Microstructure evolution and mechanical properties investigation of Al-6 %Cu alloy laser and GTA welds; [Untersuchung der Mikrostrukturentwicklung und der mechanischen Eigenschaften von Laser- und WIG-Schweißnähten einer Al-6%Cu-Legierung]

QR Code

Microstructure evolution and mechanical properties investigation of Al-6 %Cu alloy laser and GTA welds; [Untersuchung der Mikrostrukturentwicklung und der mechanischen Eigenschaften von Laser- und WIG-Schweißnähten einer Al-6%Cu-Legierung]

Microstructural development, post-weld ageing response and mechanical properties of gas tungsten arc and C02 laser welded AI-6%Cu (AA2219) alloy were investigated in the present study. The fusion zone of laser weld consists of three parts the fine grains in the middle part, the columnar zone and equ...

书目详细资料
发表在:	Praktische Metallographie/Practical Metallography
主要作者:	Talari M.K.; Kishore Babu N.
格式:	文件
语言:	German
出版:	2013
在线阅读:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84887267411&doi=10.3139%2f147.110244&partnerID=40&md5=49fe69d9bf01da86fc99262200fe2b8a

相似书籍

High-temperature mechanical properties investigation of Al-6.5 % Cu gas tungsten arc welds made with scandium modified 2319 filler
由: Babu N.K.; Talari M.K.; Pan D.; Wei J.
出版: (2013)

Influence of machine feed rate in WEDM of Titanium Ti-6Al-4V with constant current (6A) using brass wire
由: 2-s2.0-84901048392
出版: (2012)

Constructing trifunctional MoTe2/As van der Waals heterostructures for versatile energy applications
由: 2-s2.0-85141302252
出版: (2022)

A numerical solution for Duffing-Van der Pol oscillators using a backward difference formulation
由: 2-s2.0-85054515988
出版: (2018)

Homogeneous-Heterogeneous Reactions on Al2O3-Cu Hybrid Nanofluid Flow Over a Shrinking Sheet
由: Waini I.; Jamrus F.N.; Kasim A.R.M.; Ishak A.; Pop I.
出版: (2023)

Achieving type-II SnSSe/as van der waals heterostructure with satisfactory oxygen tolerance for optoelectronic and photovoltaic applications
由: 2-s2.0-85149890972
出版: (2023)

Stagnation Flow of Eyring-Powell Hybrid Cu-Al2O3/Water Nanofluid Towards a Riga Plate with Newtonian Heating
由: Aljabali A.; Kasim A.R.M.; Khashi’ie N.S.; Waini I.; Ariffin N.A.N.
出版: (2025)

Defects Optimization of Green Part Ti-6Al-4V with Palm Stearin Binder using Response Surface Methodology
由: Saedon J.B.; Mohamad Nor N.H.; Shawal S.; Arifin A.; Mifzal M.A.; Ahmad S.
出版: (2024)

Impact of Mn doping on structural, optical and dielectric properties of titanium-based double perovskite La2CuTi1-xMnxO6
由: Rafie M.S.M.; Mahat A.M.; Halizan M.Z.M.; Musyarofah M.; Mohamed Z.
出版: (2025)

Surface Characterization of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System
由: Saedon, et al.
出版: (2024)

On the Duality of Unsteady MHD Al2O3-Cu/Water Hybrid Nanofluid Flow over a Stretching/Shrinking Curved Surface with Newtonian Heating
由: 2-s2.0-85186876268
出版: (2023)

Kinetics Analysis on Catalytic Pyrolysis of Empty Fruit Bunch (EFB) with Copper Oxide Doped Aluminium Oxide (CuO/Al2O3) Catalyst
由: 2-s2.0-85098490712
出版: (2020)

FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES
由: 2-s2.0-85149545468
出版: (2022)

Design of Multiwavelength EDF-Raman Lasers Utilizing Mach-Zehnder Interferometer
由: 2-s2.0-85125597580
出版: (2021)

Study on depth penetration of molars teeth using carbon dioxide laser
由: 2-s2.0-84855894846
出版: (2011)

Thermos-physical properties and heat transfer characteristics of water/anti-freezing and Al2O3/CuO based nanofluid as a coolant for car radiator
由: 2-s2.0-85032340119
出版: (2018)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
由: Isnin N.S.; Nasir S.M.F.S.A.; Hemdi A.R.; Ismail H.; Yusoff H.; Nurmalasari R.
出版: (2023)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
由: HISHAM B.N.B.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; ZA'BAH N.F.; TUNG L.H.; ZAIN Z.M.
出版: (2025)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
由: Hisham, et al.
出版: (2025)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
由: 2-s2.0-85213080147
出版: (2023)

Ultrafast laser plasma doping of Er3+ in Si3N4-on-silicon
由: Kamil S.A.; Chandrappan J.; Krauss T.F.; Jose G.
出版: (2019)

Green Synthesis of Ag, Cu and AgCu Nanoparticles using Palm Leaves Extract as the Reducing and Stabilizing Agents
由: 2-s2.0-85050612407
出版: (2018)

Properties of kenaf/textile waste fibre hybridisation in a carbon nanotubes modified matrix; [Eigenschaften der Kenaf/Textil-Abfallfaser-Hybridisierung in einer Kohlenstoff-Nanoröhrchen-modifizierten Matrix]
由: 2-s2.0-85126475914
出版: (2022)

ELUCIDATING THE EFFECTS OF NEODYMIUM NANOPARTICLES ON JUDD-OFELT AND OPTICAL PARAMETERS OF ZINCTELLURITE GLASS FOR FIBER LASERS
由: Azlan, et al.
出版: (2024)

Modal parameters of a laser spot welded structure using wave-based substructuring scheme
由: Basri A.B.A.; Febrina R.; Afriani L.; Rani M.N.A.; Yunus M.A.; Mirza W.I.I.W.I.; Shah M.A.S.A.
出版: (2022)

Mode-locked erbium-doped fiber laser based on Cr2GaC saturable absorber
由: 2-s2.0-85195815563
出版: (2024)

Blue laser imaging, blue light imaging, and linked color imaging for the detection and characterization of colorectal tumors
由: 2-s2.0-85063370300
出版: (2019)

Analysis on Textual Hadith of Waqf Infrastructure in al-Kutub al-Sittah and Its Applications from the Perspective of Maqasid al-Sunnah
由: 2-s2.0-85176101750
出版: (2019)

Design of an enhanced feature point matching algorithm utilizing 3D laser scanning technology for sculpture design
由: Zheng X.; Weng Z.
出版: (2025)

Facile and green hydrothermal synthesis of MgAl/NiAl/ZnAl layered double hydroxide nanosheets: A physiochemical comparison
由: Kamal N.A.; Pungot N.H.; Che Soh S.K.; Ahmad Tajuddin N.
出版: (2024)

Raman, Judd–Ofelt, and photoluminescence analysis of Ho3+/Yb3+-doped borotellurite glasses for potential laser applications
由: Mazlan M.; Winie T.; Sazali E.S.; Zaid M.H.M.; Hisam R.
出版: (2024)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
由: 2-s2.0-84971469649
出版: (2016)

The Method of Ikhtiar By Imam Al-Tabari In Tafsir Jami’ Al- Bayan Aŉ Ta’wil Ay Al-Quran: Analytical Study Based on The Principles of Qiraat Sahihah; [KAEDAH IKHTIAR IMAM AL-TABARI DALAM TAFSIR JAMI’ AL-BAYAN A’N TA’WIL AY AL-QURAN: KAJIAN ANALISIS BERDASARKAN RUKUN QIRAAT SAHIHAH]
由: 2-s2.0-85218774096
出版: (2023)

Thermal diffusivity studies of ZnO-CuO at high temperatures
由: Akhir R.M.; Wahab Z.A.
出版: (2015)

Characterization of dy-doped at ca site in low-density Bi1.6Pb0.4Sr2Ca2-xDyxCu3Oy superconductor; [Pencirian Dy yang didopkan pada tapak Ca dalam ketumpatan rendah Bi1.6Pb0.4Sr2Ca2-XDyXCu3OY Superkonduktor]
由: 2-s2.0-84939518743
出版: (2015)

Money laundering from maqāṣid al- sharīʿah perspective with a particular reference to preservation of wealth (hifz al-māl)
由: 2-s2.0-85112855926
出版: (2021)

Adsorption potential of CuO-embedded chitosan bead for the removal of acid blue 25 dye
由: Saheed, et al.
出版: (2024)

The effect of deposition time on the morphology of CuS electrodes fabricated by chemical bath deposition for supercapacitor applications
由: Abdullah H.; Sundararaj M.; Selvanathan V.; Naim N.M.; Akhtaruzzaman M.; Othman M.H.D.; Yap W.F.; Mohmad A.R.; Azman N.J.; Ahmad M.F.; Sampe J.; Yuliarto B.
出版: (2024)

Synthesis and characterization of thiolated chitosan beads for removal of Cu(II) and Cd(II) from wastewater
由: Yong S.K.; Bolan N.; Lombi E.; Skinner W.
出版: (2013)

Effect of pH on Adsorption of Cu2+ by Using Composite of Polyvinyl Alcohol (PVA)/Kaolin
由: 2-s2.0-85133658230
出版: (2022)