Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation

QRコード

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation

An anterior cruciate ligament (ACL) rupture is one of the most severe injuries an athlete can suffer, resulting in knee joint instability and significant pain. This study aims to develop and analyze 3D-printed knee orthoses for post-ACL injury rehabilitation to overcome conventional orthoses' d...

書誌詳細
出版年:	International Exchange and Innovation Conference on Engineering and Sciences
第一著者:	2-s2.0-85213306488
フォーマット:	Conference paper
言語:	English
出版事項:	Kyushu University 2024
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85213306488&doi=10.5109%2f7323320&partnerID=40&md5=443e357e27726f9d3641ccff9dfd5658

類似資料

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
著者:: Adawiyah Zulkefli S.; Syamimi Ismail N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版事項: (2024)

FATIGUE EFFECT ON LANDING BIOMECHANICS AMONG INDIVIDUALS WITH ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION: A SYSTEMATIC REVIEW
著者:: 2-s2.0-85173823676
出版事項: (2023)

Enhancing 3D Printed Bed-Resting Ankle-Foot Orthosis Design through Topology Optimization
著者:: Ab Rashid A.M.; Mukhainizam A.H.D.; Rashid H.; Ramlee M.H.; Pangesty A.I.; Abdullah A.H.
出版事項: (2024)

Morbid hunger and hyperphagia post-traumatic brain injury in a young male: good prognosis with escitalopram and multidisciplinary rehabilitation
著者:: Zainudin M.F.; Yee C.M.; Nyein Yin K.
出版事項: (2024)

Development of Ophthalmology Eye Examination Device using 3D Printing Technology
著者:: Abdullah A.H.; Alimarizan F.; Aziz N.A.A.; Hazwani F.; Marwan S.H.
出版事項: (2024)

Development and future prospects of 3D printed surimi products: A review
著者:: Diao D.; Yang R.; Liu Y.; Zhao Y.; Chen M.; Chen Y.; Zheng B.; Khong H.Y.
出版事項: (2025)

Development and future prospects of 3D printed surimi products: A review
著者:: Diao, 等
出版事項: (2025)

Biomechanical Evaluation of Three-Dimensional Printed Leg Orthosis for Ankle Fixation: Finite Element and Thermal Analysis
著者:: Mohd Salaha Z.F.; Jauhari Efendie S.N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版事項: (2024)

A Study of 3D Printed Box Structure
著者:: 2-s2.0-85104174597
出版事項: (2021)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
著者:: Shahar, 等
出版事項: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
著者:: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
出版事項: (2025)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
著者:: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
出版事項: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
著者:: 2-s2.0-85215705046
出版事項: (2025)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
著者:: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
出版事項: (2022)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
著者:: 2-s2.0-85122086227
出版事項: (2022)

Evaluation of the Malalignment Varus-Valgus in Total Knee Arthroplasty Designed for Deep Knee Flexion Used Knee Kinematic Motion Simulator
著者:: 2-s2.0-85149046005
出版事項: (2023)

THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS
著者:: Maideen N.C.; Nazri M.H.; Budin S.; Hyie K.M.; Yusoff H.; Sahudin S.
出版事項: (2023)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
著者:: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
出版事項: (2023)

Plant oil body as an effective improver for surimi-based 3D printing
著者:: 2-s2.0-85204039180
出版事項: (2024)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
著者:: 2-s2.0-85166774849
出版事項: (2023)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
著者:: ATAN M.K.F.M.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; GUNAWAN T.S.; ZAIN Z.M.
出版事項: (2025)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
著者:: Atan, 等
出版事項: (2025)

Spectral Analysis of EEG Signals of Imagined Hand Twisting for Post-stroke Rehabilitation
著者:: Azmi I.N.; Mansor W.; Ahmad N.F.
出版事項: (2021)

Effects of Infill Density, Wall Perimeter and Layer Height in Fabricating 3D Printing Products
著者:: Mazlan M.A.; Anas M.A.; Nor Izmin N.A.; Abdullah A.H.
出版事項: (2023)

Effectiveness of Home-based Rehabilitation Program Services on Improving the QoL of Post-stroke Patients Post the Covid-19 Pandemic in Malang City
著者:: 2-s2.0-85210992272
出版事項: (2024)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
著者:: 2-s2.0-85189024462
出版事項: (2024)

Topology Optimization for Custom Bed-Resting Ankle Foot Orthosis
著者:: 2-s2.0-85189497509
出版事項: (2024)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
著者:: 2-s2.0-85132112562
出版事項: (2022)

Desmoid-type fibromatosis of the anterior chest wall; the first rare case in Malaysia
著者:: 2-s2.0-84986264877
出版事項: (2016)

Design & Development of Adjustable Handheld 3D Scanner Jig
著者:: 2-s2.0-85143405552
出版事項: (2022)

Force sensor detection and performance evaluation of new active system ankle foot orthosis
著者:: Hamid A.; Patar M.N.A.A.; Ayub M.A.
出版事項: (2012)

System Reconfiguration to Control Knee Extension with Time Delay Nonlinearity in Closed-Loop FES
著者:: 2-s2.0-85207092810
出版事項: (2024)

Adaptive Sliding Mode Feedback Control Algorithm for a Nonlinear Knee Extension Model
著者:: 2-s2.0-85166210929
出版事項: (2023)

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study
著者:: 2-s2.0-85148865825
出版事項: (2023)

High flex femoral component with slanted pegs improves fixation strength of total knee arthroplasty
著者:: Arsat Z.A.; Uda M.N.A.; Abdullah F.; Hashim M.K.R.; Mutallib M.F.A.; Kadarman A.H.; Ahmed Shokri A.; Aziz M.E.; Shuib S.
出版事項: (2023)

Development of level III radiotherapy dosimetry audit system using 3D PRESAGE dosimeter
著者:: Rahman, 等
出版事項: (2024)

PID-DTC Controller for Nonlinear Knee Extension Model with Time Delay Effect in Closed-Loop FES
著者:: 2-s2.0-85207102028
出版事項: (2024)

Prospect of Anterior Gradient 2 homodimer inhibition via repurposing FDA-approved drugs using structure-based virtual screening
著者:: Ullah S.; Khan S.U.; Khan A.; Junaid M.; Rafiq H.; Htar T.T.; Zhao Y.; Shah S.A.A.; Wadood A.
出版事項: (2022)

TOPOLOGY OPTIMIZATION AND MECHANICAL PROPERTIES STUDIES ON TOTAL KNEE REPLACEMENT (TKR) USING FINITE ELEMENT SIMULATION METHOD
著者:: Manap M.F.A.; Zainuddin P.N.B.; Ismail N.F.; Zubair A.F.; Halidi S.N.A.; Ismail H.
出版事項: (2023)

A Framework for Tele-rehabilitation Gaming System
著者:: Elaklouk A.M.S.; Zuarni Ramli R.; Edris I.; Padilla-Valdez N.; Jumaily A.A.
出版事項: (2023)