Effect of Combined Carbon Nano Tubes and Graphene Oxide on the High-Volume Fly Ash Mortar Properties

Effect of combined carbon nano tubes (CNTs) and graphene oxide (GO) on the high-volume fly ash mortar (HVFAM) properties was presented in this paper. The characteristic of HVFAM mixes were first evaluated using slump flow tests. Then, mechanical properties and microstructure of HVFAM were performed....

全面介紹

書目詳細資料
發表在:Journal of Physics: Conference Series
主要作者: 2-s2.0-85214030285
格式: Conference paper
語言:English
出版: Institute of Physics 2024
在線閱讀:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85214030285&doi=10.1088%2f1742-6596%2f2916%2f1%2f012006&partnerID=40&md5=0dbb5ecd61f48017d71c9caaa9456826
實物特徵
總結:Effect of combined carbon nano tubes (CNTs) and graphene oxide (GO) on the high-volume fly ash mortar (HVFAM) properties was presented in this paper. The characteristic of HVFAM mixes were first evaluated using slump flow tests. Then, mechanical properties and microstructure of HVFAM were performed. A scanning electron microscope (SEM) was used to observe the microstructure of HVFAM. A high-volume fly ash was taken as 60% cement replacement. Mortar specimens were produced by adding the combined 0.01% CNTs and GO contents of 0.01% - 0.05% using cement to water ratio of 0.46. The results of study showed that the combined CNTs and GO have substantial impact on the properties of HVFAM. It was further confirmed that adding the combined CNTs and GO cause the microstructure of HVFAM mixes become more compact and the pores that develop become smaller. In such a way, the bridging effect of combined CNTs and GO have successfully reduced the growth and formation of cracks that could led to an increase in the HVFAM performance. © 2024 Institute of Physics Publishing. All rights reserved.
ISSN:17426588
DOI:10.1088/1742-6596/2916/1/012006