Effects of different polymerisation conditions using hybrid polymer on high turbidity suspensions

QR Code

Effects of different polymerisation conditions using hybrid polymer on high turbidity suspensions

Purpose: In this study, new hybrid polymers composed of Zinc chloride (ZnCl2), acrylamide and chitosan were prepared at different ratios and temperatures. The effects of pH and polymer dosage were examined for different polymers to observe their efficiency in the removal of turbid water. The polymer...

書目詳細資料
發表在:	World Journal of Engineering
主要作者:	2-s2.0-85118674018
格式:	Article
語言:	English
出版:	Emerald Publishing 2023
在線閱讀:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85118674018&doi=10.1108%2fWJE-06-2021-0372&partnerID=40&md5=08ccadc527816b7276a4d39494d4e984

相似書籍

Plant-based Tacca leontopetaloides biopolymer flocculant (TBPF) produced high removal of turbidity, TSS, and color for leachate treatment
由: 2-s2.0-85085559607
出版: (2020)

Gelation performance of PAM/PEI polymer gel with addition of retarder in high-salinity conditions
由: 2-s2.0-85122291610
出版: (2022)

Analysis of the kinematics and compliance of a passive suspension system using Adams car
由: 2-s2.0-84938594877
出版: (2015)

Reductive transformation of tetrachloroethene catalyzed by sulfide-cobalamin in nano-mackinawite suspension
由: 2-s2.0-84949132102
出版: (2015)

The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures
由: 2-s2.0-84907753679
出版: (2014)

Vibration control of semi-active suspension system using PID controller with advanced firefly algorithm and particle swarm optimization
由: 2-s2.0-85086743310
出版: (2021)

Unhole and open hole tensile properties of hybrid Kevlar/glass fiber polymer composites with different stacking sequence
由: 2-s2.0-85104183473
出版: (2020)

Investigation of Object Detection and Identification at Different Lighting Conditions for Autonomous Vehicle Application
由: 2-s2.0-85174971248
出版: (2023)

Optimizing Gaussian process regression (GPR) hyperparameters with three metaheuristic algorithms for viscosity prediction of suspensions containing microencapsulated PCMs
由: Hai T.; Basem A.; Alizadeh A.; Sharma K.; jasim D.J.; Rajab H.; Ahmed M.; Kassim M.; Singh N.S.S.; Maleki H.
出版: (2024)

Classification of RTV-coated porcelain insulator condition under different profiles and levels of pollution
由: 2-s2.0-85205528607
出版: (2024)

Automated nutrient screening system enables high-throughput optimisation of microalgae production conditions
由: 2-s2.0-84929335045
出版: (2015)

Classification of RTV-coated porcelain insulator condition under different profiles and levels of pollution
由: Salem A.A.; Al-Gailani S.A.; Amer A.A.G.; Alsharef M.; Bajaj M.; Zaitsev I.; Ngah R.; Ghoneim S.S.M.
出版: (2024)

Peri-implant conditions and levels of advanced glycation end products among patients with different glycemic control
由: 2-s2.0-85040720907
出版: (2018)

Effect of MWCNT surface functionalisation and distribution on compressive properties of kenaf and hybrid kenaf/glass fibres reinforced polymer composites
由: 2-s2.0-85094556985
出版: (2020)

Natural polymer/inorganic material based hybrid scaffolds for skin wound healing
由: 2-s2.0-84954028364
出版: (2015)

Effects of different iodide salts on the electrical and electrochemical properties of hybrid biopolymer electrolytes for dye-sensitized solar cells application
由: 2-s2.0-85120069238
出版: (2022)

A review on mechanical performance of hybrid natural fiber polymer composites for structural applications
由: 2-s2.0-85110037201
出版: (2021)

Natural polymer/inorganic material based hybrid scaffolds for skin wound healing
由: Ninan N.; Muthiah M.; Park I.-K.; Wong T.W.; Thomas S.; Grohens Y.
出版: (2015)

CHARACTERISATION OF HIGH PURITY RICE HUSK SILICA SYNTHESISED USING SOLVENT-THERMAL TREATMENT WITH DIFFERENT CONCENTRATION OF ACID LEACHING
由: 2-s2.0-85150031802
出版: (2023)

Hybrid filtering methods for feature selection in high-dimensional cancer data
由: 2-s2.0-85172876734
出版: (2023)

Fabrication of high performance pvdf hollow fiber membrane using less toxic solvent at different additive loading and air gap
由: 2-s2.0-85118483274
出版: (2021)

Stagnation-point Flow of a Hybrid Nanofluid Over an Exponentially Stretching Sheet with Zero Mass Flux Boundary Condition
由: Halim N.A.; Affrizal N.S.A.; Amin N.I.M.
出版: (2024)

Energy and cost management of different mixing ratios and morphologies on mono and hybrid nanofluids in collector technologies
由: 2-s2.0-85148618981
出版: (2023)

Effect of Operating Condition of Natural Dye Production from Red Spinach (Amaranthus Dubius ) using Solvent Extraction
由: Yahya A.; Sulaiman S.N.A.; Maryudi M.
出版: (2024)

HealthyHeart Data Visualization: Predicting Heart Condition Using Machine Learning
由: 2-s2.0-85163679107
出版: (2023)

Effects of reaction conditions on the emission behaviors of arsenic, cadmium and lead during sewage sludge pyrolysis
由: 2-s2.0-85017095242
出版: (2017)

Comparative Analysis of High-Strength Concrete Cylinders Reinforced with Varied Configurations of Carbon Fibre Reinforced Polymer Strips
由: Michael M.; Zakwan F.A.A.; Ismail R.; Ahmad H.; Wahid N.; Hashim N.H.
出版: (2024)

Energy and cost management of different mixing ratios and morphologies on mono and hybrid nanofluids in collector technologies
由: Tao H.; Aldlemy M.S.; Alawi O.A.; Kamar H.M.; Homod R.Z.; Mohammed H.A.; K. A. Mohammed M.; Mallah A.R.; Al-Ansari N.; Yaseen Z.M.
出版: (2023)

Effect of cutting parameters on tool life during end milling of AISI 4340 under MQL condition
由: 2-s2.0-85122855909
出版: (2022)

Classification of Mental Health Conditions in Reddit Post using Multinomial Naïve Bayes Algorithm
由: 2-s2.0-85219584809
出版: (2024)

The effect of various fiber orientations and boundary conditions on natural frequencies of laminated composite beam
由: Norman M.A.M.; Zainuddin M.A.; Mahmud J.
出版: (2018)

Analysis of the Optimum Performance for Polymer and Polymer–Nanocomposite-modified Asphalt by Using Multicriteria Decision Analysis
由: Alas M.; Albrka S.I.; Eltwati A.; Ali A.S.B.; Al Allam A.M.
出版: (2024)

Enzymatic Transesterification Using Different Immobilized Lipases and its Biodiesel Effect on Gas Emission
由: Mohamad Nor N.F.S.; Veny H.; Hamzah F.; Muhd Rodhi M.N.; Kusumaningtyas R.D.; Prasetiawan H.; Hartanto D.; Sulaiman S.; Sazali R.A.
出版: (2024)

Mechanical Properties of High-Volume Fly Ash Mortar Modified by Hybrid Carbon Nano Tube and Graphene Oxide
由: 2-s2.0-85214405159
出版: (2024)

Significance of Geometrical Condition in Preserving the Quality of TLS Measurement
由: 2-s2.0-85142173440
出版: (2022)

Effects of Silane Treatment on the Impact and Tensile Properties of Textile Waste Fiber Polymer Composite
由: 2-s2.0-85104423321
出版: (2021)

Clay–polymer nanocomposites: Progress and challenges for use in sustainable water treatment
由: 2-s2.0-85072247183
出版: (2020)

Characterization of polymer electrolytes by dielectric response using electrochemical impedance spectroscopy
由: 2-s2.0-85058280997
出版: (2018)

Evaluation of rail head surface repair using SMAW process with pre heating condition
由: Mat M.F.; Musah A.F.; Tham A.G.; Sulaiman S.A.
出版: (2015)

Enhancing Cognitive Frailty Prediction Accuracy Using Conditional Generative Adversarial Networks(CGAN)
由: Ibrahim F.N.A.; Badruddin N.; Ramasamy K.
出版: (2024)