Water Quality Assessment of Tasik Biru Seri Kundang for Potable Drinking Water

• الحاوية / القاعدة: JURNAL KEJURUTERAAN
• المؤلفون الرئيسيون: Ahmad, Nur Syabila Sidek; Kasmuri, Norhafezah; Selim, Helmy; Nayono, Satoto Edar; Mojiri, Amin
• التنسيق: مقال
• اللغة: English
• منشور في: UKM PRESS 2024
• الموضوعات: Engineering
• الوصول للمادة أونلاين: https://www-webofscience-com.uitm.idm.oclc.org/wos/woscc/full-record/WOS:001421957400038
• تدمد: 0128-0198; 2289-7526
• DOI: 10.17576/jkukm-2024-36(6)-34

Malaysias' water supply has shifted from abundant to scarce, prompting a thorough examination of potential solutions, particularly using Tasik Biru Seri Kundangs' untapped resources. Assessing the reservoirs' capacity to provide clean water consistently amidst increasing demand is crucial. The objective was to analyze Tasik Biru Seri Kundangs' water characteristics to determine its suitability as a drinking water source, which was evaluated through the Water Quality Index (WQI) and heavy metal concentration measurements. The water quality analysis involved field and laboratory testing, assessing parameters such as pH, dissolved oxygen, turbidity, chemical oxygen demand (COD), biochemical oxygen demand (BOD), suspended solids (SS), and ammonia-nitrogen (AN). The findings of the study showed that the pH was 7.26 and 7.67, the dissolved oxygen (DO) was 9.77 and 7.15 mg/L, the chemical oxygen demand (COD) and biochemical oxygen demand (BOD) was 0 mg/L each, the suspended solids (SS) were 10 and 7 mg/L. The ammonia-nitrogen (AN) was 0.08 and 0.1 mg/L, separately. According to the results, all input points were categorized as Class I, indicating that no treatment was required for the water supply. Concentrations of heavy metals, including chromium (Cr), iron (Fe), copper (Cu), zinc (Zn), and manganese (Mn), were measured at levels such as 0.017 and 0.086 mg/L for chromium (Cr), 0.25 and 0.53 mg/L for iron (Fe), 0.21 and 0.26 mg/L for zinc met WHO standards, chromium levels at the outlet exceeded the permissible limit of 0.05 mg/L, indicating a high corrective measures to ensure compliance with regulatory guidelines and safeguard public health.