMER EMISSIONS
by: Zakaria, et al.
Published: (2025)

Simulation on microgrid connected PV system under balance and unbalance fault
by: 2-s2.0-85073824175
Published: (2019)

Printed circuit board defect detection using mathematical morphology and MATLAB image processing tools
by: 2-s2.0-77956085996
Published: (2010)

Anomaly detection using K-Means and long-short term memory for predictive maintenance of large-scale solar (LSS) photovoltaic plant
by: 2-s2.0-85173448238
Published: (2023)