A computational fluid dynamics analysis of cryo-CO2 flow and thermal behaviour in high-speed milling process

QR رمز

A computational fluid dynamics analysis of cryo-CO2 flow and thermal behaviour in high-speed milling process

Cryogenic CO2 machining performance is mainly dependent on how well heat generated during cutting is dissipated from the cutting zone. Understanding the heat transfer phenomenon is crucial for optimizing thermal behavior and its effects, which remain challenging to capture experimentally. Thus, this...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	Applied Thermal Engineering
المؤلف الرئيسي:	Mohamad Fauzee N.F.; Abdul Halim N.H.; Solihin Z.H.; Tharazi I.; Zakaria I.A.; Hadi M.A.
التنسيق:	مقال
اللغة:	English
منشور في:	Elsevier Ltd 2025
الوصول للمادة أونلاين:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85214335349&doi=10.1016%2fj.applthermaleng.2024.125342&partnerID=40&md5=1784b58fb22cf367902c3601e4db3d82

مواد مشابهة

A computational fluid dynamics analysis of cryo-CO2 flow and thermal behaviour in high-speed milling process
بواسطة: Fauzee, وآخرون
منشور في: (2025)

Predictive Model and Optimisation of MQL Mist Flow Velocity Through CFD Analysis
بواسطة: Zulkifli, وآخرون
منشور في: (2024)

The Determination of Vehicle Speed at the Passing Distance in the Actual Traffic Flow
بواسطة: 2-s2.0-85096941462
منشور في: (2020)

Heat Transfer in Hartmann Flow of Hybrid Nano-Jeffrey Fluid with Heat Absorption and Thermal Radiation Impact
بواسطة: 2-s2.0-85184685034
منشور في: (2023)

How Fluid Particle Interaction Affects the Flow of Dusty Williamson Fluid
بواسطة: Mohd Kasim A.R.; Arifin N.S.; Mohd Zokri S.; Ariffin N.A.N.; Shafie S.
منشور في: (2023)

Thermal Behaviour of Hybrid Nanofluids in Water: Bio Glycol Mixture in Cooling Plates of PEMFC
بواسطة: Johari M.N.I.; Zakaria I.A.; Affendy N.S.M.
منشور في: (2022)

Computational analysis of fluid flow and convection heat transfer characteristics of multiple heat sink for electrical power stack cooling
بواسطة: Azizan N.A.C.; Norazam N.F.; Tijani A.S.
منشور في: (2025)

Stagnation-Point Flow and Heat Transfer over an Exponentially Stretching/Shrinking Inclined Plate in a Micropolar Fluid
بواسطة: Bakar F.N.A.; Soid S.K.; Norzawary N.H.A.; Sohut F.H.
منشور في: (2024)

(Hybrid Nanoparticles Effects on the Flow of a Eyring-Powell Fluid Past a Shrinking Sheet)
بواسطة: Waini, وآخرون
منشور في: (2024)

Hyperbolic Tangent Fluid Model for Stagnation Flow of Hybrid Nanofluid Over a Stretching Sheet
بواسطة: 2-s2.0-85167593442
منشور في: (2023)

Design concept and mathematical model of a bi-fluid photovoltaic/thermal (PV/T) solar collector
بواسطة: 2-s2.0-84897371825
منشور في: (2014)

Analysis of blood flow into the main artery via mitral valve: Fluid structure interaction model
بواسطة: 2-s2.0-79959646486
منشور في: (2010)

Speed of death from accidental suffocation in infancy
بواسطة: Jothee S.; Ahmad N.A.B.; Zainun K.A.; Byard R.W.
منشور في: (2025)

Boundary Layer Flow of Dusty Williamson Fluid with Variable Viscosity Effect Over a Stretching Sheet
بواسطة: 2-s2.0-85119501195
منشور في: (2021)

MECHANISM OF MEMBRANE FOULING IN HYBRID MEMBRANE PHOTOCATALYTIC REACTOR FOR PALM OIL MILL SECONDARY EFFLUENT TREATMENT
بواسطة: Hawari Y.; Ngatiman M.; Mohamed Halim R.; Sharudin H.; Abd Kadir H.
منشور في: (2023)

Effects of thermal pre-treatment on empty palm fruit bunch as co-substrate for palm oil mill effluent anaerobic digestion
بواسطة: 2-s2.0-85127954802
منشور في: (2022)

Flow and Heat Transfer Analysis on Reiner-Philippoff Fluid Flow over a Stretching Sheet in the Presence of First and Second Order Velocity Slip and Temperature Jump Effects
بواسطة: 2-s2.0-85146444848
منشور في: (2023)

Computational analysis of fluid flow and convection heat transfer characteristics of multiple heat sink for electrical power stack cooling
بواسطة: Azizan, وآخرون
منشور في: (2025)

Two-phase flow of non-newtonian eyring fluid over a vertical stretched surface with temperature dependent viscosity
بواسطة: 2-s2.0-85109471371
منشور في: (2021)

Hybrid Nanoparticles Effects on the Flow of a Eyring-Powell Fluid Past a Shrinking Sheet; [Kesan Nanozarah Hibrid terhadap Aliran Bendalir Eyring-Powell pada Permukaan Mengecut]
بواسطة: Waini I.; Jamrus F.N.; Ishak A.; Pop I.
منشور في: (2024)

Performance analysis and parametric studies of a bi-fluid type photovoltaic/thermal (PV/T) solar collector in simultaneous mode under tropical climate conditions
بواسطة: Jarimi H.; Bakar M.N.A.; Othman M.; Din M.
منشور في: (2017)

The Properties of Hydroxyapatite Derived from Carbonate Eggshell Waste Through Ball Milling and Heat Treatment Method
بواسطة: Ghouse R.M.; Natasha A.N.; Shahedan N.F.; Ramesh S.; Bang L.T.
منشور في: (2024)

Thermal Conductivity of Al2O3 Nanofluid Utilizing Cross- linked Polyacrylic Acid (PAA) as the Base Fluid: An Experimental Study
بواسطة: Fauzi, وآخرون
منشور في: (2025)

Dusty Casson Fluid Flow containing Single-Wall Carbon Nanotubes with Aligned Magnetic Field Effect over a Stretching Sheet
بواسطة: 2-s2.0-85146469976
منشور في: (2023)

Identifying operating and posted speed limit relationship on federal route (FT) 05 in Selangor, Malaysia
بواسطة: Rahim A.M.A.; Adnan M.A.; Sulaiman N.; Latif F.H.A.; Yusoff N.M.
منشور في: (2018)

Thermal, Conductivity and Molecular Interaction Studies of Poly(ethylene oxide)/Poly(methyl acrylate) Solid Polymer Electrolytes
بواسطة: Halim S.I.A.; Chan C.H.; Winie T.
منشور في: (2017)

The Effect of Display Polarity on Reading Speed and Reading Error Among Young Adults
بواسطة: Muhamad N.; Mokhtar N.
منشور في: (2024)

Thermal and Hydraulic Performances of Carbon and Metallic Oxides-Based Nanomaterials
بواسطة: Afan H.A.; Aldlemy M.S.; Ahmed A.M.; Jawad A.H.; Naser M.H.; Homod R.Z.; Mussa Z.H.; Abdulkadhim A.H.; Scholz M.; Yaseen Z.M.
منشور في: (2022)

Computational fluid dynamics study of Y3+-doped Ba(Ce,Zr)O3 based single channel proton ceramic fuel cell
بواسطة: Malik L.A.; Missnan M.I.; Hassan O.H.; Jani A.M.M.; Rahman H.A.; Luengchavanon M.; Osman N.
منشور في: (2023)

An overview of anaerobic treatment processes performance treating palm oil mill effluent (POME)-past, present and future
بواسطة: Mansor U.Q.A.; Yahya A.; Shafie N.F.A.; Roslan Q.I.; Manshor N.M.; Som A.M.; Nour A.H.; Hassan Z.; Yunus R.M.
منشور في: (2017)

Removal of phosphate by paper mill sludge: Adsorption isotherm and kinetic study
بواسطة: 2-s2.0-84904277598
منشور في: (2014)

OPTIMIZATION EXPERIMENTAL STUDY OF MACHINING ENERGY CONSUMPTION OF ZIG-ZAG MILLING CUTTING PATH USING RSM
بواسطة: Ghazali A.R.; Hemdi A.R.; Osman K.; Mustapha G.; Noor R.M.; Zubair A.F.; Othman M.; Yahaya M.I.; Rodzi A.S.M.
منشور في: (2023)

Advancing the measurement speed and accuracy of conventional BOTDA fiber sensor systems via SoC data acquisition
بواسطة: 2-s2.0-85185315618
منشور في: (2024)

Effect of gear ratio on the dc motor efficiency of a mini-fuel-cell vehicle cruising at constant speeds
بواسطة: 2-s2.0-84938602046
منشور في: (2015)

Stagnation-point Flow of a Hybrid Nanofluid Over an Exponentially Stretching Sheet with Zero Mass Flux Boundary Condition
بواسطة: Halim N.A.; Affrizal N.S.A.; Amin N.I.M.
منشور في: (2024)

The SiO2:TiO2 hybrid biodegradable nanolubricant for sustainable machining: The stability, thermo-physical and tribology perspectives
بواسطة: Hamzan, وآخرون
منشور في: (2025)

Simplified Kinetic Model of Heart Pressure for Human Dynamical Blood Flow
بواسطة: Saktioto; Defrianto; Thoibah A.; Soerbakti Y.; Syahputra R.F.; Syamsudhuha; Irawan D.; Hairi H.; Okfalisa; Amelia R.
منشور في: (2023)

Free Convection Boundary Layer Flow from a Vertical Truncated Cone in a Hybrid Nanofluid
بواسطة: Mohamed M.K.A.; Ishak A.; Pop I.; Mohammad N.F.; Soid S.K.
منشور في: (2022)

CO2 capture for environmental remediation with hollow fibre membrane: Impact of air gap and bore fluid ratio onto the morphology and performance
بواسطة: Zainuddin M.I.F.; Ahmad A.L.; Shah Buddin M.M.H.; Adnan M.A.
منشور في: (2025)

Overview of soft intelligent computing technique for supercritical fluid extraction
بواسطة: 2-s2.0-85161330110
منشور في: (2020)