Control Strength Lightweight Mortar made by Recycled Concrete Aggregate and Expanded Perlite

Rheological behavior and temperature dependency study of saraline-based super lightweight completion fluid
by: Amir Z.; Jan B.M.; Khalil M.; Abdul Wahab A.K.; Hassan Z.
Published: (2015)

Results of fitted neural network models on Malaysian aggregate dataset
by: Ghani N.A.M.; Kamaruddin S.B.A.; Musirin I.; Hashim H.
Published: (2018)

Adoption and performance of click and mortar retailers: Malaysia evidence
by: Ali A.; Omar N.; Daud N.M.; Mohamed I.S.
Published: (2012)

Investigating The Strength and Density of Mortar with Rubber and Clamshell Powders
by: Shahidan N.I.I.; Yee H.M.; Mohd Apandi N.; Senin S.F.; Chong C.H.; Kim J.Y.
Published: (2025)

Evaluation of Latex Modified Asphalt Mixture with Recycled Concrete Aggregate (RCA)
by: Arshad A.K.; Shaffie E.; Mohamad Kamal M.I.A.; Kamaluddin N.A.; Hashim W.
Published: (2024)

Recycled polyethylene terephthalate (PET) and rubber crumb as replacement to fine aggregate
by: Norhana A.R.; Kartini K.; Hamidah M.S.
Published: (2016)

Pooling and expanding registries of familial hypercholesterolaemia to assess gaps in care and improve disease management and outcomes: Rationale and design of the global EAS Familial Hypercholesterolaemia Studies Collaboration
by: Vallejo-Vaz A.J.; Akram A.; Kondapally Seshasai S.R.; Cole D.; Watts G.F.; Hovingh G.K.; Kastelein J.J.P.; Mata P.; Raal F.J.; Santos R.D.; Soran H.; Freiberger T.; Abifadel M.; Aguilar-Salinas C.A.; Alnouri F.; Alonso R.; Al-Rasadi K.; Banach M.; Bogsrud M.P.; Bourbon M.; Bruckert E.; Car J.; Ceska R.; Corral P.; Descamps O.; Dieplinger H.; Do C.T.; Durst R.; Ezhov M.V.; Fras Z.; Gaita D.; Gaspar I.M.; Genest J.; Harada-Shiba M.; Jiang L.; Kayikcioglu M.; Lam C.S.P.; Latkovskis G.; Laufs U.; Liberopoulos E.; Lin J.; Lin N.; Maher V.; Majano N.; Marais A.D.; März W.; Mirrakhimov E.; Miserez A.R.; Mitchenko O.; Nawawi H.; Nilsson L.; Nordestgaard B.G.; Paragh G.; Petrulioniene Z.; Pojskic B.; Reiner Ž.; Sahebkar A.; Santos L.E.; Schunkert H.; Shehab A.; Slimane M.N.; Stoll M.; Su T.-C.; Susekov A.; Tilney M.; Tomlinson B.; Tselepis A.D.; Vohnout B.; Widén E.; Yamashita S.; Catapano A.L.; Ray K.K.
Published: (2016)

Water Quality Assessment of Ex-Mining Lakes Converted Man-made Wetlands in Paya Indah Wetlands, Selangor, Malaysia
by: Jamion, et al.
Published: (2025)

Water Quality Assessment of Ex-Mining Lakes Converted Man-made Wetlands in Paya Indah Wetlands, Selangor, Malaysia
by: Jamion N.A.; Lee K.E.; Mokhtar M.; Goh T.L.
Published: (2025)

High-temperature mechanical properties investigation of Al-6.5 % Cu gas tungsten arc welds made with scandium modified 2319 filler
by: Babu N.K.; Talari M.K.; Pan D.; Wei J.
Published: (2013)

Mechanical Properties of Mortar with Low-Density Polyethylene as Sand Replacement and Steel Fibre Additive
by: Tuan Lokman T.N.L.; Hooi Min Y.; Ahmad Zailani W.W.; Senin S.F.; Hwa C.C.; Yeol K.J.
Published: (2025)

The Utilisation of Coconut Shell (Cocos Nucifera) as a Partial Aggregate Replacement on the Properties of Concrete in Terms of Thermal Behaviour
by: Leman A.S.; Shahidan S.; Naziri A.S.M.; Tayeh B.
Published: (2025)

Performance of Carbide Lime Waste Mortar via 24 Hours Accelerated CO2 Curing
by: Talip A.R.A.; Khalid N.H.A.; sam A.R.M.; Joudah Z.H.; Othman R.
Published: (2024)

Effect of Combined Carbon Nano Tubes and Graphene Oxide on the High-Volume Fly Ash Mortar Properties
by: Senin S.F.; Maizuar; Khairullah; Usrina N.; Desmi A.; Bahri S.; Phoenna N.
Published: (2024)

Mechanical Properties of High-Volume Fly Ash Mortar Modified by Hybrid Carbon Nano Tube and Graphene Oxide
by: Maizuar; Fithra, et al.
Published: (2024)

Mechanical Properties of High-Volume Fly Ash Mortar Modified by Hybrid Carbon Nano Tube and Graphene Oxide
by: Maizuar; Fithra H.; Khairullah; Usrina N.; Bahri S.; Senin S.F.
Published: (2024)

Psychological Empowerment Link Using Employee Performance and Organizational Commitment on the Generation Gap: PLS-MGA Analysis
by: Ibrahim N.; Farinordin F.A.; Mohamad N.I.; Mohd Soffian Lee U.H.; Ismail A.
Published: (2024)

Electricity generation from renewable energy based on abandoned wind fan
by: Markom A.M.; Hadri M.H.A.; Yazid T.Z.M.; Yusof Z.M.; Markom M.A.; Muhammad A.R.
Published: (2022)

Dynamic mechanical analysis of arenga pinnata fibre reinforced epoxy composites: Effects of fibre aging
by: Abdullah A.H.; Jamaludin A.H.B.
Published: (2015)

Mechanical and physical properties of Kelempayan (Neolamarckia cadamba) particleboard
by: Nazri W.M.; Nur Sakinah M.T.; Jamaludin K.
Published: (2018)

A GENERALIZED MODELLING APPROACH TO ASSESS CLIMATE INFLUENCES ON HAND, FOOT, AND MOUTH DISEASE IN EAST COAST MALAYSIA
by: Wahid, et al.
Published: (2024)

Delaminating control on drilling the medium density fiber board with robust optimization
by: Jamaludin K.R.; Adenan M.S.; Daud M.Y.M.; Raman N.A.
Published: (2012)

Next frontier in photocatalytic hydrogen production through CdS heterojunctions
by: Islam, et al.
Published: (2025)

Food security: Effect on peroxisome proliferator-activated receptor gamma (PPARγ) and BMI among young adult
by: Alias N.A.; Md Nor N.; Mastuki M.F.; Md Isa K.A.
Published: (2016)

An Examination of a Dental School’s Holistic Preadmission Criteria as a Predictor of Student Performance
by: Sabri B.A.Md.; Azman L.F.L.; Halim M.H.S.A.; Dasor M.Md.
Published: (2024)

Real-time FPGA-based Sound Source Localization
by: Jamaludin, et al.
Published: (2024)

Hydrometallurgical Recovery of Copper from Computer-Printed Circuit Boards
by: Jani W.N.F.A.; Rani N.H.A.; Mohamad N.F.; Jamaludin S.I.S.
Published: (2025)

Assessing the impact of the 'Know Your Medicine programme on medication literacy among children aged 10-12 years in Selangor, Malaysia: A pre- and post-survey intervention study
by: Zulkifli, et al.
Published: (2024)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
by: Paijan, et al.
Published: (2024)

Performance evaluation of a nearest level control-based TCHB multilevel inverter for PMSM motors in electric vehicle systems
by: Hossain, et al.
Published: (2025)

Sustainable Protocols For Leaf Sample Collection in In-Vitro Culture: Evaluating The Impact of Sample Bags and Hydrogen Peroxide Pre-Sterilization
by: Setamam, et al.
Published: (2024)

Cardiac A-lines in fast scan as a sign of pneumopericardium
by: Md Noor J.; Eddie E.A.
Published: (2019)

Evaluating technology resistance and technology satisfaction on students' performance
by: Norzaidi M.D.; Salwani M.I.
Published: (2009)

Enhancing Engineering Education in Drilling Fluids and Cementing Technology Through Active Learning Strategies
by: Suppiah R.R.; Md Zin R.
Published: (2024)

Application and challenges of big data analytics in low-carbon indoor space design
by: Zeng, et al.
Published: (2025)

Developing a Shariah-compliant medical services framework in Malaysia: an expert system approach using fuzzy Delphi method and interpretive structural modelling
by: Che Jamaludin F.I.; Abdullah M.R.T.L.; Endut M.N.A.A.; Saifuddeen S.M.; Hamimi K.A.; Harun S.
Published: (2025)