Effects of refrigerated air on tool wear

QRコード

Effects of refrigerated air on tool wear

Increased tool wear of tungsten carbide tools may be attributed to high cutting temperatures. Cooling the tool with liquid coolant and lubricants is impractical for cutting dry wood and wood composites, and thus refrigerated air was used for cooling the tool in this study. A total of three solid tun...

書誌詳細
出版年:	Wood and Fiber Science
第一著者:	Gisip J.; Gazo R.; Stewart H.A.
フォーマット:	論文
言語:	English
出版事項:	2007
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-34547739150&partnerID=40&md5=57546606b2c03dfddb8f333e2796ba55

類似資料

Effects of cryogenic treatment and refrigerated air on tool wear when machining medium density fiberboard
著者:: Gisip J.; Gazo R.; Stewart H.A.
出版事項: (2009)

ASSESSMENT OF TOOL NOSE WEAR USING SCANNED IMAGES OF CUTTING INSERTS
著者:: Lim T.Y.; Chiang E.P.; Woo Y.P.
出版事項: (2024)

Effect of Temperature Variation on Wear Behaviour of Austenitic Stainless Steel
著者:: 2-s2.0-85012271921
出版事項: (2016)

Abrasive wear behavior of CNT-filled unidirectional kenaf-epoxy composites
著者:: 2-s2.0-85100480188
出版事項: (2021)

A methodology for facial measurement towards the establishment of ready-to-wear hijab sizing
著者:: 2-s2.0-84994399987
出版事項: (2016)

Techniques of Direct Composite Build Ups in Managing Tooth Wear Cases: A Narrative Review
著者:: Lim G.S.; Lee W.M.; Foo K.R.
出版事項: (2024)

Wear mechanism of TiCN and TiALN coated drill in drilling of carbon steel
著者:: 2-s2.0-84943328611
出版事項: (2015)

The use of Islamic hedging instruments as non-speculative risk management tools
著者:: Mohamad S.; Othman J.; Roslin R.; Lehner O.M.
出版事項: (2014)

Linux Forensic Analysis and Extraction Tool
著者:: 2-s2.0-85189935394
出版事項: (2023)

Wear Properties of Acid and Silane Modified CNT Filled Hybrid Glass/Kenaf Epoxy Composites
著者:: 2-s2.0-105000088422
出版事項: (2018)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
著者:: Paijan L.H.; Maleque M.A.; Rosli Z.M.; Abdollah M.F.; Mamat M.F.; Idriss A.N.M.
出版事項: (2024)

Amperometric microbiosensor as an alternative tool for investigation of D-serine in brain
著者:: Zain Z.M.; Ghani S.A.; O'Neill R.D.
出版事項: (2012)

Hardhat-YOLO: A YOLOv5-based Lightweight Hardhat-Wearing Detection Algorithm in Substation Sites
著者:: 2-s2.0-85195077787
出版事項: (2024)

Wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions
著者:: 2-s2.0-85082317767
出版事項: (2019)

Effect of Copper Addition on the Properties of TiO2 Coatings Deposited by Air Plasma Spray Process
著者:: Rahim T.A.; Amir N.I.A.B.; Mohamad N.; Dom A.H.M.; Omar N.I.; Yusuf Y.; Bakar I.A.A.; Juoi J.M.
出版事項: (2023)

Effect of cutting parameters on tool life during end milling of AISI 4340 under MQL condition
著者:: 2-s2.0-85122855909
出版事項: (2022)

Development of an assessment tool for team integration in alliance projects
著者:: Che Ibrahim C.K.I.; Costello S.B.; Wilkinson S.
出版事項: (2015)

Cross-Cultural Adaptation and Reliability of the Home Falls and Accidents Screening Tool (HOME FAST) in Assessing Fall-Risk Home Hazards for Stroke Using Technologies over a Conventional Home Visit
著者:: Ainuddin H.A.; Romli M.H.; Hamid T.A.; Salim M.S.F.; Din H.M.; MacKenzie L.
出版事項: (2022)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
著者:: Paijan, 等
出版事項: (2024)

Prediction of Daily Air Pollutants Concentration and Air Pollutant Index Using Machine Learning Approach
著者:: Mustakim N.A.; Ul-Saufie A.Z.; Shaziayani W.N.; Noor N.M.; Mutalib S.
出版事項: (2023)

Wear properties of nanoclay modified basalt fibre composites under dry adhesive sliding, two-body abrasive, and slurry pot erosive
著者:: 2-s2.0-85122698718
出版事項: (2022)

Utilizing a Low-Cost Air Quality Sensor: Assessing Air Pollutant Concentrations and Risks Using Low-Cost Sensors in Selangor, Malaysia
著者:: Khaslan Z.; Nadzir M.S.M.; Johar H.; Siqi Z.; Sulong N.A.; Mohamed F.; Majumdar S.; Suris F.N.A.; Hawari N.S.S.L.; Borah J.; Gee M.O.C.; Wahab M.I.A.; Bakar M.A.A.; Ariff N.M.; Japeri A.Z.U.-S.M.; Nor M.F.F.M.; Rabuan U.; Ali S.H.M.; Murugan B.; Cayetano M.G.
出版事項: (2024)

Ergonomics as a lean manufacturing tool for improvements in a manufacturing company
著者:: 2-s2.0-85018440148
出版事項: (2016)

A Deep Study on Machining of Titanium Superalloys and its Cutting Tool Materials
著者:: 2-s2.0-85206853520
出版事項: (2024)

Is It Citizen-Centric? A Tool for Evaluating E-government Websites’ Citizen-Centricity
著者:: 2-s2.0-85135959172
出版事項: (2023)

Cracklabel: A thresholding-based crack labeling tool for asphalt pavement images
著者:: 2-s2.0-85115290644
出版事項: (2021)

Application of graph theory and matrix approach as decision analysis tool for smartphone selection
著者:: 2-s2.0-85078669995
出版事項: (2019)

The need for a comprehensive case-severity-grading tool for molar-incisor hypomineralisation (MIH)
著者:: Brejawi M.; Venkiteswaran A.; Ergieg S.M.O.; Sabri B.M.
出版事項: (2024)

T-BACCO SCORE: A predictive scoring tool for tuberculosis (TB) loss to follow-up among TB smokers
著者:: Sharani Z.Z.; Ismail N.; Yasin S.M.; Isa M.R.; Razali A.; Sherzkawee M.A.; Ismail A.I.
出版事項: (2023)

Development and demonstration of a social sustainability assessment tool for the construction project life cycle
著者:: Kordi N.E.; Belayutham S.; Che Ibrahim C.K.I.
出版事項: (2025)

The need for a comprehensive case-severity-grading tool for molar-incisor hypomineralisation (MIH)
著者:: 2-s2.0-85191341403
出版事項: (2024)

Experimental investigation of adding vanes into the air intake runner of a diesel engine run on biodiesel to improve the air-fuel mixing
著者:: Bari S.; Saad I.
出版事項: (2015)

Ergonomics intervention in assembling air handler panels
著者:: 2-s2.0-84886303994
出版事項: (2013)

Effect of die and punch radius on springback of stainless steel sheet metal in the air V-die bending process
著者:: 2-s2.0-84938631780
出版事項: (2015)

Effects of air intake pressure on the engine performance, fuel economy and exhaust emissions of a small gasoline engine
著者:: 2-s2.0-84920173642
出版事項: (2014)

Automated writing evaluation tools for Indonesian undergraduate English as a foreign language students’ writing
著者:: Miranty D.; Widiati U.; Cahyono B.Y.; Sharif T.I.S.T.
出版事項: (2023)

E-anatomy Kit: An Innovative and Hybrid Tool for Gross Anatomy of Respiratory System Digital Practical
著者:: 2-s2.0-85140893268
出版事項: (2022)

Diagnostic Accuracy of Shear Wave Elastography as an Adjunct Tool in Detecting Axillary Lymph Nodes Metastasis
著者:: 2-s2.0-85114250172
出版事項: (2022)

Printed circuit board defect detection using mathematical morphology and MATLAB image processing tools
著者:: 2-s2.0-77956085996
出版事項: (2010)

THE VOLUMETRIC EFFICIENCY OF A SINGLE-CYLINDER SPARK-IGNITION ENGINE AS AFFECTED BY AIR INTAKE TEMPERATURE AND HUMIDITY
著者:: Som A.H.M.; Basri M.H.; Mat S.C.; Pahmi A.; Rabilah R.; Azmi H.
出版事項: (2024)