3D Numerical Analysis of Piled Raft Foundation on Soft Soil Improved by Stone Columns

QR Code

3D Numerical Analysis of Piled Raft Foundation on Soft Soil Improved by Stone Columns

This study investigated the behavior of piled raft foundations in soft soil improved by stone columns of different lengths and diameters. Three-dimensional (3D) finite element analyses were conducted to evaluate the effects of area replacement ratio and slenderness ratio on settlement behavior under...

Full description

Bibliographic Details
Published in:	Transportation Infrastructure Geotechnology
Main Author:	2-s2.0-85219699962
Format:	Article
Language:	English
Published:	Springer 2025
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85219699962&doi=10.1007%2fs40515-025-00539-2&partnerID=40&md5=f988c2a71f415ed6a2159212c105cb13

Similar Items

3D Numerical Analysis of Piled Raft Foundation on Soft Soil Improved by Stone Columns
by: Jais, et al.
Published: (2025)

Influence of Column Length on Settlement Performance of Floating Stone Column in Soft Clay
by: Azmi Y.I.; Nik Omar N.A.H.; Ng K.S.; Rashid A.S.A.; Mukri M.; Chew Y.M.
Published: (2025)

Strength development of bottom ash based geopolymer and their application in columns to improve soft soil underneath embankment: Achieving sustainability in ground improvement
by: Ullah, et al.
Published: (2025)

Strength development of bottom ash based geopolymer and their application in columns to improve soft soil underneath embankment: Achieving sustainability in ground improvement
by: 2-s2.0-85211584296
Published: (2025)

Experimental and Numerical Study of Floating Stone Columns Using Unit Cell Model Test
by: Shien, et al.
Published: (2024)

Numerical Study of the Seismic Response of Closed-Ended Pipe Pile in Cohesionless Soils
by: 2-s2.0-85145825191
Published: (2024)

Design and analyses of floating stone columns
by: 2-s2.0-84906812319
Published: (2014)

Prediction of axial limit capacity of stone columns using dimensional analysis
by: Nazaruddin A.T.; Mohamed Z.; Mohd Azizul L.; Hafez M.A.
Published: (2017)

Laboratory Study on Settlement Performance of Floating Stone Column
by: Ng K.S.; Ghani M.I.B.A.; Azahari M.H.B.; Omar N.A.H.B.N.; Azmi Y.I.B.
Published: (2024)

Effect of Area Replacement Ratio on Settlement Behaviour of Floating Stone Column
by: Omar N.A.H.N.; Shien N.K.; Azmi Y.I.; Rashid A.S.A.; Mukri M.; Ming C.Y.; Wu H.
Published: (2025)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
by: 2-s2.0-85170094598
Published: (2023)

Numerical investigation of fully confined RC column with carbon fiber reinforced polymer when expose to fire
by: 2-s2.0-85144557092
Published: (2023)

Scaling effects on the seismic response of a closed-end pipe pile embedded in dry and saturated coarse grain soils
by: 2-s2.0-85158897428
Published: (2024)

Plant oil body as an effective improver for surimi-based 3D printing
by: 2-s2.0-85204039180
Published: (2024)

Overview of soft intelligent computing technique for supercritical fluid extraction
by: 2-s2.0-85161330110
Published: (2020)

The piling installation vibration damage behaviour on drainage at construction site
by: 2-s2.0-85117295327
Published: (2021)

Risk assessment of piling work for mass rapid transit (MRT) construction project
by: Ahmad A.C.; Kamar I.F.M.; Wahid A.M.A.; Ismail M.F.N.S.
Published: (2019)

Investigation of the Scale Effect on the Static and Seismic Response of an Opened Ended Pipe Pile
by: 2-s2.0-85172180921
Published: (2024)

Engineering properties improvement of clayey soil using rice husk ash and coconut shell for road works
by: Ramli R.; Shukur N.A.A.; Walid T.I.A.M.; Idrus J.
Published: (2018)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
by: Rahman A.R.A.; Muhammad N.A.; Mat M.F.; Manurung Y.H.P.; Adenan M.S.; Busari Y.O.; Prajadhiana K.P.; Ginta T.L.; Triyono
Published: (2025)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
by: 2-s2.0-85215661119
Published: (2025)

Development and validation of D-PATH website to improve hypertension management among hypertensive patients in Malaysia
by: Ab Hamid M.R.; Buhari S.S.; Noor H.M.; Azizan N.‘.; Malek K.A.; Mohd Asmawi U.M.; Nor N.M.
Published: (2024)

A Study of 3D Printed Box Structure
by: 2-s2.0-85104174597
Published: (2021)

Optimization of Design Parameters using Taguchi Method for Thermal Stress Analysis in a 3D IC
by: Bin Sazali, et al.
Published: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
by: Adawiyah Zulkefli S.; Syamimi Ismail N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
Published: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
by: 2-s2.0-85213306488
Published: (2024)

Numerical heat transfer analysis of waste heat exchanger for exhaust gas energy recovery
by: 2-s2.0-84938581377
Published: (2015)

AI 2D-3D Generation in Architectural Design: A Divine Hand or a Pandora's Box
by: 2-s2.0-85219511098
Published: (2024)

Effectiveness of Role-playing Method on Knowledge, Clinical Skills, and Soft Skills Among Undergraduate Nursing Students: A Systematic Review
by: 2-s2.0-85219704113
Published: (2025)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
by: Shahar, et al.
Published: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
by: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
Published: (2025)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
by: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
Published: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
by: 2-s2.0-85215705046
Published: (2025)

Design & Development of Adjustable Handheld 3D Scanner Jig
by: 2-s2.0-85143405552
Published: (2022)

Effect of 3D and 2D cell culture systems on trophoblast extracellular vesicle physico-chemical characteristics and potency
by: Khan N.L.A.; Muhandiram S.; Dissanayake K.; Godakumara K.; Midekessa G.; Andronowska A.; Heath P.R.; Kodithuwakku S.; Hart A.R.; Fazeli A.
Published: (2024)

The soft skills emergency management that matters at the hardest time: A phenomenology study of healthcare worker's experiences during Kelantan flood 2014
by: Maznieda M.; Dalila R.; Rosnah S.; Rohaida I.; Rosmanajihah M.L.; Mizanurfakhri G.; Nurhanie M.
Published: (2022)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
by: 2-s2.0-85132112562
Published: (2022)

Coupled Thermo-Mechanical Analysis of Reinforced Concrete Columns Partially Confined with Carbon Fibre Reinforced Polymer (CFRP) at Elevated Temperatures
by: Buyong M.; Zakwan F.A.A.; Ismail R.; Ahmad H.; Hashim N.H.; Goh L.D.
Published: (2024)

Forensic Investigation to Retrieve 3D Shoe Impression: A Review
by: Halim M.I.A.; Imran I.H.; Sabri A.S.A.; Mahat M.M.; Karim U.K.A.; Subri M.S.M.
Published: (2024)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
by: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
Published: (2022)