Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa

This paper presents a new optimum design for an off-grid hybrid solar photovoltaic (PV), wind turbine (WT), and battery storage system for power isolated dwellings in Malaysia and South Africa. Selecting a desirable design of the WT/PV/Battery system among a wide variety of configurations, particula...

詳細記述

書誌詳細
出版年:Energy Conversion and Management
第一著者: 2-s2.0-85142003450
フォーマット: 論文
言語:English
出版事項: Elsevier Ltd 2022
オンライン・アクセス:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85142003450&doi=10.1016%2fj.enconman.2022.116468&partnerID=40&md5=603a3d6caf687fce8406eccb0c940c3b
id Mohammed Ridha H.; Hizam H.; Mirjalili S.; Lutfi Othman M.; Effendy Ya'acob M.; Ahmadipour M.; Ismaeel N.Q.
spelling Mohammed Ridha H.; Hizam H.; Mirjalili S.; Lutfi Othman M.; Effendy Ya'acob M.; Ahmadipour M.; Ismaeel N.Q.
2-s2.0-85142003450
Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa
2022
Energy Conversion and Management
274

10.1016/j.enconman.2022.116468
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85142003450&doi=10.1016%2fj.enconman.2022.116468&partnerID=40&md5=603a3d6caf687fce8406eccb0c940c3b
This paper presents a new optimum design for an off-grid hybrid solar photovoltaic (PV), wind turbine (WT), and battery storage system for power isolated dwellings in Malaysia and South Africa. Selecting a desirable design of the WT/PV/Battery system among a wide variety of configurations, particularly at a favorable level of reliability, lowering the total cost, and reducing the surplus energy, remains a challenging task. The procedure of this work is summarized as follows: First, the parameter of the three diode PV model is optimally extracted from datasheet information to forecast the output power of the Yingli PV module. Then, the upper and lower variables bounds of the WT/PV/Battery system are intuitively determined. Afterward, the numerical method is employed to identify every possible configurations inside the design space. The non-dominated multi-objective principle is then established to generate optimal sets of Pareto front solutions. Finally, an integration of the best worst method, technique for order of preference by similarity to ideal solution, and group decision making technique are employed to weight the objectives with complete consistency ratios and rank the optimal designs based on practical judgments. The performance results showed that the optimal designs are comprised of 1 WTs, 105 PV modules (21 in series and 5 in parallel), and 69 storage batteries with zero loss of load probability (LLP), 60185.47 ($) of life cycle cost (LCC), and 13548017.77 KWh of excess energy for Malaysian scenario. While the optimum configuration of the South African case study consists of 16 WTs, 80 PV modules (20 in series and 4 in parallel), and 69 storage batteries with a favorable LLP values of 0.00068, 59180.15 ($) of LCC, and 19174160.54 ($) of excess energy, respectively. It can be concluded that the proposed methodology for finding appropriate size of the WT/PV/Battery system is capable of operating with extremely confident dependability while minimizing the overall cost of the system and minimizing the surplus energy. © 2022 Elsevier Ltd
Elsevier Ltd
1968904
English
Article

author 2-s2.0-85142003450
spellingShingle 2-s2.0-85142003450
Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa
author_facet 2-s2.0-85142003450
author_sort 2-s2.0-85142003450
title Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa
title_short Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa
title_full Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa
title_fullStr Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa
title_full_unstemmed Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa
title_sort Multi-objective optimization and multi-criteria decision making aided by numerical method: Framework and a case study of Malaysia and South Africa
publishDate 2022
container_title Energy Conversion and Management
container_volume 274
container_issue
doi_str_mv 10.1016/j.enconman.2022.116468
url https://www.scopus.com/inward/record.uri?eid=2-s2.0-85142003450&doi=10.1016%2fj.enconman.2022.116468&partnerID=40&md5=603a3d6caf687fce8406eccb0c940c3b
description This paper presents a new optimum design for an off-grid hybrid solar photovoltaic (PV), wind turbine (WT), and battery storage system for power isolated dwellings in Malaysia and South Africa. Selecting a desirable design of the WT/PV/Battery system among a wide variety of configurations, particularly at a favorable level of reliability, lowering the total cost, and reducing the surplus energy, remains a challenging task. The procedure of this work is summarized as follows: First, the parameter of the three diode PV model is optimally extracted from datasheet information to forecast the output power of the Yingli PV module. Then, the upper and lower variables bounds of the WT/PV/Battery system are intuitively determined. Afterward, the numerical method is employed to identify every possible configurations inside the design space. The non-dominated multi-objective principle is then established to generate optimal sets of Pareto front solutions. Finally, an integration of the best worst method, technique for order of preference by similarity to ideal solution, and group decision making technique are employed to weight the objectives with complete consistency ratios and rank the optimal designs based on practical judgments. The performance results showed that the optimal designs are comprised of 1 WTs, 105 PV modules (21 in series and 5 in parallel), and 69 storage batteries with zero loss of load probability (LLP), 60185.47 ($) of life cycle cost (LCC), and 13548017.77 KWh of excess energy for Malaysian scenario. While the optimum configuration of the South African case study consists of 16 WTs, 80 PV modules (20 in series and 4 in parallel), and 69 storage batteries with a favorable LLP values of 0.00068, 59180.15 ($) of LCC, and 19174160.54 ($) of excess energy, respectively. It can be concluded that the proposed methodology for finding appropriate size of the WT/PV/Battery system is capable of operating with extremely confident dependability while minimizing the overall cost of the system and minimizing the surplus energy. © 2022 Elsevier Ltd
publisher Elsevier Ltd
issn 1968904
language English
format Article
accesstype
record_format scopus
collection Scopus
_version_ 1828987866924974080