Wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions

QR Code

Wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions

This study presents the investigation on tool wear mechanisms of PVD TiAlN coated tungsten carbide inserts during high-speed turning Inconel 718 under cryogenic and dry conditions. For cryogenic, the coolant used is liquid carbon dioxide (CO2) applied at a fixed flow rate and pressure. The investiga...

書目詳細資料
發表在:	Jurnal Tribologi
主要作者:	2-s2.0-85082317767
格式:	Article
語言:	English
出版:	Malaysian Tribology Society (Mytribos) 2019
在線閱讀:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85082317767&partnerID=40&md5=42406aa885601fee8f9d0e2b39142e38

相似書籍

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
由: Azhar, et al.
出版: (2024)

Effects of cryogenic treatment and refrigerated air on tool wear when machining medium density fiberboard
由: Gisip J.; Gazo R.; Stewart H.A.
出版: (2009)

Sustainable Machining of Hardened Inconel 718: A Comparative Study
由: Abdul Halim N.H.; Che Haron C.H.; Abdul Ghani J.
出版: (2020)

Sustainable Machining of Hardened Inconel 718: A Comparative Study
由: 2-s2.0-85085151295
出版: (2020)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
由: Rahman A.R.A.; Muhammad N.A.; Mat M.F.; Manurung Y.H.P.; Adenan M.S.; Busari Y.O.; Prajadhiana K.P.; Ginta T.L.; Triyono
出版: (2025)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
由: 2-s2.0-85215661119
出版: (2025)

Exploring the physical behavior of surface-functionalized two-dimensional Tungsten carbide/nitride MXenes
由: Ul Haq B.; Kim S.-H.; Ahmed R.; Taib M.F.M.; Rasool Chaudhry A.; Seddik T.; Laref A.
出版: (2024)

Wear properties of nanoclay modified basalt fibre composites under dry adhesive sliding, two-body abrasive, and slurry pot erosive
由: 2-s2.0-85122698718
出版: (2022)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
由: Paijan, et al.
出版: (2024)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
由: Paijan L.H.; Maleque M.A.; Rosli Z.M.; Abdollah M.F.; Mamat M.F.; Idriss A.N.M.
出版: (2024)

Classification of RTV-coated porcelain insulator condition under different profiles and levels of pollution
由: Salem A.A.; Al-Gailani S.A.; Amer A.A.G.; Alsharef M.; Bajaj M.; Zaitsev I.; Ngah R.; Ghoneim S.S.M.
出版: (2024)

Classification of RTV-coated porcelain insulator condition under different profiles and levels of pollution
由: 2-s2.0-85205528607
出版: (2024)

Effect of Coated Tungsten Disulfide (WS2) on Tapered Optical Fibre for Urea Detection
由: Burham N.; Bachok N.; Ali N.; Othman A.R.; Arsad N.; Awang A.H.; Isa N.M.; Li Z.
出版: (2024)

The effect of annealing time on tungsten-doped vanadium dioxide by using sol-gel spin coating method
由: 2-s2.0-85098535294
出版: (2020)

Wear mechanism of TiCN and TiALN coated drill in drilling of carbon steel
由: 2-s2.0-84943328611
出版: (2015)

Silicon carbide formation from natural woods
由: Hyie K.M.; Muda S.S.; Elias H.M.; Rahman N.L.A.; Kalam A.
出版: (2015)

Correction to: Classification of RTV-coated porcelain insulator condition under different profiles and levels of pollution (Scientific Reports, (2024), 14, 1, (22759), 10.1038/s41598-024-73520-7)
由: Salem A.A.; Al-Gailani S.A.; Amer A.A.G.; Alsharef M.; Bajaj M.; Zaitsev I.; Ngah R.; Ghoneim S.S.M.
出版: (2025)

Effects of refrigerated air on tool wear
由: Gisip J.; Gazo R.; Stewart H.A.
出版: (2007)

An Advanced Frequency Adaptive PLL for Grid Connected Inverters Under Abnormal Grid Conditions
由: Meraj S.T.; Yu S.S.; Hasan K.; Trinh H.; Shi P.
出版: (2023)

Influence of coal ash on the concrete properties and its performance under sulphate and chloride conditions
由: Mangi S.A.; Wan Ibrahim M.H.; Jamaluddin N.; Arshad M.F.; Khahro S.H.; Putra Jaya R.
出版: (2021)

An Advanced Frequency Adaptive PLL for Grid Connected Inverters Under Abnormal Grid Conditions
由: 2-s2.0-85185806966
出版: (2023)

Investigation into hot-mix asphalt moisture-induced damage under tropical climatic conditions
由: 2-s2.0-84887111562
出版: (2014)

INFLUENCE OF VENTILATION PLACEMENT ON THE COOLING EFFICIENCY OF LITHIUM-ION BATTERIES UNDER FORCED AIRFLOW CONDITIONS
由: Pahmi A.; Basri M.H.; Ismail N.I.; Azmi H.; Mat S.C.; Othman R.; Faris; Sharudin H.
出版: (2024)

HealthyHeart Data Visualization: Predicting Heart Condition Using Machine Learning
由: 2-s2.0-85163679107
出版: (2023)

A SWMR Algorithm Approach for the Vendor Managed Inventory Problem when Static Demand Rates
由: Abdul Rahim M.K.I.; Bolaji B.H.; Razalli M.R.; Nawi M.N.M.; Harahap A.Z.M.K.; Ahmad A.N.A.
出版: (2025)

Performance of Carbide Lime Waste Mortar via 24 Hours Accelerated CO2 Curing
由: Talip A.R.A.; Khalid N.H.A.; sam A.R.M.; Joudah Z.H.; Othman R.
出版: (2024)

Effect of cutting parameters on tool life during end milling of AISI 4340 under MQL condition
由: 2-s2.0-85122855909
出版: (2022)

Effect of Temperature Variation on Wear Behaviour of Austenitic Stainless Steel
由: 2-s2.0-85012271921
出版: (2016)

Influence of aluminium and tungsten impurities on reduced graphene oxide/zinc oxide nanocomposites humidity sensing performance
由: Subki, et al.
出版: (2025)

Influence of aluminium and tungsten impurities on reduced graphene oxide/zinc oxide nanocomposites humidity sensing performance
由: 2-s2.0-85219756566
出版: (2025)

Numerical investigation of fully confined RC column with carbon fiber reinforced polymer when expose to fire
由: 2-s2.0-85144557092
出版: (2023)

Chromium-tungsten heterogeneous catalyst for esterification of palm fatty acid distillate to fatty acid methyl ester
由: 2-s2.0-84939259215
出版: (2015)

ASSESSMENT OF TOOL NOSE WEAR USING SCANNED IMAGES OF CUTTING INSERTS
由: Lim T.Y.; Chiang E.P.; Woo Y.P.
出版: (2024)

Abrasive wear behavior of CNT-filled unidirectional kenaf-epoxy composites
由: 2-s2.0-85100480188
出版: (2021)

Bonding strength characteristics of FA-based geopolymer paste as a repair material when applied on opc substrate
由: Zailani W.W.A.; Bouaissi A.; Al Bakri Abdullah M.M.; Abd Razak R.; Yoriya S.; Mohd Salleh M.A.A.; Mohd Remy Rozainy M.A.Z.; Fansuri H.
出版: (2020)

DO YOU FEEL BETTER WHEN BUYING MORE? THE MODERATING EFFECT OF CONSUMER MOOD ON THE URGE TO BUY IMPULSIVELY
由: 2-s2.0-86000555104
出版: (2025)

A novel global MPPT technique to enhance maximum power from PV systems under variable atmospheric conditions
由: Hai T.; Zain J.M.; Muranaka K.
出版: (2023)

Review on drying methods for herbal plants
由: 2-s2.0-85134053574
出版: (2022)

A methodology for facial measurement towards the establishment of ready-to-wear hijab sizing
由: 2-s2.0-84994399987
出版: (2016)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
由: Rajendran, et al.
出版: (2024)