Numerical heat transfer analysis of waste heat exchanger for exhaust gas energy recovery

QR Code

Numerical heat transfer analysis of waste heat exchanger for exhaust gas energy recovery

Waste heat is heat that is usually thrown into the environment even though it could still be reused for some useful and economic purpose. For example, any exhaust gas stream with a temperature of above 80°C has the potential for significant waste heat recovery. Therefore, an attempt to reuse the exh...

Full description

Bibliographic Details
Published in:	Journal of Mechanical Engineering and Sciences
Main Author:	2-s2.0-84938581377
Format:	Article
Language:	English
Published:	Universiti Malaysia Pahang 2015
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84938581377&doi=10.15282%2fjmes.8.2015.24.0146&partnerID=40&md5=553418cff71507e433c5894d06185ab5

Similar Items

AI-Enhanced Generative Design for Efficient Heat Exchangers in Thermoelectric Generators: Revolutionizing Waste Heat Recovery in Thermoelectricity
by: Hughes A.R.M.; Singh B.S.B.; Remeli M.F.; Peixer G.F.; Singh W.K.R.
Published: (2024)

Passive Heat Recovery System Using Combination of Heat Pipe and Thermoelectric Generator
by: 2-s2.0-84947053908
Published: (2015)

Thermal analysis of building benefits from PCM and heat recovery- installing PCM to boost energy consumption reduction
by: 2-s2.0-85135687884
Published: (2022)

The Bibliometric Review on Convective Heat Transfer of Nanofluid
by: 2-s2.0-85199919160
Published: (2024)

Computational analysis of fluid flow and convection heat transfer characteristics of multiple heat sink for electrical power stack cooling
by: Azizan N.A.C.; Norazam N.F.; Tijani A.S.
Published: (2025)

Computational analysis of fluid flow and convection heat transfer characteristics of multiple heat sink for electrical power stack cooling
by: Azizan, et al.
Published: (2025)

Heat Transfer in Hartmann Flow of Hybrid Nano-Jeffrey Fluid with Heat Absorption and Thermal Radiation Impact
by: 2-s2.0-85184685034
Published: (2023)

Numerical Study of Heat Transfer Enhancement Using Al2O3–Graphene/Water Hybrid Nanofluid Flow in Mini Tubes
by: 2-s2.0-85066624109
Published: (2019)

ENHANCING HEAT TRANSFER IN CHANNEL FLOW USING SYNTHETIC JETS
by: Azmi H.; Basri M.H.; Ismail N.I.; Pahmi M.A.A.H.; Mat S.C.; Othman R.
Published: (2024)

Heat transfer analysis of carbon nanotubes flow over a deformable cylinder with viscous dissipation
by: 2-s2.0-85143837359
Published: (2022)

MHD flow and heat transfer over a radially stretching/shrinking disk
by: 2-s2.0-85041697565
Published: (2018)

Experimental and theoretical study of thermoelectric generator waste heat recovery model for an ultra-low temperature PEM fuel cell powered vehicle
by: 2-s2.0-85065624449
Published: (2019)

Thermoelectric power generations from vehicle exhaust gas with TiO2 nanofluid cooling
by: 2-s2.0-85085129681
Published: (2020)

Study on convective heat transfer and pressure drop of MWCNTs/water nanofluid in mini-tube
by: 2-s2.0-85045152151
Published: (2019)

A systematic review of metal foam and heat pipe enhancement in Latent Heat Thermal Energy Storage system
by: 2-s2.0-85141261276
Published: (2022)

The effect of vortex generator base length on thermal hydraulic performance across fin-and-tube heat exchanger
by: Salleh M.F.M.; Wahid M.A.; Ghazanfari S.A.
Published: (2017)

Circulation cleaning of a plate heat exchanger fouled by tomato juice: II. Cleaning with caustic soda solution
by: 2-s2.0-0019906606
Published: (1982)

Numerical investigation of double-diffusive convection in an open cavity with partially heated wall via heatline approach
by: 2-s2.0-84945288095
Published: (2016)

A low-temperature driven organic Rankine cycle for waste heat recovery from a geothermal driven Kalina cycle: 4E analysis and optimization based on artificial intelligence
by: 2-s2.0-85142513212
Published: (2023)

Experiment on forced convective heat transfer enhancement using MWCNTs/GNPs hybrid nanofluid and mini-tube
by: 2-s2.0-85028857654
Published: (2017)

An Integrated Heat Recovery System Design for a Fuel Cell Buggy With Hydrogen Preheating and Thermoelectric Generator
by: Hamdan M.H.; Mohamed W.A.N.W.; Aminudin M.A.; Kamarudin S.K.; Zakaria I.A.; Singh B.
Published: (2025)

An Integrated Heat Recovery System Design for a Fuel Cell Buggy With Hydrogen Preheating and Thermoelectric Generator
by: Hamdan, et al.
Published: (2025)

Development of graft earthenware ceramic firing stove design from the usage of wasted gas fire and heat from tunnel stove in stoneware ceramic firing process
by: Ponimin; Hariyanto; Isa B.B.; Suharmanto
Published: (2020)

Impact of Nanoparticles Shapes on Magnetohydrodynamic Flow and Heat Transfer of Casson Hybrid Nanofluids over a Moving Inclined Plate
by: 2-s2.0-85178943983
Published: (2023)

Stagnation-Point Flow and Heat Transfer over an Exponentially Stretching/Shrinking Inclined Plate in a Micropolar Fluid
by: Bakar F.N.A.; Soid S.K.; Norzawary N.H.A.; Sohut F.H.
Published: (2024)

Integrated SnSSe bulk and monolayer as industrial waste heat thermoelectric materials
by: 2-s2.0-85090129919
Published: (2021)

Thermos-physical properties and heat transfer characteristic of copper oxide–based ethylene glycol/water as a coolant for car radiator
by: 2-s2.0-85216031966
Published: (2004)

Soret and dufour effects on unsteady boundary layer flow and heat transfer in copper-water nanofluid over a shrinking sheet with partial slip and stability analysis
by: 2-s2.0-85067975687
Published: (2019)

Thermos-physical properties and heat transfer characteristic of copper oxide–based ethylene glycol/water as a coolant for car radiator
by: Tijani A.S.; Azreen Bin Mohd Yusoff M.Y.
Published: (2004)

Flow and Heat Transfer Analysis on Reiner-Philippoff Fluid Flow over a Stretching Sheet in the Presence of First and Second Order Velocity Slip and Temperature Jump Effects
by: 2-s2.0-85146444848
Published: (2023)

Integration of solar heating systems for low-temperature heat demand in food processing industry – A review
by: 2-s2.0-85106354489
Published: (2021)

The Properties of Hydroxyapatite Derived from Carbonate Eggshell Waste Through Ball Milling and Heat Treatment Method
by: Ghouse R.M.; Natasha A.N.; Shahedan N.F.; Ramesh S.; Bang L.T.
Published: (2024)

Thermos-physical properties and heat transfer characteristics of water/anti-freezing and Al2O3/CuO based nanofluid as a coolant for car radiator
by: 2-s2.0-85032340119
Published: (2018)

Enthalpy Method for one dimensional heat conduction
by: Nasrudin F.S.M.; Mahadi S.
Published: (2018)

Enhancing the performance of a Novel multigeneration system with electricity, heating, cooling, and freshwater products using genetic algorithm optimization and analysis of energy, exergy, and entransy phenomena
by: 2-s2.0-85151658226
Published: (2023)

Effects of ethanol blends on gasoline engine performance and exhaust emissions
by: Abdullah N.R.; Zaharin M.S.M.; Mamat A.M.I.; Nawi M.R.M.; Sharudin H.
Published: (2015)

The Effects of an Aligned Magnetic Field on Nanofluid Flow with Newtonian Heating
by: 2-s2.0-85182490402
Published: (2024)

Innovative proposal of energy scheme based on biogas from digester for producing clean and sustainable electricity, cooling and heating: Proposal and multi-criteria optimization
by: 2-s2.0-85141291791
Published: (2022)

Remote Vehicle Exhaust Detection Based on Integrated Deep Learning Models for Environmental Monitoring
by: 2-s2.0-85219389947
Published: (2025)

Automatic Control of Microwave Heating System Based on PID and Evolutionary Computation
by: Idris, et al.
Published: (2024)