Effect on Salak Tinggi residual soil mixed Bentonite as compacted clay liner

This paper present the result from experimental studies on using bentonite mixed with residual soil. The entire testings were performed on Salak Tinggi residual soil mixed with various percentage of bentonite content (5%, 10% and 15%). A series of laboratories were performed to investigate the effec...

詳細記述

書誌詳細
出版年:IOP Conference Series: Materials Science and Engineering
第一著者: 2-s2.0-85065453071
フォーマット: Conference paper
言語:English
出版事項: Institute of Physics Publishing 2019
オンライン・アクセス:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85065453071&doi=10.1088%2f1757-899X%2f513%2f1%2f012024&partnerID=40&md5=521e2254a0fa56033c813514df760589
その他の書誌記述
要約:This paper present the result from experimental studies on using bentonite mixed with residual soil. The entire testings were performed on Salak Tinggi residual soil mixed with various percentage of bentonite content (5%, 10% and 15%). A series of laboratories were performed to investigate the effectiveness of mixed samples associated to physical properties testing such as: particle size distribution, pH, plastic index (PL), liquid limit (LL), plasticity index (PI) and linear shrinkage (LS). Meanwhile the standard proctor compaction test was conducted on mixed soil-benonite samples to determine the maximum dry density (MDD) and optimum moisture content (OMC). In addition the permeability test to determine the hydraulic conductivity was conducted at MDD condition at effective stress of 100 kPa. It was found that the addition of bentonite to the Salak Tinggi residual soil changed the physical properties result. Meanwhile, compaction results show a decrement in the MDD with increment of bentonite percentage mixed. The result also showed the bentonite mixed decreases the hydraulic conductivity value (k < 1x10-9 m/s) for Salak Tinggi soil significantly. This finding shows that by using the small amount of 5% bentonite significantly can be used as compacted of soil liner materials. © Published under licence by IOP Publishing Ltd.
ISSN:17578981
DOI:10.1088/1757-899X/513/1/012024