Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting

QRコード

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting

This work presents experimental and numerical results of deposition of SiC coating using TIG torch method. The Taguchi approach was used to optimize the TIG torch melting process of duplex stainless steel for increasing the wear properties. The process variables used are current, voltage, transverse...

書誌詳細
出版年:	International Journal of Nanoelectronics and Materials
第一著者:	Paijan L.H.; Maleque M.A.; Rosli Z.M.; Abdollah M.F.; Mamat M.F.; Idriss A.N.M.
フォーマット:	論文
言語:	English
出版事項:	Universiti Malaysia Perlis 2024
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85214675206&doi=10.58915%2fijneam.v17iDecember.1605&partnerID=40&md5=1d8e112f1632317acd51bf26628507fd

類似資料

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
著者:: Paijan, 等
出版事項: (2024)

Effect of Temperature Variation on Wear Behaviour of Austenitic Stainless Steel
著者:: 2-s2.0-85012271921
出版事項: (2016)

Silicon carbide formation from natural woods
著者:: Hyie K.M.; Muda S.S.; Elias H.M.; Rahman N.L.A.; Kalam A.
出版事項: (2015)

Wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions
著者:: 2-s2.0-85082317767
出版事項: (2019)

Experimental Analysis on Grain Growth Kinetics of SS316L Austenitic Stainless Steel
著者:: Mat M.F.; Manurung Y.H.P.; Busari Y.O.; Adenan M.S.; Sulaiman M.S.; Muhammad N.; Mekanikal J.K.; Graf M.
出版事項: (2021)

Predicting The Melting Temperature Of Polymers Using Machine Learning
著者:: Fatriansyah J.F.; Mahardi H.L.; Rizky M.A.Y.; Surya R.D.; Federico A.; Surip S.N.
出版事項: (2024)

Response surface based model updating of TIG welded structure of hollow structural section (HSS) column
著者:: Shah M.A.S.A.; Yunus M.A.; Rani M.N.A.
出版事項: (2022)

Ad-Hoc network design with multiple metrics using Taguchi's loss function
著者:: Mohamed H.; Lee M.H.; Salleh S.; Sanugi B.; Sarahintu M.
出版事項: (2011)

Exploring the physical behavior of surface-functionalized two-dimensional Tungsten carbide/nitride MXenes
著者:: Ul Haq B.; Kim S.-H.; Ahmed R.; Taib M.F.M.; Rasool Chaudhry A.; Seddik T.; Laref A.
出版事項: (2024)

Mechanical Response and Failure Analysis of Stainless-Steel Beams Exposed to Elevated Temperatures
著者:: Hazizan N.A.; Wahid N.; Zakwan F.A.A.; Ismail R.; Hashim M.H.M.; Ahmad H.; Goh L.D.
出版事項: (2024)

Taste Masking Study of Cocoa Butter Fast Melt Tablet (FMT) Formulations Containing Memantine Hydrochloride
著者:: Liew K.B.; Chew Y.L.; Helal Uddin A.B.M.; Lee S.-K.; Lakshminarayanan V.; Janakiraman A.K.; Khalid S.H.; Ramanunny A.K.; Xia Y.
出版事項: (2024)

Synthesis of hybrid organic-inorganic hydrotalcite-like materials intercalated with duplex herbicides: The characterization and simultaneous release properties
著者:: 2-s2.0-85113537637
出版事項: (2021)

Effects of refrigerated air on tool wear
著者:: Gisip J.; Gazo R.; Stewart H.A.
出版事項: (2007)

Performance of Carbide Lime Waste Mortar via 24 Hours Accelerated CO2 Curing
著者:: Talip A.R.A.; Khalid N.H.A.; sam A.R.M.; Joudah Z.H.; Othman R.
出版事項: (2024)

Optimization of the preparation of palm kernel shell–derived activated carbon via Taguchi method for enhanced methylene blue removal
著者:: Zaini M.S.M.; Roslan S.Z.; Za’aim M.A.M.; Syed-Hassan S.S.A.
出版事項: (2025)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
著者:: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
出版事項: (2024)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
著者:: Rajendran R.C.; Anto T.; Agarwal A.; Ilunga M.; Jayamani E.; Natarajan V.D.
出版事項: (2024)

Exploring the reinforcing mechanism and micromechanical models for the interphase characteristics in melt mixed XLPE-fumed SiO2 nanocomposites
著者:: 2-s2.0-85127287523
出版事項: (2022)

Techniques of Direct Composite Build Ups in Managing Tooth Wear Cases: A Narrative Review
著者:: Lim G.S.; Lee W.M.; Foo K.R.
出版事項: (2024)

Optimisation of Palm Kernel Shell Activated Carbon for Carbon Dioxide Adsorption: Taguchi Approach
著者:: 2-s2.0-85163806127
出版事項: (2023)

ASSESSMENT OF TOOL NOSE WEAR USING SCANNED IMAGES OF CUTTING INSERTS
著者:: Lim T.Y.; Chiang E.P.; Woo Y.P.
出版事項: (2024)

Abrasive wear behavior of CNT-filled unidirectional kenaf-epoxy composites
著者:: 2-s2.0-85100480188
出版事項: (2021)

Optimization of Design Parameters using Taguchi Method for Thermal Stress Analysis in a 3D IC
著者:: Bin Sazali, 等
出版事項: (2024)

A methodology for facial measurement towards the establishment of ready-to-wear hijab sizing
著者:: 2-s2.0-84994399987
出版事項: (2016)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
著者:: Rajendran, 等
出版事項: (2024)

Photocatalytic degradation of methyl green dye by nitrogen-doped carbon quantum dots: Optimisation study by Taguchi approach
著者:: Abd Rani U.; Ng L.Y.; Ng Y.S.; Ng C.Y.; Ong Y.H.; Lim Y.P.
出版事項: (2022)

Effect of die and punch radius on springback of stainless steel sheet metal in the air V-die bending process
著者:: 2-s2.0-84938631780
出版事項: (2015)

Wear mechanism of TiCN and TiALN coated drill in drilling of carbon steel
著者:: 2-s2.0-84943328611
出版事項: (2015)

Role of WO3 on the conductivity, Judd-Ofelt and luminescence properties of 20K2O−xWO3−(78−x)TeO2−1Er2O3−1Yb2O3 glass system
著者:: Noor A.N.M.; Said D.; Naaim M.M.; Malek M.F.; Sutrisno M.S.; Zaid M.H.M.; Hisam R.
出版事項: (2025)

Optimization of the preparation of palm kernel shell-derived activated carbon via Taguchi method for enhanced methylene blue removal
著者:: Zaini, 等
出版事項: (2025)

Optimization of the preparation of palm kernel shell–derived activated carbon via Taguchi method for enhanced methylene blue removal
著者:: 2-s2.0-85217267363
出版事項: (2025)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
著者:: 2-s2.0-84971469649
出版事項: (2016)

Optimization of the preparation of activated carbon from palm kernel shell for methane adsorption using Taguchi orthogonal array design
著者:: 2-s2.0-84968649986
出版事項: (2016)

Effects of cryogenic treatment and refrigerated air on tool wear when machining medium density fiberboard
著者:: Gisip J.; Gazo R.; Stewart H.A.
出版事項: (2009)

Wear Properties of Acid and Silane Modified CNT Filled Hybrid Glass/Kenaf Epoxy Composites
著者:: 2-s2.0-105000088422
出版事項: (2018)

Hardhat-YOLO: A YOLOv5-based Lightweight Hardhat-Wearing Detection Algorithm in Substation Sites
著者:: 2-s2.0-85195077787
出版事項: (2024)

A preliminary study into the effect of oxide chemistry on the bonding mechanism of cold-sprayed titanium dioxide coatings on SUS316 stainless steel substrate
著者:: Omar N.I.B.; Mohamed S.B.; Yusuf Y.B.; Rahim T.B.A.; Mustafa Z.B.; Ismail S.B.; Bakar I.A.B.A.; Selvamani S.
出版事項: (2022)

Wear properties of nanoclay modified basalt fibre composites under dry adhesive sliding, two-body abrasive, and slurry pot erosive
著者:: 2-s2.0-85122698718
出版事項: (2022)

Long-term electricity demand forecasting for malaysia using artificial neural networks in the presence of input and model uncertainties
著者:: Tai V.C.; Tan Y.C.; Rahman N.F.A.; Che H.X.; Chia C.M.; Saw L.H.; Ali M.F.
出版事項: (2021)

ASSESSING NEO-M8N GPS-BASED WAYPOINT NAVIGATION PERFORMANCE FOR AN UNMANNED SURFACE VEHICLE
著者:: Thamrin N.M.; Misnan M.F.; Nizam M.M.D.; Saaid M.F.
出版事項: (2024)