FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES

QRコード

FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES

Welding with filler material can be considered as an additive manufacturing process whereby it involves the deposition of molten metal in a form of droplets onto a substrate. Wire and Arc Additive Manufacturing (WAAM) and laser direct metal deposition (DMD) are applied for repair purposes, hard faci...

書誌詳細
出版年:	Journal of Advanced Manufacturing Technology
第一著者:	2-s2.0-85149545468
フォーマット:	論文
言語:	English
出版事項:	Penerbit Universiti Teknikal Malaysia Melaka 2022
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85149545468&partnerID=40&md5=379e0f3ba2ecaf43cf2cbc17070251a0

類似資料

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
著者:: 2-s2.0-85189668193
出版事項: (2024)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
著者:: Mohd Mansor M.S.; Raja S.; Yusof F.; Muhamad M.R.; Manurung Y.H.; Adenan M.S.; Hussein N.I.S.; Ren J.
出版事項: (2024)

Research challenges, quality control and monitoring strategy for Wire Arc Additive Manufacturing
著者:: 2-s2.0-85151789154
出版事項: (2023)

Effect of Copper Addition on the Properties of TiO2 Coatings Deposited by Air Plasma Spray Process
著者:: Rahim T.A.; Amir N.I.A.B.; Mohamad N.; Dom A.H.M.; Omar N.I.; Yusuf Y.; Bakar I.A.A.; Juoi J.M.
出版事項: (2023)

The effect of Gas Metal Arc Welding (GMAW) processes on different welding parameters
著者:: 2-s2.0-84901055998
出版事項: (2012)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
著者:: 2-s2.0-85215661119
出版事項: (2025)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
著者:: 2-s2.0-85166774849
出版事項: (2023)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
著者:: Rahman A.R.A.; Muhammad N.A.; Mat M.F.; Manurung Y.H.P.; Adenan M.S.; Busari Y.O.; Prajadhiana K.P.; Ginta T.L.; Triyono
出版事項: (2025)

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition
著者:: 2-s2.0-85202815409
出版事項: (2024)

Activated electric arc furnace slag as an efficient and reusable heterogeneous Fenton-like catalyst for the degradation of Reactive Black 5
著者:: 2-s2.0-84994513762
出版事項: (2016)

Multi-objective optimization in wire-electrical discharge machining (WEDM) of titanium alloy
著者:: Saedon J.B.; Jaafar N.; Nor N.H.M.; Yahaya M.A.; Husain H.
出版事項: (2015)

Design of Multiwavelength EDF-Raman Lasers Utilizing Mach-Zehnder Interferometer
著者:: 2-s2.0-85125597580
出版事項: (2021)

Study on depth penetration of molars teeth using carbon dioxide laser
著者:: 2-s2.0-84855894846
出版事項: (2011)

Ergonomics as a lean manufacturing tool for improvements in a manufacturing company
著者:: 2-s2.0-85018440148
出版事項: (2016)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
著者:: 2-s2.0-85213080147
出版事項: (2023)

Indoor flow datasets of two-layered cross-ventilation models by particle image velocimetry and hot wire anemometry
著者:: 2-s2.0-85178589629
出版事項: (2024)

Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C
著者:: 2-s2.0-84943270190
出版事項: (2015)

The effect of deposition time on the morphology of CuS electrodes fabricated by chemical bath deposition for supercapacitor applications
著者:: Abdullah H.; Sundararaj M.; Selvanathan V.; Naim N.M.; Akhtaruzzaman M.; Othman M.H.D.; Yap W.F.; Mohmad A.R.; Azman N.J.; Ahmad M.F.; Sampe J.; Yuliarto B.
出版事項: (2024)

Deposition of fine iron oxide particles in tap water using electrophoretic deposition (EPD) technique
著者:: Mohd Sharif S.; Abu Bakar N.F.; Naim M.
出版事項: (2015)

Board diversity and firm value: A study on Malaysian listed firms in manufacturing and non-manufacturing sectors
著者:: 2-s2.0-85169686474
出版事項: (2023)

Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications
著者:: 2-s2.0-84863725211
出版事項: (2012)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
著者:: Isnin N.S.; Nasir S.M.F.S.A.; Hemdi A.R.; Ismail H.; Yusoff H.; Nurmalasari R.
出版事項: (2023)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
著者:: HISHAM B.N.B.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; ZA'BAH N.F.; TUNG L.H.; ZAIN Z.M.
出版事項: (2025)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
著者:: Hisham, 等
出版事項: (2025)

Surface morphology study on effect of deposition temperature on nanostructured zinc oxide by chemical vapour deposition method
著者:: Khusaimi Z.; Ghani N.A.; Noor F.W.M.; Amizam S.; Rafaie H.A.; Mamat M.H.; Sahdan M.Z.; Abdullah N.; Abdullah S.; Rusop M.
出版事項: (2009)

Structural, optical and electrical properties of ZnO/Zn 2 GeO 4 porous-like thin film and wires
著者:: 2-s2.0-79951682791
出版事項: (2011)

High-temperature mechanical properties investigation of Al-6.5 % Cu gas tungsten arc welds made with scandium modified 2319 filler
著者:: Babu N.K.; Talari M.K.; Pan D.; Wei J.
出版事項: (2013)

Ultrafast laser plasma doping of Er3+ in Si3N4-on-silicon
著者:: Kamil S.A.; Chandrappan J.; Krauss T.F.; Jose G.
出版事項: (2019)

Mode-locked erbium-doped fiber laser based on Cr2GaC saturable absorber
著者:: 2-s2.0-85195815563
出版事項: (2024)

Blue laser imaging, blue light imaging, and linked color imaging for the detection and characterization of colorectal tumors
著者:: 2-s2.0-85063370300
出版事項: (2019)

Anodized TiO2 nanotubes using Ti wire in fluorinated ethylene glycol with air bubbles for removal of methylene blue dye
著者:: 2-s2.0-85119297495
出版事項: (2022)

A review of key principles in halal manufacturing
著者:: 2-s2.0-85008191023
出版事項: (2016)

Modal parameters of a laser spot welded structure using wave-based substructuring scheme
著者:: Basri A.B.A.; Febrina R.; Afriani L.; Rani M.N.A.; Yunus M.A.; Mirza W.I.I.W.I.; Shah M.A.S.A.
出版事項: (2022)

ELUCIDATING THE EFFECTS OF NEODYMIUM NANOPARTICLES ON JUDD-OFELT AND OPTICAL PARAMETERS OF ZINCTELLURITE GLASS FOR FIBER LASERS
著者:: Azlan, 等
出版事項: (2024)

Influence of machine feed rate in WEDM of Titanium Ti-6Al-4V with constant current (6A) using brass wire
著者:: 2-s2.0-84901048392
出版事項: (2012)

Microstructure evolution and mechanical properties investigation of Al-6 %Cu alloy laser and GTA welds; [Untersuchung der Mikrostrukturentwicklung und der mechanischen Eigenschaften von Laser- und WIG-Schweißnähten einer Al-6%Cu-Legierung]
著者:: Talari M.K.; Kishore Babu N.
出版事項: (2013)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
著者:: 2-s2.0-84971469649
出版事項: (2016)

Lean Manufacturing and Industry 4.0: Unveiling Trends, Applications, and Global Impacts in Manufacturing Through Comprehensive Literature Review
著者:: Azian, 等
出版事項: (2025)

Characteristics of ultrafine particle sources and deposition rates in primary school classrooms
著者:: 2-s2.0-84900803036
出版事項: (2014)

Design of an enhanced feature point matching algorithm utilizing 3D laser scanning technology for sculpture design
著者:: Zheng X.; Weng Z.
出版事項: (2025)