Virtual model of kenaf bast fibres based on solid mechanics and finite element study

QR رمز

Virtual model of kenaf bast fibres based on solid mechanics and finite element study

Kenaf fibres are gaining traction as a promising eco-friendly material due to their renewability and impressive mechanical strength. This study explored kenaf's potential to replace traditional materials by investigating its microstructure using advanced techniques like Scanning Electron Micros...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	BIOSYSTEMS ENGINEERING
المؤلفون الرئيسيون:	Hanipah, Suhaiza Hanim; Hassan, Nur Farah Najia C.; Talib, Ahmad Tarmezee; Mohammed, Mohd Afandi P.; Wakisaka, Minato; Abdullah, Zalizawati
التنسيق:	مقال
اللغة:	English
منشور في:	ACADEMIC PRESS INC ELSEVIER SCIENCE 2025
الموضوعات:	Agriculture
الوصول للمادة أونلاين:	https://www-webofscience-com.uitm.idm.oclc.org/wos/woscc/full-record/WOS:001422579900001

مواد مشابهة

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
بواسطة: Hanipah S.H.; C. Hassan N.F.N.; Talib A.T.; P Mohammed M.A.; Wakisaka M.; Abdullah Z.
منشور في: (2025)

Comparative Assessment of Fuzzy Logic and PI Controllers for Ratio Control in Liquid Flow System
بواسطة: Abdullah, وآخرون
منشور في: (2024)

Isothermal crystallization kinetics and mechanical properties of PLA/Kenaf biocomposite: Comparison between alkali treated kenaf core and bast reinforcement
بواسطة: 2-s2.0-85129309927
منشور في: (2022)

Retting process of some bast plant fibres and its effect on fibre quality: A review
بواسطة: 2-s2.0-84856415290
منشور في: (2011)

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure
بواسطة: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Nazeri M.N.; Shuib S.
منشور في: (2024)

Effect of MWCNT surface functionalisation and distribution on compressive properties of kenaf and hybrid kenaf/glass fibres reinforced polymer composites
بواسطة: 2-s2.0-85094556985
منشور في: (2020)

The Effect of Polysulfone-nanosilica Coating on Mechanical Properties of Kenaf Fibre-Reinforced Polymer Composites
بواسطة: Azhar, وآخرون
منشور في: (2024)

Effect of silane treatments on mechanical performance of kenaf fibre reinforced polymer composites: a review
بواسطة: 2-s2.0-85122545487
منشور في: (2021)

Properties of kenaf/textile waste fibre hybridisation in a carbon nanotubes modified matrix; [Eigenschaften der Kenaf/Textil-Abfallfaser-Hybridisierung in einer Kohlenstoff-Nanoröhrchen-modifizierten Matrix]
بواسطة: 2-s2.0-85126475914
منشور في: (2022)

Virtual is Vital: The Strategies, Design, and Attendee Engagement of Virtual Events
بواسطة: 2-s2.0-85125917346
منشور في: (2021)

Finite element model updating on structural components of simplified model of aircraft pylon
بواسطة: Bahari A.R.; Yunus M.A.; Rani M.N.A.; Shah M.A.S.A.; Mirza W.I.I.W.I.
منشور في: (2022)

Crash Investigation on Frontal Vehicle Chassis Frame using Finite Element Simulation
بواسطة: 2-s2.0-85141464799
منشور في: (2022)

Tensile and flexural properties of silica nanoparticles modified unidirectional kenaf and hybrid glass/kenaf epoxy composites
بواسطة: 2-s2.0-85096214073
منشور في: (2020)

A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant
بواسطة: Al-Tam B.Y.; Ramlee M.H.; Wahab A.A.; Seng G.H.; Abdullah A.H.
منشور في: (2023)

Finite element-based fatigue life prediction of a load-carrying cruciform joint
بواسطة: 2-s2.0-84938634562
منشور في: (2015)

Non-immersive virtual reality for malay and islamic world museum melaka: Effects from COVID-19 pandemic
بواسطة: Samah K.A.F.A.; Nasaruddin N.I.S.; Afandi M.A.R.; Rahim N.Z.A.; Rum S.F.M.; Saman F.I.
منشور في: (2021)

Determining hyperelastic parameters of human skin using 2D finite element modelling and simulation
بواسطة: 2-s2.0-84867919926
منشور في: (2012)

Policy gaps in the virtual world
بواسطة: Annamalai M.; Ehsan K.M.; Awang N.S.N.; Ahmad N.A.I.N.
منشور في: (2010)

Biomechanical Evaluation of Three-Dimensional Printed Leg Orthosis for Ankle Fixation: Finite Element and Thermal Analysis
بواسطة: Mohd Salaha Z.F.; Jauhari Efendie S.N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
منشور في: (2024)

Natural Frequencies Prediction of Hybrid Composite Laminate based on Finite Element Simulation and Artificial Neural Network
بواسطة: 2-s2.0-85219506859
منشور في: (2024)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
بواسطة: 2-s2.0-85170094598
منشور في: (2023)

A review on behavior, material properties and finite element simulation of concrete tunnel linings under fire
بواسطة: 2-s2.0-85129768015
منشور في: (2022)

TOPOLOGY OPTIMIZATION AND MECHANICAL PROPERTIES STUDIES ON TOTAL KNEE REPLACEMENT (TKR) USING FINITE ELEMENT SIMULATION METHOD
بواسطة: Manap M.F.A.; Zainuddin P.N.B.; Ismail N.F.; Zubair A.F.; Halidi S.N.A.; Ismail H.
منشور في: (2023)

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study
بواسطة: 2-s2.0-85148865825
منشور في: (2023)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
بواسطة: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
منشور في: (2024)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
بواسطة: 2-s2.0-85132112562
منشور في: (2022)

Virtual desktop environment on Cloud computing platform
بواسطة: Fuzi M.F.M.; Hamid R.S.; Ahmad M.A.
منشور في: (2014)

Impacted of vacuum bag woven kenaf/fiberglass hybrid composite
بواسطة: 2-s2.0-84921647801
منشور في: (2014)

Flexible solid-like electrolytes with ultrahigh conductivity and their applications in all-solid-state supercapacitors
بواسطة: 2-s2.0-85052759207
منشور في: (2018)

Optimization of Spot Weld Joining Parameters for Dissimilar Plate Materials through Finite Element Model Updating and Response Surface Methodology
بواسطة: 2-s2.0-85213279061
منشور في: (2024)

Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model
بواسطة: 2-s2.0-85159289861
منشور في: (2023)

Investigation of the effect of Berkovich and Cube Corner indentations on the mechanical behavior of fused silica using molecular dynamics and finite element simulation
بواسطة: 2-s2.0-85121742138
منشور في: (2022)

Operational modal analysis and finite element model updating of ultra-high-performance concrete bridge based on ambient vibration test
بواسطة: 2-s2.0-85129912488
منشور في: (2022)

Gauging Students’ Feedback on the Use of Virtual Reality in Learning
بواسطة: Arshad N.I.; Mohamed Ariff M.I.; Amiruddin A.A.B.; Sugathan S.K.; Mokhtar N.I.; Mohd Ariffin M.
منشور في: (2024)

Gauging Students’ Feedback on the Use of Virtual Reality in Learning
بواسطة: 2-s2.0-85217930415
منشور في: (2024)

Abrasive wear behavior of CNT-filled unidirectional kenaf-epoxy composites
بواسطة: 2-s2.0-85100480188
منشور في: (2021)

Single passage CFD analysis for non radial fibre element of low pressure turbine
بواسطة: Ahmad B.; Fattah A.; Bin Mamat A.M.I.
منشور في: (2015)

The Effect of Fibre Orientation on the Density and Tensile Properties of Basalt Fibre/Epoxy Composites
بواسطة: Abdua A.N.F.; Ibrahim N.N.I.N.
منشور في: (2025)

The Effect of Fibre Orientation on the Density and Tensile Properties of Basalt Fibre/Epoxy Composites
بواسطة: 2-s2.0-85215674027
منشور في: (2025)

Evaluation of physical, mechanical, and thermal properties of woven kenaf/bio-epoxy composites
بواسطة: Abare A.Y.; Jawaid M.; Hamid N.H.; Bakar B.F.A.; Ismail A.S.; Sarmin S.N.; Fouad H.; Midani M.
منشور في: (2023)