A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant

QR Code

A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant

Medical implants are normally used in clinical practice to treat most orthopaedics situations involving bone fractures, deformities, dislocation, and lengthening. It should be noted that specific measures regarding biomechanical and biomaterial characteristics are required for a successful post-surg...

書目詳細資料
發表在:	Malaysian Journal of Medicine and Health Sciences
主要作者:	Al-Tam B.Y.; Ramlee M.H.; Wahab A.A.; Seng G.H.; Abdullah A.H.
格式:	Review
語言:	English
出版:	Universiti Putra Malaysia Press 2023
在線閱讀:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85147498693&doi=10.47836%2fmjmhs.19.1.41&partnerID=40&md5=6f4193aa0f639965a152c5f30f0d7dfa

相似書籍

Determining hyperelastic parameters of human skin using 2D finite element modelling and simulation
由: 2-s2.0-84867919926
出版: (2012)

Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model
由: 2-s2.0-85159289861
出版: (2023)

Crash Investigation on Frontal Vehicle Chassis Frame using Finite Element Simulation
由: 2-s2.0-85141464799
出版: (2022)

Which is the best method of sterilization for recycled bone autograft in limb salvage surgery: A radiological, biomechanical and histopathological study in rabbit
由: Yasin N.F.; Singh V.A.; Saad M.; Omar E.
出版: (2015)

TOPOLOGY OPTIMIZATION AND MECHANICAL PROPERTIES STUDIES ON TOTAL KNEE REPLACEMENT (TKR) USING FINITE ELEMENT SIMULATION METHOD
由: Manap M.F.A.; Zainuddin P.N.B.; Ismail N.F.; Zubair A.F.; Halidi S.N.A.; Ismail H.
出版: (2023)

Current trend of lattice structures designed and analysis for porous hip implants: A short review
由: Abdullah N.N.A.A.; Abdullah A.H.; Ramlee M.H.
出版: (2022)

Natural Frequencies Prediction of Hybrid Composite Laminate based on Finite Element Simulation and Artificial Neural Network
由: 2-s2.0-85219506859
出版: (2024)

A review on behavior, material properties and finite element simulation of concrete tunnel linings under fire
由: 2-s2.0-85129768015
出版: (2022)

Biomechanical Evaluation of Three-Dimensional Printed Leg Orthosis for Ankle Fixation: Finite Element and Thermal Analysis
由: Mohd Salaha Z.F.; Jauhari Efendie S.N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版: (2024)

Performance Comparison between Polyester and Denim Textile Antenna on Non-Identical Human Upper Arm Sizes for 5G mid-band
由: Noor S.K.; Ramli N.; Rahman N.H.A.; Najib Mohd Yasin M.
出版: (2021)

Investigation of the effect of Berkovich and Cube Corner indentations on the mechanical behavior of fused silica using molecular dynamics and finite element simulation
由: 2-s2.0-85121742138
出版: (2022)

Review on the mechanical properties and biocompatibility of titanium implant: The role of niobium alloying element
由: 2-s2.0-85108859543
出版: (2021)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
由: Hanipah S.H.; C. Hassan N.F.N.; Talib A.T.; P Mohammed M.A.; Wakisaka M.; Abdullah Z.
出版: (2025)

Effect of Implant Positioning in Cemented Hip Arthroplasty
由: Aznan Z.A.; Azahan N.M.K.; Marwan S.H.; Taufiqurrakhman M.; Pandit H.; Khan T.; Abdullah A.H.
出版: (2025)

Finite element model updating on structural components of simplified model of aircraft pylon
由: Bahari A.R.; Yunus M.A.; Rani M.N.A.; Shah M.A.S.A.; Mirza W.I.I.W.I.
出版: (2022)

Reliability, agreement, and validity of digital weighing scale with MatScan in limb load measurement
由: Kumar S.N.S.; Omar B.; Htwe O.; Joseph L.H.; Krishnan J.; Esfehani A.J.; Min L.L.
出版: (2014)

Upper a-Graphical Topological Spaces with the COVID-19 Form and Its Diffusion
由: Damag, et al.
出版: (2025)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
由: Hanipah, et al.
出版: (2025)

Finite element-based fatigue life prediction of a load-carrying cruciform joint
由: 2-s2.0-84938634562
出版: (2015)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
由: 2-s2.0-85170094598
出版: (2023)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
由: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
出版: (2024)

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study
由: 2-s2.0-85148865825
出版: (2023)

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure
由: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Nazeri M.N.; Shuib S.
出版: (2024)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
由: 2-s2.0-85132112562
出版: (2022)

Optimization of Spot Weld Joining Parameters for Dissimilar Plate Materials through Finite Element Model Updating and Response Surface Methodology
由: 2-s2.0-85213279061
出版: (2024)

Operational modal analysis and finite element model updating of ultra-high-performance concrete bridge based on ambient vibration test
由: 2-s2.0-85129912488
出版: (2022)

Effect of Implant Positioning in Cemented Hip Arthroplasty
由: 2-s2.0-85215693614
出版: (2025)

Characterizations of fish bone-based hydroxyapatite: Effect of different calcination temperatures
由: Aziz H.A.; Mardziah C.M.; Natasha A.N.; Alexander C.H.C.
出版: (2024)

Are medical students confident in taking a sexual history? An assessment on attitude and skills from an upper middle income country
由: 2-s2.0-84931078936
出版: (2015)

COMPARISON BETWEEN JOHNSON COOK’S PLASTICITY WITH DAMAGE MODEL AND ISOTROPIC HARDENING PLASTICITY WITH DUCTILE DAMAGE MODEL ON ALUMINIUM ALLOY SHEET 2024 T3 TENSILE TEST IN CORRELATING THE FINITE ELEMENT METHOD (FEM) TO THE EXPERIMENT TEST RESULT
由: Gunsalam H.; Abdullah A.S.; Awi M.; Aziz M.R.; Kamarudin K.-A.
出版: (2023)

Investigation the mechanical properties of a novel multicomponent scaffold coated with a new bio-nanocomposite for bone tissue engineering: Fabrication, simulation and characterization
由: 2-s2.0-85119330392
出版: (2021)

Recent advancements in polymer matrix nanocomposites for bone tissue engineering applications
由: Sagadevan S.; Schirhagl R.; Rahman M.Z.; Bin Ismail M.F.; Lett J.A.; Fatimah I.; Mohd Kaus N.H.; Oh W.-C.
出版: (2023)

Exploring the Potential of Moringa oleifera in Managing Bone Loss: Insights from Preclinical Studies
由: Hairi H.A.; Jusoh R.R.; Sadikan M.Z.; Hasan W.N.W.; Shuid A.N.
出版: (2025)

In vitro dissolution testing models of ocular implants for posterior segment drug delivery
由: Adrianto M.F.; Annuryanti F.; Wilson C.G.; Sheshala R.; Thakur R.R.S.
出版: (2022)

In vitro dissolution testing models of ocular implants for posterior segment drug delivery
由: 2-s2.0-85112306162
出版: (2022)

The role of shear viscosity as a biomarker for improving chronic kidney disease detection using shear wave elastography: A computational study using a validated finite element model
由: 2-s2.0-85160299232
出版: (2023)

Comparing effectiveness of high-fidelity human patient simulation vs case-based learning in pharmacy education
由: 2-s2.0-84908299218
出版: (2014)

Surface Characterization of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System
由: Saedon, et al.
出版: (2024)

The Potential of Radiolabeled Bisphosphonates in SPECT and PET for Bone Imaging
由: Ashhar, et al.
出版: (2024)

A Review of Animal Models for Studying Bone Health in Type-2 Diabetes Mellitus (T2DM) and Obesity
由: Norazman S.I.; Mohd Zaffarin A.S.; Shuid A.N.; Hassan H.; Soleiman I.N.; Kuan W.S.; Alias E.
出版: (2024)