3D Numerical Analysis of Piled Raft Foundation on Soft Soil Improved by Stone Columns

QR Code

3D Numerical Analysis of Piled Raft Foundation on Soft Soil Improved by Stone Columns

This study investigated the behavior of piled raft foundations in soft soil improved by stone columns of different lengths and diameters. Three-dimensional (3D) finite element analyses were conducted to evaluate the effects of area replacement ratio and slenderness ratio on settlement behavior under...

書目詳細資料
發表在:	Transportation Infrastructure Geotechnology
主要作者:	2-s2.0-85219699962
格式:	Article
語言:	English
出版:	Springer 2025
在線閱讀:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85219699962&doi=10.1007%2fs40515-025-00539-2&partnerID=40&md5=f988c2a71f415ed6a2159212c105cb13

相似書籍

3D Numerical Analysis of Piled Raft Foundation on Soft Soil Improved by Stone Columns
由: Jais, et al.
出版: (2025)

Influence of Column Length on Settlement Performance of Floating Stone Column in Soft Clay
由: Azmi Y.I.; Nik Omar N.A.H.; Ng K.S.; Rashid A.S.A.; Mukri M.; Chew Y.M.
出版: (2025)

Strength development of bottom ash based geopolymer and their application in columns to improve soft soil underneath embankment: Achieving sustainability in ground improvement
由: Ullah, et al.
出版: (2025)

Strength development of bottom ash based geopolymer and their application in columns to improve soft soil underneath embankment: Achieving sustainability in ground improvement
由: 2-s2.0-85211584296
出版: (2025)

Experimental and Numerical Study of Floating Stone Columns Using Unit Cell Model Test
由: Shien, et al.
出版: (2024)

Numerical Study of the Seismic Response of Closed-Ended Pipe Pile in Cohesionless Soils
由: 2-s2.0-85145825191
出版: (2024)

Design and analyses of floating stone columns
由: 2-s2.0-84906812319
出版: (2014)

Prediction of axial limit capacity of stone columns using dimensional analysis
由: Nazaruddin A.T.; Mohamed Z.; Mohd Azizul L.; Hafez M.A.
出版: (2017)

Laboratory Study on Settlement Performance of Floating Stone Column
由: Ng K.S.; Ghani M.I.B.A.; Azahari M.H.B.; Omar N.A.H.B.N.; Azmi Y.I.B.
出版: (2024)

Effect of Area Replacement Ratio on Settlement Behaviour of Floating Stone Column
由: Omar N.A.H.N.; Shien N.K.; Azmi Y.I.; Rashid A.S.A.; Mukri M.; Ming C.Y.; Wu H.
出版: (2025)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
由: 2-s2.0-85170094598
出版: (2023)

Numerical investigation of fully confined RC column with carbon fiber reinforced polymer when expose to fire
由: 2-s2.0-85144557092
出版: (2023)

Scaling effects on the seismic response of a closed-end pipe pile embedded in dry and saturated coarse grain soils
由: 2-s2.0-85158897428
出版: (2024)

Plant oil body as an effective improver for surimi-based 3D printing
由: 2-s2.0-85204039180
出版: (2024)

Overview of soft intelligent computing technique for supercritical fluid extraction
由: 2-s2.0-85161330110
出版: (2020)

The piling installation vibration damage behaviour on drainage at construction site
由: 2-s2.0-85117295327
出版: (2021)

Risk assessment of piling work for mass rapid transit (MRT) construction project
由: Ahmad A.C.; Kamar I.F.M.; Wahid A.M.A.; Ismail M.F.N.S.
出版: (2019)

Investigation of the Scale Effect on the Static and Seismic Response of an Opened Ended Pipe Pile
由: 2-s2.0-85172180921
出版: (2024)

Engineering properties improvement of clayey soil using rice husk ash and coconut shell for road works
由: Ramli R.; Shukur N.A.A.; Walid T.I.A.M.; Idrus J.
出版: (2018)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
由: Rahman A.R.A.; Muhammad N.A.; Mat M.F.; Manurung Y.H.P.; Adenan M.S.; Busari Y.O.; Prajadhiana K.P.; Ginta T.L.; Triyono
出版: (2025)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
由: 2-s2.0-85215661119
出版: (2025)

Development and validation of D-PATH website to improve hypertension management among hypertensive patients in Malaysia
由: Ab Hamid M.R.; Buhari S.S.; Noor H.M.; Azizan N.‘.; Malek K.A.; Mohd Asmawi U.M.; Nor N.M.
出版: (2024)

A Study of 3D Printed Box Structure
由: 2-s2.0-85104174597
出版: (2021)

Optimization of Design Parameters using Taguchi Method for Thermal Stress Analysis in a 3D IC
由: Bin Sazali, et al.
出版: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
由: Adawiyah Zulkefli S.; Syamimi Ismail N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
由: 2-s2.0-85213306488
出版: (2024)

Numerical heat transfer analysis of waste heat exchanger for exhaust gas energy recovery
由: 2-s2.0-84938581377
出版: (2015)

AI 2D-3D Generation in Architectural Design: A Divine Hand or a Pandora's Box
由: 2-s2.0-85219511098
出版: (2024)

Effectiveness of Role-playing Method on Knowledge, Clinical Skills, and Soft Skills Among Undergraduate Nursing Students: A Systematic Review
由: 2-s2.0-85219704113
出版: (2025)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
由: Shahar, et al.
出版: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
由: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
出版: (2025)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
由: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
出版: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
由: 2-s2.0-85215705046
出版: (2025)

Design & Development of Adjustable Handheld 3D Scanner Jig
由: 2-s2.0-85143405552
出版: (2022)

Effect of 3D and 2D cell culture systems on trophoblast extracellular vesicle physico-chemical characteristics and potency
由: Khan N.L.A.; Muhandiram S.; Dissanayake K.; Godakumara K.; Midekessa G.; Andronowska A.; Heath P.R.; Kodithuwakku S.; Hart A.R.; Fazeli A.
出版: (2024)

The soft skills emergency management that matters at the hardest time: A phenomenology study of healthcare worker's experiences during Kelantan flood 2014
由: Maznieda M.; Dalila R.; Rosnah S.; Rohaida I.; Rosmanajihah M.L.; Mizanurfakhri G.; Nurhanie M.
出版: (2022)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
由: 2-s2.0-85132112562
出版: (2022)

Coupled Thermo-Mechanical Analysis of Reinforced Concrete Columns Partially Confined with Carbon Fibre Reinforced Polymer (CFRP) at Elevated Temperatures
由: Buyong M.; Zakwan F.A.A.; Ismail R.; Ahmad H.; Hashim N.H.; Goh L.D.
出版: (2024)

Forensic Investigation to Retrieve 3D Shoe Impression: A Review
由: Halim M.I.A.; Imran I.H.; Sabri A.S.A.; Mahat M.M.; Karim U.K.A.; Subri M.S.M.
出版: (2024)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
由: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
出版: (2022)