Natural Weathering Effects on the Mechanical, Rheological, and Morphological Properties of Magnetorheological Elastomer (MRE) in Tropical Climate

QRコード

Natural Weathering Effects on the Mechanical, Rheological, and Morphological Properties of Magnetorheological Elastomer (MRE) in Tropical Climate

Magnetorheological elastomer (MRE) materials have the potential to be used in a wide range of applications that require long-term service in hostile environments. These widespread applications will result in the emergence of MRE-specific durability issues, where durability refers to performance unde...

書誌詳細
出版年:	International Journal of Molecular Sciences
第一著者:	2-s2.0-85137873232
フォーマット:	論文
言語:	English
出版事項:	MDPI 2022
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85137873232&doi=10.3390%2fijms23179929&partnerID=40&md5=0ff906a38963f5fe50219829fdb1f401

類似資料

Unveiling the Influence of natural weathering on the nanomechanical properties of magnetorheological elastomers
著者:: Johari, 等
出版事項: (2024)

Unveiling the Influence of natural weathering on the nanomechanical properties of magnetorheological elastomers
著者:: 2-s2.0-85211186371
出版事項: (2024)

Experimental study on mechanical properties of elastomer containing carbon nanotubes
著者:: 2-s2.0-85044005515
出版事項: (2018)

Effect of Bottom Ash on Rheological and Physico-Mechanical Properties of High Early Strength Self-Compacting Brick (HES-SCB)
著者:: Apandi N.M.; Zailani W.W.A.; Zain M.R.M.; Beddu S.; Ramli M.Z.; Sinarta I.N.; Agustini N.K.A.
出版事項: (2025)

Effect of Bottom Ash on Rheological and Physico-Mechanical Properties of High Early Strength Self-Compacting Brick (HES-SCB)
著者:: 2-s2.0-85215662008
出版事項: (2025)

Evolution from graphite to graphene elastomer composites
著者:: Sadasivuni K.K.; Ponnamma D.; Thomas S.; Grohens Y.
出版事項: (2014)

Physical and Rheological Properties of Coconut Waste Modified Bitumen
著者:: Hashim W.; Mohd Johari A.F.J.; Kamaluddin N.A.; Zainuddin N.I.; Noh N.I.F.Md.; Shaffie E.
出版事項: (2024)

Performance evaluation of unconcentrated photovoltaic-thermoelectric generator hybrid system under tropical climate
著者:: Shatar N.M.; Rahman M.A.A.; Muhtazaruddin M.N.; Salim S.A.Z.S.; Singh B.; Muhammad-Sukki F.; Bani N.A.; Saudi A.S.M.; Ardila-Rey J.A.
出版事項: (2019)

Investigation into hot-mix asphalt moisture-induced damage under tropical climatic conditions
著者:: 2-s2.0-84887111562
出版事項: (2014)

Structural performance and ductility of fiber reinforced polymer concrete bonding system under tropical climates
著者:: Mohd Hashim M.H.; Mohd Sam A.R.; Warid Hussin M.; Mohd Arshad M.F.
出版事項: (2013)

Temperature-corrected Performance Ratio of Grid-Connected Photovoltaic System: Tropical versus Continental Climate
著者:: Ibrahim, 等
出版事項: (2025)

Physico-mechanical and decay resistance properties of chemically modified tropical wood material
著者:: 2-s2.0-84868491548
出版事項: (2013)

Effect of Bacterial Cellulose Nanocrystals on the Mechanical, Morphological, and Optical Properties of Zirconomer: An In Vitro Study
著者:: Sivanathiran R.; Al-Marzok M.I.K.; Multani A.S.; Singbal K.; Ismail M.F.
出版事項: (2024)

Effect of bio fillers on mechanical properties of natural rubber latex films
著者:: 2-s2.0-85093124328
出版事項: (2019)

Effect of glass fiber loading and reprocessing cycles on the mechanical, thermal, and morphological properties of isotactic polypropylene composites
著者:: 2-s2.0-85145400833
出版事項: (2023)

The Effect of Eggshell Fillers on the Physical, Mechanical, and Morphological Properties of Date palm Fibre Reinforced Bio-epoxy Composites
著者:: 2-s2.0-85160828428
出版事項: (2023)

Influence of Drying Temperature in the Oven on Physical, Morphology and Mechanical Properties of Mycelium Composite
著者:: Farrahnoor A.; Hishamuddini A.D.N.; Yusoff H.; Hyie K.M.; Maideen N.C.; Fohimi N.A.M.; Zhou B.T.
出版事項: (2025)

Mechanical, morphological, thermal, and fire-retardant properties of sustainable chitosan-lignin based bioplastics
著者:: Agustiany, 等
出版事項: (2025)

Performance analysis and parametric studies of a bi-fluid type photovoltaic/thermal (PV/T) solar collector in simultaneous mode under tropical climate conditions
著者:: Jarimi H.; Bakar M.N.A.; Othman M.; Din M.
出版事項: (2017)

Basic principle and good practices of rheology for polymers for teachers and beginners
著者:: 2-s2.0-85137044152
出版事項: (2022)

Effect of Activated Palm Kernel Shell Nanoparticles as a Bio-filler on the Mechanical Properties Vulcanized Natural Rubber
著者:: 2-s2.0-85218955147
出版事項: (2025)

Mechanical, Thermal and Morphological Properties of Woven Kenaf Fiber Reinforced Polylactic Acid (PLA) Composites
著者:: Nor M.A.M.; Sapuan S.M.; Yusoff M.Z.M.; Zainudin E.S.
出版事項: (2022)

erraced house used in tropical zones by particle image velocimetryQuantifying natural cross-ventilation flow of a two-layered model used for terraced houses in tropical zones by particle image velocimetry
著者:: 2-s2.0-85171550934
出版事項: (2023)

Green financing and climate change: challenges and regulatory mechanisms in Malaysia and Indonesia
著者:: 2-s2.0-85191311716
出版事項: (2024)

An overview of 33 years of trends in space weather research: a bibliometric analysis (1988-2021)
著者:: Hairuddin M.A.; Zainuddin A.; Latiff Z.I.A.; Anuar N.M.; Ashar N.D.K.; Hamidi Z.S.; Nordin A.H.; Yassin A.I.M.; Yoshikawa A.; Jusoh M.H.
出版事項: (2025)

Weather Research Forecast (WRF) modification of land surface albedo simulations for urban Near Surface Temperature
著者:: Salleh S.A.; Latif Z.A.; Chan A.; Morris K.I.; Ooi M.C.G.; Mohd W.M.N.W.
出版事項: (2015)

Effect of stacking sequence and fiber content on mechanical and morphological properties of woven kenaf/polyester fiber reinforced polylactic acid (PLA) hybrid laminated composites
著者:: 2-s2.0-85121921993
出版事項: (2022)

Rheological flow models of banana peel pectin jellies as affected by sugar concentration
著者:: Rasidek N.A.M.; Nordin M.F.M.; Iwamoto K.; Rahman N.A.; Nagatsu Y.; Tokuyama H.
出版事項: (2018)

Rheological behavior and temperature dependency study of saraline-based super lightweight completion fluid
著者:: Amir Z.; Jan B.M.; Khalil M.; Abdul Wahab A.K.; Hassan Z.
出版事項: (2015)

Compressive strength properties of Malaysian tropical timber in structural size: Timber strength grading
著者:: Azlan H.M.; Puaad M.B.F.M.; Ahmad Z.; Talip A.R.A.; Yasin M.H.
出版事項: (2018)

Machine Learning Models for Predicting Flood Events Using Weather Data: An Evaluation of Logistic Regression, LightGBM, and XGBoost
著者:: Maharina; Paryono T.; Fauzi A.; Indra J.; Sihabudin; Harahap M.K.; Rizki L.T.
出版事項: (2025)

Effect of post annealing temperature on surface morphology and photoluminescence properties of ZnO thin film
著者:: 2-s2.0-84891605320
出版事項: (2014)

Structural and rheological changes of texturized mung bean protein induced by feed moisture during extrusion
著者:: 2-s2.0-85096823419
出版事項: (2021)

Investigation of the Estuarine Salinity-Morphology Characteristics Effects
著者:: 2-s2.0-85219157670
出版事項: (2025)

Effect of substrate temperature on structural and morphological properties of indium tin oxide nanocolumns using RF magnetron sputtering
著者:: 2-s2.0-84896888014
出版事項: (2014)

Effect of mixing variables on physical properties of modified bitumen using natural rubber latex
著者:: 2-s2.0-85052367906
出版事項: (2018)

Preparation, thermal degradation, and rheology studies for polylactic acid (PLA) and palm stearin (PS) blend: A review
著者:: 2-s2.0-85126990907
出版事項: (2022)

COMPARISON OF CANOPY COVER EFFECTS ON RAINFALL INTERCEPTION LOSS IN TROPICAL FOREST WITH HOMOGENOUS AND MIXED TREE SPECIES
著者:: 2-s2.0-85150078544
出版事項: (2023)

Modelling optimum sites for locating reservoirs in tropical environments
著者:: 2-s2.0-0038240089
出版事項: (2003)

A review of recent developments in natural fibre composites and their mechanical performance
著者:: Pickering K.L.; Efendy M.G.A.; Le T.M.
出版事項: (2016)