Effects of refrigerated air on tool wear

QR Code

Effects of refrigerated air on tool wear

Increased tool wear of tungsten carbide tools may be attributed to high cutting temperatures. Cooling the tool with liquid coolant and lubricants is impractical for cutting dry wood and wood composites, and thus refrigerated air was used for cooling the tool in this study. A total of three solid tun...

书目详细资料
发表在:	Wood and Fiber Science
主要作者:	Gisip J.; Gazo R.; Stewart H.A.
格式:	文件
语言:	English
出版:	2007
在线阅读:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-34547739150&partnerID=40&md5=57546606b2c03dfddb8f333e2796ba55

相似书籍

Effects of cryogenic treatment and refrigerated air on tool wear when machining medium density fiberboard
由: Gisip J.; Gazo R.; Stewart H.A.
出版: (2009)

ASSESSMENT OF TOOL NOSE WEAR USING SCANNED IMAGES OF CUTTING INSERTS
由: Lim T.Y.; Chiang E.P.; Woo Y.P.
出版: (2024)

Effect of Temperature Variation on Wear Behaviour of Austenitic Stainless Steel
由: 2-s2.0-85012271921
出版: (2016)

Abrasive wear behavior of CNT-filled unidirectional kenaf-epoxy composites
由: 2-s2.0-85100480188
出版: (2021)

A methodology for facial measurement towards the establishment of ready-to-wear hijab sizing
由: 2-s2.0-84994399987
出版: (2016)

Techniques of Direct Composite Build Ups in Managing Tooth Wear Cases: A Narrative Review
由: Lim G.S.; Lee W.M.; Foo K.R.
出版: (2024)

Wear mechanism of TiCN and TiALN coated drill in drilling of carbon steel
由: 2-s2.0-84943328611
出版: (2015)

The use of Islamic hedging instruments as non-speculative risk management tools
由: Mohamad S.; Othman J.; Roslin R.; Lehner O.M.
出版: (2014)

Linux Forensic Analysis and Extraction Tool
由: 2-s2.0-85189935394
出版: (2023)

Wear Properties of Acid and Silane Modified CNT Filled Hybrid Glass/Kenaf Epoxy Composites
由: 2-s2.0-105000088422
出版: (2018)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
由: Paijan L.H.; Maleque M.A.; Rosli Z.M.; Abdollah M.F.; Mamat M.F.; Idriss A.N.M.
出版: (2024)

Amperometric microbiosensor as an alternative tool for investigation of D-serine in brain
由: Zain Z.M.; Ghani S.A.; O'Neill R.D.
出版: (2012)

Hardhat-YOLO: A YOLOv5-based Lightweight Hardhat-Wearing Detection Algorithm in Substation Sites
由: 2-s2.0-85195077787
出版: (2024)

Wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions
由: 2-s2.0-85082317767
出版: (2019)

Effect of Copper Addition on the Properties of TiO2 Coatings Deposited by Air Plasma Spray Process
由: Rahim T.A.; Amir N.I.A.B.; Mohamad N.; Dom A.H.M.; Omar N.I.; Yusuf Y.; Bakar I.A.A.; Juoi J.M.
出版: (2023)

Effect of cutting parameters on tool life during end milling of AISI 4340 under MQL condition
由: 2-s2.0-85122855909
出版: (2022)

Development of an assessment tool for team integration in alliance projects
由: Che Ibrahim C.K.I.; Costello S.B.; Wilkinson S.
出版: (2015)

Cross-Cultural Adaptation and Reliability of the Home Falls and Accidents Screening Tool (HOME FAST) in Assessing Fall-Risk Home Hazards for Stroke Using Technologies over a Conventional Home Visit
由: Ainuddin H.A.; Romli M.H.; Hamid T.A.; Salim M.S.F.; Din H.M.; MacKenzie L.
出版: (2022)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
由: Paijan, et al.
出版: (2024)

Prediction of Daily Air Pollutants Concentration and Air Pollutant Index Using Machine Learning Approach
由: Mustakim N.A.; Ul-Saufie A.Z.; Shaziayani W.N.; Noor N.M.; Mutalib S.
出版: (2023)

Wear properties of nanoclay modified basalt fibre composites under dry adhesive sliding, two-body abrasive, and slurry pot erosive
由: 2-s2.0-85122698718
出版: (2022)

Utilizing a Low-Cost Air Quality Sensor: Assessing Air Pollutant Concentrations and Risks Using Low-Cost Sensors in Selangor, Malaysia
由: Khaslan Z.; Nadzir M.S.M.; Johar H.; Siqi Z.; Sulong N.A.; Mohamed F.; Majumdar S.; Suris F.N.A.; Hawari N.S.S.L.; Borah J.; Gee M.O.C.; Wahab M.I.A.; Bakar M.A.A.; Ariff N.M.; Japeri A.Z.U.-S.M.; Nor M.F.F.M.; Rabuan U.; Ali S.H.M.; Murugan B.; Cayetano M.G.
出版: (2024)

Ergonomics as a lean manufacturing tool for improvements in a manufacturing company
由: 2-s2.0-85018440148
出版: (2016)

A Deep Study on Machining of Titanium Superalloys and its Cutting Tool Materials
由: 2-s2.0-85206853520
出版: (2024)

Is It Citizen-Centric? A Tool for Evaluating E-government Websites’ Citizen-Centricity
由: 2-s2.0-85135959172
出版: (2023)

Cracklabel: A thresholding-based crack labeling tool for asphalt pavement images
由: 2-s2.0-85115290644
出版: (2021)

Application of graph theory and matrix approach as decision analysis tool for smartphone selection
由: 2-s2.0-85078669995
出版: (2019)

The need for a comprehensive case-severity-grading tool for molar-incisor hypomineralisation (MIH)
由: Brejawi M.; Venkiteswaran A.; Ergieg S.M.O.; Sabri B.M.
出版: (2024)

T-BACCO SCORE: A predictive scoring tool for tuberculosis (TB) loss to follow-up among TB smokers
由: Sharani Z.Z.; Ismail N.; Yasin S.M.; Isa M.R.; Razali A.; Sherzkawee M.A.; Ismail A.I.
出版: (2023)

Development and demonstration of a social sustainability assessment tool for the construction project life cycle
由: Kordi N.E.; Belayutham S.; Che Ibrahim C.K.I.
出版: (2025)

The need for a comprehensive case-severity-grading tool for molar-incisor hypomineralisation (MIH)
由: 2-s2.0-85191341403
出版: (2024)

Experimental investigation of adding vanes into the air intake runner of a diesel engine run on biodiesel to improve the air-fuel mixing
由: Bari S.; Saad I.
出版: (2015)

Ergonomics intervention in assembling air handler panels
由: 2-s2.0-84886303994
出版: (2013)

Effect of die and punch radius on springback of stainless steel sheet metal in the air V-die bending process
由: 2-s2.0-84938631780
出版: (2015)

Effects of air intake pressure on the engine performance, fuel economy and exhaust emissions of a small gasoline engine
由: 2-s2.0-84920173642
出版: (2014)

Automated writing evaluation tools for Indonesian undergraduate English as a foreign language students’ writing
由: Miranty D.; Widiati U.; Cahyono B.Y.; Sharif T.I.S.T.
出版: (2023)

E-anatomy Kit: An Innovative and Hybrid Tool for Gross Anatomy of Respiratory System Digital Practical
由: 2-s2.0-85140893268
出版: (2022)

Diagnostic Accuracy of Shear Wave Elastography as an Adjunct Tool in Detecting Axillary Lymph Nodes Metastasis
由: 2-s2.0-85114250172
出版: (2022)

Printed circuit board defect detection using mathematical morphology and MATLAB image processing tools
由: 2-s2.0-77956085996
出版: (2010)

THE VOLUMETRIC EFFICIENCY OF A SINGLE-CYLINDER SPARK-IGNITION ENGINE AS AFFECTED BY AIR INTAKE TEMPERATURE AND HUMIDITY
由: Som A.H.M.; Basri M.H.; Mat S.C.; Pahmi A.; Rabilah R.; Azmi H.
出版: (2024)